Paste Values Macro
May 8, 2007
I have been using the following code but need help in editing it.
Sub PasteValues()
Dim cl As Range
ColRef = InputBox("Insert Column Range - Paste Formulas to Values")
For Each cl In Range(ColRef & "1:" & ColRef & Range(ColRef & "5000").End(xlUp).Row)
cl = cl.Value
Next cl
End Sub
I want it to do the same thing by pasting values throughout a column, but I need it to skip cells if column A is empty.
I have attempted to edit the code by implementing previous code written for the opposite situation where a formula is pasted only if data exists in A, but was unable to get it to work. Here is that code.
Sub CentralDivision()
Dim ws As Worksheet
Dim strCol As String
Dim Cell As Range, Rng As Range
Application.ScreenUpdating = False
Set ws = Worksheets("CENTRAL DIVISION-2007")
strCol = InputBox("Entrer the column you want the formula in please.", "ENTER THE COLUMN", "Your Column Here")................
View 9 Replies
ADVERTISEMENT
Sep 17, 2009
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
View 13 Replies
View Related
Mar 14, 2014
The macro below will copy another tab and rename it based on the formula results in a a range, and this works perfectly. However, I also want it to take that value that was used to rename the sheet and paste(value) into the corresponding sheet in the range B8:M8. The code that I have so far is below, but I'm not sure how to tackle this second part.
Code:
Sub CopyTemplate()
'
' CopyTemplate Macro
'
Dim rcell As Range
Dim Sheet1 As Worksheet
Set sheet1 = ActiveSheet
[Code]...
View 1 Replies
View Related
Mar 2, 2012
I have the attached macro that runs goes through files in a folder and "flattens" (removes formula to make them values) and deletes a worksheet.
I was wondering if the macro can flatten only a specified range in the "Master assignment sheet".
I want the macro to only paste/values in range B1:E4500 and G1:G4500.
Code:
Sub Modify_Files()
'Opens all files in the current folder.
'Unprotects Master assignment sheet and transforms all formulas to values.
'Deletes sheet Zip codes.
Dim Filename As String
Dim WB As Workbook
[Code] ......
View 1 Replies
View Related
Mar 11, 2009
I want to make a macro that I can copy a column of numbers, select a cell... then run the macro - which will transpose them and paste the values.
I've tried to make this by Recorder... but I keep getting an error.
Run-time error 1004
Paste-Special method of Range class failed.
I've seen other people in the past post this questions, but it seems noone has solved it!
Sub Transpose()
'
' Transpose Macro
' Macro recorded 11/03/2009
'
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=True
End Sub
View 9 Replies
View Related
Jun 8, 2006
found a great macro which copies data from multiply worksheets and pasts them onto master sheet.
I have adjusted the macro to my spreadsheet, but my macro should past formulas as values.
View 4 Replies
View Related
Jun 11, 2014
So I have two cells D15 and C15.
I simple want to copy there values (There paste links)
And paste them into the next blank row between D/E17/ and D/E26.
View 1 Replies
View Related
Nov 29, 2011
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
View 3 Replies
View Related
Oct 13, 2009
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
View 10 Replies
View Related
Sep 17, 2012
On Sheet1, I have a list of names in Column A, with a corresponding value in Column B
NAME
VALUE
Alpha
3
Beta
2
Gamma
1
Delta
2
On Sheet2, I have a list of items that need to be assigned based on the values on Sheet1 (Assign to column would be blank, filled in by the macro/formula)
ITEM
ASSIGN TO
1
Alpha
2
Alpha
3
Alpha
4
Beta
[code]....
best way to automate the data on Sheet2? The items can be assigned in any order, it just needs to match the count on Sheet1.
View 4 Replies
View Related
Jan 8, 2013
I'm trying to use a macro that will copy & paste values from one workbook to another. Everything works fine until I try to get it to Paste to next available row.
It worked the first time, but after that it jumps, several hundred rows at a time.
This is what I have so far:
Code:
Sub CopyData()
Workbooks.Open Filename:="S:Production OfficeMonthly KPI Reports.xlsm", ReadOnly:=False
Windows("Weekly KPI Plan.xlsm").Activate
Worksheets("Data Input").Select
Worksheets("Data Input").[A4:AT650].Select
[Code]....
View 3 Replies
View Related
Jun 28, 2009
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies
View Related
Nov 9, 2012
Not sure if it's me or a new change in excel 2010, yet creating a simple macro as listed below does not work.
Outside of macro I will select a range of data and copy.
Then, using macro I'd like i to perform: paste special values, in the current cell
View 5 Replies
View Related
Aug 7, 2007
I need a macro that will take the values that are in the far right cells and move them to an area on the left. the columns they will be pulling from are the IU & IV column starting with row 2 down to row 460. from there I need the values to be pasted into the D & E Columns starting at row 6. The two columns IU & IV are a date and a task for that date. When they are pasted into the columns D&E they will need to be sorted by dates (or just all of the blanks removed), with the soonest occurrence at the top. The reason for pasting values is because I have formulas pulling the tasks and dates off of another sheet. The last thing is that the macro needs to be triggered by the information in cell c2, when that cell is changed the formulas go to work and everything in cells IU & IV update. That is when I would like the macro to kick in and work the miracle.
I have been trying to build a colony of formulas that could do it, but I have given up, then I tried to make an array index it for me, but that wasn't working for me either.
View 9 Replies
View Related
Jan 15, 2008
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
View 9 Replies
View Related
Jun 10, 2006
I have a macro that pastes formulas as values on specific pages (("CTY EME", "Int Center", " Total SW dist cost", "Int, pubs & oth", "Total". Is there a way to compress the macro ie with the sheet names?
Sheets("CTY EME").Select
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
View 3 Replies
View Related
Feb 23, 2008
I often need to use Paste Special... Values, using Excel 2003. So I recorded a Macro into "Personal.xls" and assigned a shortcut key combination "CTRL-Shift-V" so that it would always be available. I first select one or more cells and hit CTRL-C to copy to clipboard, click on another cell, then hit CTRL-Shift-V to run the following macro: Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
It often works . . . and it often fails. When it is working it seems to keep working over and over. When it is failing it keeps failing. So it is almost as if there are two "modes" of operation, which for lack of terms, for this post I will coin the terms "fail mode" and "fixed mode". Once I am in one of the two modes, it stays there for a while. When it is in the "fail mode", I always get the dreaded: Run-time error 1004: "Pastespecial method of Range class failed".
Since this problem is very intermittent, I believe this is why there are so many posts in the Internet about this, and so many people are replying back "it works fine for me". I have seen many solutions offered but none work so far for just a simple shortcut key to do a PasteSpecial :Values. Some solutions "work" . . . such as adding the PasteSpecial button to the Toolbar, or pressing ALT-E-S-V <Enter> - but both of these bring up the Paste Special dialog box which I want to avoid. I spent days trying the many solutions offered but so far all I have found is a trick to convert Excel from "fail mode" to "fixed mode". The trick is to add a line to the macro to first do a "Paste Special: Format:
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
...................................
View 8 Replies
View Related
Jan 6, 2014
In Sheet1, column Y looks into Sheet2 and returns the status of that specific order - the result displayed in column Y will be either blank or a variety of text strings (eg. received, pending etc).
I need to make a macro that looks into all the cells of column Y in Sheet 1 and copy/pastes as value into that same cell only if the formula in that cell returns text string "Received". It should not affect the other cells where the formula is returning either blank or a different text string.
View 1 Replies
View Related
Sep 18, 2009
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
View 14 Replies
View Related
Feb 17, 2014
I got a macro to copy and paste values onto another tab within my worksheet. I have a lot of data and currently takes about 30 seconds to calculate and paste. Not sure if its an issue with my macro or with my computer (Mac - Excel 2011).
Here is an example of my macro:
Sub SimulateWeek()
If Range("AdvanceWeek").Value = "Week 1" Then
Range("Week1B").Copy
Sheets("Schedule - Results").Range("C2").PasteSpecial Paste:=xlPasteValues
[Code]....
(this continues on until 'ElseIf Range("AdvanceWeek").Value = "Week 31"....etc). So you can see I have the same code repeated 31 times.
View 2 Replies
View Related
Feb 23, 2008
I often need to use Paste Special . .. Values, using Excel 2003. So I recorded a Macro into "Personal.xls" and assigned a shortcut key combination "CTRL-Shift-V" so that it would always be available. I first select one or more cells and hit CTRL-C to copy to clipboard, click on another cell, then hit CTRL-Shift-V to run the following macro:
VB : Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
It often works . . . and it often fails. When it is working it seems to keep working over and over. When it is failing it keeps failing. So it is almost as if there are two "modes" of operation, which for lack of terms, for this post I will coin the terms "fail mode" and "fixed mode". Once I am in one of the two modes, it stays there for a while. When it is in the "fail mode", I always get the dreaded:
Run-time error 1004: "Pastespecial method of Range class failed".
Since this problem is very intermittent, I believe this is why there are so many posts in the Internet about this, and so many people are replying back "it works fine for me". I have seen many solutions offered but none work so far for just a simple shortcut key to do a PasteSpecial :Values. Some solutions "work" . . . such as adding the PasteSpecial button to the Toolbar, or pressing ALT-E-S-V <Enter> - but both of these bring up the Paste Special dialog box which I want to avoid.
I spent days trying the many solutions offered but so far all I have found is a trick to convert Excel from "fail mode" to "fixed mode". The trick is to add a line to the macro to first do a "Paste Special: Format:
VB:
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Then select and copy any cell/s, click on another cell, and run the macro just ONCE - it will paste the formatted value successfully and you are now in the "fixed mode". Now you can remove the PasteSpecial:Format line that you just added, to get back to the original macro with just the "Paste Special: Values" line:
VB : Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Now Excel is in the "fixed mode" and the original macro will once again start working properly. BUT only for a while !! Then some time later, usually within a day or a couple hours . . . Excel goes back into that "mode" where once again the macro fails repeatedly. I have been unable to isolate what causes the mode to return to failure.
Any simple way to either change the code so that it ALWAYS is successful, why this often is not successful ? I believe that the fact that adding in the Paste Special : Format code and running it just once to fix the problem, also could be a clue as to what causes this problem to "sometimes" occur.
View 9 Replies
View Related
Feb 16, 2010
I have a folder containing 40 single sheet excel workbooks and I would like to automate following tasks:
- Open each excel file (need to open the file so as to update it since it gets the data from another workbook through =formulas)
- Copy paste as values
- Save this as excel html in the same folder as original excel files (keeping the original file name)
- Close (original excel file should not be changed ie formulas should remain in place, only the html file will contain values)
- Since there will always be xHtml files with same name need the macro to replace the excisting file
My abilities with excel are limited to functions, no VBA knowledge other than finding ready codes and pasting them in the module.
Since this routine is to be run almost daily the macro should run all files, instead of one by one.
I just hope that I am not asking too much for excel to handle and I hope that explanation is clear.
View 9 Replies
View Related
Nov 24, 2012
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
View 1 Replies
View Related
Jun 4, 2009
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
View 14 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Jun 10, 2013
I was thinking of how the Worksheet_Change(ByVal Target As Range) macro can be used to paste values instead of formula when the user uses Ctrl-C and Ctrl-V. Instead of assigning a macro to a command button for user to activate.
Suppose I have a worksheet where the range ("D7:D56") is where I would want the user to paste his values in it.
I have to factor in the possibility that these values have formulas attached to them, and that the user is not tech-savvy enough to know about the "paste special --> values" functionality of excel, and chooses to use the Ctrl-C, Ctrl-V method instead.
What then appears are ####### which might alarm the user.
Neither would we want the user to press a button (which we can assign the xlpastevalues macro as an alternative) as that adds an extra step for the user. There is also a chance the user might not use the button, or overlooked it.
Is it possible to use the Worksheet_Change(ByVal Target As Range) macro, or sth similar, to paste values instead of formula when user uses Ctrl-C and Ctrl-V?
View 6 Replies
View Related
Mar 17, 2007
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Oct 26, 2007
I have a macro that does lots of cutting and pasting, and to make sure it can run without interference from my normal work, I did add the line Application.Interactive = False. But seems while I am cutting and pasting in other windows while the macro runs, sometimes it crashes on the paste part. Is the macro and the Windows Operating system sharing the clipboard?
FYI, Windows XP professional, Excel2000.
View 9 Replies
View Related