Macro For Paste Values And Transpose
Mar 11, 2009
I want to make a macro that I can copy a column of numbers, select a cell... then run the macro - which will transpose them and paste the values.
I've tried to make this by Recorder... but I keep getting an error.
Run-time error 1004
Paste-Special method of Range class failed.
I've seen other people in the past post this questions, but it seems noone has solved it!
Sub Transpose()
'
' Transpose Macro
' Macro recorded 11/03/2009
'
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=True
End Sub
View 9 Replies
ADVERTISEMENT
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Aug 11, 2014
I think I have a very straight forward problem, I'm copying about 400 values from one workbook to another (from vertical range to horizontal range) and I currently have about 400 lines of code in order to do this. Below I've pasted the code I'm using now but the macro takes an estimated 30 seconds to run. I figure if I can reduce the number of lines the macro will run a lot faster
RowCount = openWb.Sheets("Library Raw Shear Rates").Range("A3").CurrentRegion.Rows.Count
With openWb.Sheets("Library Raw Shear Rates").Range("A3")
[Code]......
View 3 Replies
View Related
Mar 11, 2014
I would like to create/use a copy command in the Quick Access Toolbar that combines Paste Values and Transpose into a single command. Have tried recording a macro but it becomes specific to the individual workbook that I'm accessing and it copies the formula from that last cell that I copied from. Problem is that I have 19 workbooks to deal with and would like to save some keystrokes.
View 4 Replies
View Related
May 15, 2014
see the attached file below. I have monthly precipitation data for yrs 1950-1999. I need to have the data formatted such that the precipitation data is copy/pasted into one single column, going all the way from jan 1950 to feb 1950 (next row) to mar 1950 (next row).....dec 1999 (last row). On occasion, I will also have data for shorter/longer time periods. the macro code I'd need to take this data and line it all up into one single column?
View 7 Replies
View Related
May 1, 2013
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
View 1 Replies
View Related
Oct 26, 2012
I have a long (190,000) list of customer data, all in Column A (unfortunately with blank rows among it, but working now to fix that).
Down the column, individual customers are bookended by a "adf" and a "/adf". (these have open and close brackets like HTML code, but I cannot reproduce them in this forum).
For each customer, I need to find the rows that begin with (brackets spelled out since I do not know how to show them):
1. [open bracket] vehicle status
2. name part=3D"first"[close bracket]
3. [open bracket]name part=3D"last"[close bracket]
4. [open bracket]email[close bracket]
5.[open bracket]phone time=3D
6.[open bracket] name part=3D
And transpose only those rows it into columns.There is a dynamic number of rows for each customer, so there's no way to simply count and transpose, as the columns would all be mis-entered.Somehow it needs to recognize those 6 row items, and transpose those values only, with the and the only telltale of a start and finish of a specific customer.
EDIT: How about a macro to delete all rows except those that contain those partial values above?
View 3 Replies
View Related
Sep 17, 2009
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
View 13 Replies
View Related
Jul 24, 2006
I use the Paste Value shortcut button that I've added to my toolbar in Excel. Just as regularly, I also need to do a Paste Special, Values Only with the Transpose option selected. Is there a way to create my own shortcut icon and build code to do this?
View 9 Replies
View Related
Apr 23, 2009
I have two excel tabs on a spreadsheet, one titled "Reviews" and one titled "Details". On my Reviews tab, I have:
A B C D
1 0 0 1
0 0 0 0
1 1 1 1
. . . .
. . . .
etc.. On my Details tab, I have
A 1 0 1 . . .
B 0 0 1 . . .
C 0 0 1 . . .
D 1 0 1 . . .
(The same information, but presented in different ways). I'm trying to continue to make my Reviews tab as long as possible to match my Details tab but when I drag the cross to continue the pattern, it doesn't follow what I need it to. How can I continue my Review tab down for 600 or so fields to match my Details tab even though they are both in different layouts?
View 14 Replies
View Related
Sep 12, 2009
I have over 300 lines of data that I need to transpose from columns to rows and I am not sure the best way to do it.
I can do it manually 125 times using paste special and transpose and get the results I need but I am thinking there must be a better way.
Example spread sheet inclosed. Column A is what I have - Column C-F is what I need.
View 8 Replies
View Related
Dec 30, 2009
I m new to macro and I need to copy the data from 49 cells value which are
present in Two Rows to be converted into TWO columns and 48 rows
I have run a macro for this and I got
Sub Macro4()
'
' Macro4 Macro
'
'
Sheets("WRIGLEY011209").Select
Range("C1:AX2").Select
Selection.Copy
Sheets("Sheet3").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
Range("A1").Select
Sheets("WRIGLEY011209").Select
Range("A2:B2").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet3").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("A1:B48"), Type:=xlFillDefault
Range("A1:B48").Select
End Sub
View 9 Replies
View Related
Jan 24, 2008
Is there a simple way to combine Paste Link and the Paste Transpose function? I receive a lot of data in rows that I need to put in columns for display purposes. Using transpose is great for doing that but I would like to link it using paste link so I don't have to keep doing each time the data changes. I have recorded macros to see what is happening when I perform the operations seperately as shown below but have been unable to combine them.
Range("A44").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
' need to combine with this
Range("A44").Select
ActiveSheet.Paste Link:=True
View 7 Replies
View Related
May 21, 2008
How to make a short cut or hot key to do a paste special transpose? Dealing with a lot of data. Want to program it to ctr+f or something of that nature...
View 7 Replies
View Related
Feb 15, 2012
Average formula that will give an accurate answer. My issue is that I need an average of what has been entered rather than for the entire selection. I have paste link transposed the data as it needs to run on Excel 2003 which can only hold 30 items in the Average(number1, number 2 ... etc) and I need 52. My problem occurs when the data is paste linked all blank cells appear as a Zero therefore increasing the count of the average and providing a wrong answer.
Eg when (1, 2, 0, 3) Average = 1.5 is entered the formula works out (1, 2, 0, 3, 0, 0, 0, 0, 0, 0, etc) Average = 0.12 because it divides by 52 instead of 4. As you can see I can't ignore zeros as they are a possible input. What would be perfect is for the paste link to paste the blank cells instead of the providing a zero then the plan =Average(B3:B55) would be fine.
(Note: the new entered data is on the same row but different columns hence the reason for the paste link transpose to get all the data in one column)
View 2 Replies
View Related
Apr 8, 2014
I need to copy and paste transpose, some over 100 values, but I want to add a comma after each value, so they can be put into JD Edwards for running a report.
View 3 Replies
View Related
Jun 16, 2014
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
Sub Macro5()
'' Macro5 Macro
Range("D2:D25").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet2").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
[code].....
View 3 Replies
View Related
Mar 14, 2014
The macro below will copy another tab and rename it based on the formula results in a a range, and this works perfectly. However, I also want it to take that value that was used to rename the sheet and paste(value) into the corresponding sheet in the range B8:M8. The code that I have so far is below, but I'm not sure how to tackle this second part.
Code:
Sub CopyTemplate()
'
' CopyTemplate Macro
'
Dim rcell As Range
Dim Sheet1 As Worksheet
Set sheet1 = ActiveSheet
[Code]...
View 1 Replies
View Related
May 8, 2007
I have been using the following code but need help in editing it.
Sub PasteValues()
Dim cl As Range
ColRef = InputBox("Insert Column Range - Paste Formulas to Values")
For Each cl In Range(ColRef & "1:" & ColRef & Range(ColRef & "5000").End(xlUp).Row)
cl = cl.Value
Next cl
End Sub
I want it to do the same thing by pasting values throughout a column, but I need it to skip cells if column A is empty.
I have attempted to edit the code by implementing previous code written for the opposite situation where a formula is pasted only if data exists in A, but was unable to get it to work. Here is that code.
Sub CentralDivision()
Dim ws As Worksheet
Dim strCol As String
Dim Cell As Range, Rng As Range
Application.ScreenUpdating = False
Set ws = Worksheets("CENTRAL DIVISION-2007")
strCol = InputBox("Entrer the column you want the formula in please.", "ENTER THE COLUMN", "Your Column Here")................
View 9 Replies
View Related
Jul 10, 2012
I need a formula to transpose rows to columns of a large table. The transpose array formula is not working for me. I know there is a column and row function formula to do this, but I can't remember it.
View 3 Replies
View Related
Mar 2, 2012
I have the attached macro that runs goes through files in a folder and "flattens" (removes formula to make them values) and deletes a worksheet.
I was wondering if the macro can flatten only a specified range in the "Master assignment sheet".
I want the macro to only paste/values in range B1:E4500 and G1:G4500.
Code:
Sub Modify_Files()
'Opens all files in the current folder.
'Unprotects Master assignment sheet and transforms all formulas to values.
'Deletes sheet Zip codes.
Dim Filename As String
Dim WB As Workbook
[Code] ......
View 1 Replies
View Related
Jun 8, 2006
found a great macro which copies data from multiply worksheets and pasts them onto master sheet.
I have adjusted the macro to my spreadsheet, but my macro should past formulas as values.
View 4 Replies
View Related
Nov 17, 2008
Twelve months of Data.
Each month in Columns
like so:
The labels are on the left.
The data is in each column to the right.
From column 2 to the end of the sheet at far right.
Family Size
One: 1 3
Two: 2 1
Three: 1 2
Four: 1 1.....................
View 9 Replies
View Related
Jun 11, 2014
So I have two cells D15 and C15.
I simple want to copy there values (There paste links)
And paste them into the next blank row between D/E17/ and D/E26.
View 1 Replies
View Related
Nov 29, 2011
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
View 3 Replies
View Related
Oct 13, 2009
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
View 10 Replies
View Related
Sep 17, 2012
On Sheet1, I have a list of names in Column A, with a corresponding value in Column B
NAME
VALUE
Alpha
3
Beta
2
Gamma
1
Delta
2
On Sheet2, I have a list of items that need to be assigned based on the values on Sheet1 (Assign to column would be blank, filled in by the macro/formula)
ITEM
ASSIGN TO
1
Alpha
2
Alpha
3
Alpha
4
Beta
[code]....
best way to automate the data on Sheet2? The items can be assigned in any order, it just needs to match the count on Sheet1.
View 4 Replies
View Related
Jan 8, 2013
I'm trying to use a macro that will copy & paste values from one workbook to another. Everything works fine until I try to get it to Paste to next available row.
It worked the first time, but after that it jumps, several hundred rows at a time.
This is what I have so far:
Code:
Sub CopyData()
Workbooks.Open Filename:="S:Production OfficeMonthly KPI Reports.xlsm", ReadOnly:=False
Windows("Weekly KPI Plan.xlsm").Activate
Worksheets("Data Input").Select
Worksheets("Data Input").[A4:AT650].Select
[Code]....
View 3 Replies
View Related
Jun 28, 2009
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies
View Related
Nov 9, 2012
Not sure if it's me or a new change in excel 2010, yet creating a simple macro as listed below does not work.
Outside of macro I will select a range of data and copy.
Then, using macro I'd like i to perform: paste special values, in the current cell
View 5 Replies
View Related
