Create a smart macro which will remove all references to the #REF! which is left when rows are deleted. It would have to remove all trace of it from any equation it may be in (i.e. if it was in an averaging equation, it would need to remove the preceeding comma as well:
=average(a1,a2,!#REF!,a4 .........)
I can't get rid of the alert "Delete entire sheet row" using DisplayAlerts = False. Here is my code:
[Code] .....
I have a Macro which deletes a sheet called "Pre selection" with:
Sheets("Pre selection").Select
ActiveWindow.SelectedSheets.Delete
It asks me every time if I am sure and I have to click to continue. Is there any way to remove this prompt or set it to continue without my intervention?
I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
I got a code to delete all rows in the sheet which contain the word "DETAILS" but I now want to delete all the rows that do not contain the word "DETAILS"
My code if needed is:
Sub Find_details()
Dim rng As Range
Dim what As String
what = "DETAILS"
Do
Set rng = ActiveSheet.UsedRange.Find(what)
If rng Is Nothing Then
Exit Do
Else
Rows(rng.Row).Delete
End If
Loop
End Sub
I want to delete every second row, because I have data with 0.25m interval and I want 0.5m interval. Why I try the following it doesn't work?
View 2 Replies View RelatedI'm looking for a macro that will delete a row with a certain value (0.00) and the row below it.
View 9 Replies View RelatedI am looking to find and delete email addresses in this case *@aol.com. I have only one column which is full of email addresses, I just want to delete all of the @aol.com ones in this case. This is the macro I am trying to use, but it does not work.
For Each cell In Range(Range("a2"), Range("a65536").End(xlUp))
If cell = "*@aol" Then
Range(cell, Cells(1, Rows.Count)).EntireRow.Delete
Exit For
End If
Next cell
I want to write a macro that would delete the rows if the sum equal to zero and the description is identical. For example:
Column a: Column b:
100 Apple
200. Apple
300. Grape
-100. Apple
-200. Apple
400. Cherry
-400. Cherry
The answer should be 300 grape.
I am looking for code to put in a macro that will go through a tab of data and delete the rows that have merged cells in them. The number of rows that there will be will never be a constant because the people using it will be pasted in information from another source, deleting the lines that have merged cells then run a macro with stuff that needs to be done to the info, but I would like to save them the step of delete the rows that have cells.I think it is Office 2013 I am using. I am not at that machine right now so I can't check.
View 4 Replies View RelatedI am able create a macro using the find function to find the next blank row, but I would like to have it select a range of rows down that I can then delete. Each time I run the macro the next blank row may be different thant the last, so it can't be a set number of row numbers each time. I could also possibly use the print area function if it would be easier.
Here is what I have so far, what is in red is where I need it to vary from next active blank row down to R2001C14, and then delete all the active blank rows ...
I have a excel file with more than 10 sheets and every sheet has a title on its first three rows.
I want to delete first three rows in all sheets except parent sheet .
Is there a way for a macro to be not active when trying to insert a row or a way to have the macro understand that it's just a row shift? I'm trying to have a time stamp that anyone changes the value in a column. The following code generates an error 1004: application or object defined error when I insert or delete a row.
View 14 Replies View RelatedMy excel contains first 5 rows of heading information and the rest of the rows contain the data. I want to select a specific row from the data and run a macro that would delete all other data containing rows.
This is what I have now:
Code:
Sub DelRows()
Rows(6 & ":" & ActiveCell.Row - 1).Delete
Rows(7 & ":" & 65000).Delete
End Sub
Everything is fine if I select any data row except the first one (R6). In that case, the macro doesn't work as it should, deleting a row from the heading ones.
I have data from Columns A to D. I want to do the
following:
1. Look for duplicates in all column A
2. For each duplicate found in column A, check if all values in column B are also duplicate.
3. If the condition in (2) is satisfied, compare column D for all the rows; select the row with the minimum value in column D, and delete the other rows.
For example:
A B C D
Row1: Abby 04/01/2014 7:00PM 0.98437
Row2: Sam 04/01/2014 9:00PM 0.35627
Row3: Abby 04/04/2014 7:00PM 0.68932[code]....
I'm working through a filter macro to delete unecessary rows of data from my dataset.
- I have a Dynamic Range for my dataset called "CanadaData"
- I'm trying to delete rows from the 5th column of my dataset for cells containing "DIRECTSHIP"
The macro filters the range fine, but when if comes to deleting the row, the macro stops.
Sub CanadaWarehouseFilter()
x = Range("E" & Rows.Count).End(xlUp).Row
If Application.WorksheetFunction.CountIf(Range("E22:E" & x), "DIRECTSHIP") > 0 Then
With Range("CanadaData")
[Code] ......
I currently have the following Macro for one of my many checkboxes in 2007 Excel:
[Code] .....
It works perfectly until additional rows are added/deleted before the indicated rows in the code (It changes the number sequence in the workbook). The number sequence stays the same in the code which means I am now hiding rows either before (delete rows) or after (insert rows) the intended rows I want to be hidden. Is there a way to change the above code to remain with the assigned rows regardless of the adding/deleting of rows before it?
I am working on a sales sheet for my business. I have a worksheet that has the names of everyone in my store that has sold anything in column A. I want to create a list that has just my full time sales people and will delete everyone else.
View 9 Replies View RelatedI am looking for a macro that will remove any rows exceeding 12 months. Each month new data is added in and I am looking to remove anything over 12 months with the new month is added.
View 6 Replies View RelatedI've got these command lines I'm using to delete some specific files.
However when running the code, I get some message boxes popping up to ask if I want to save the file.
I have a macro that looks at a list of students and the school they attend, and then creates an individual worksheet for each school containing only their students. I want to hide Column B on each of those worksheets. This seems like it should be easy, but it is not working.
When I leave it as is pasted below, Column B does not get hidden.
When I change it to Sheets(school.Value).Columns("B").Select I get an error message stating "Select method of Range class failed."
Sub ExtractSchools()
Dim wsTransfer As Worksheet 'worksheet with transferred data from registrations wrkbk
Dim wsList As Worksheet 'worksheet with list of students
Dim wsNew As Worksheet 'worksheet being added for a school
Dim wSheet As Worksheet 'name to loop through all worksheets
Dim rng As Range
Dim school As Range
Dim rowNum As Integer
Set wsTransfer = Sheets("Transfer")
Set wsList = Sheets("Student List")
wsTransfer.Select
Range("Database_Transfer").AdvancedFilter xlFilterCopy, Range("Criteria"), _
wsList.Range("Database_Unique").........................................
when I run a macro, it takes me to a different sheet, clicks on a cell, and then goes to data--> form to automatically generate a form so I can make a new entry. I want the macro to wait until I have completed the form, and on completion to do something else. I'd prefer it if I could indicate completion of the firm by just a keystroke, but a mouse click will do as well.
View 2 Replies View RelatedThe question is pretty much described in the post title. Here is the situation:
I have a workbook that has data plugged into it manually throughout many sheets, and at the end there are a few sheets with different graphs and charts that are generated by a macro. This macros works perfectly - all the data is accurate and the figures are perfect when compared with a manual count. The problem I have is that the cells where the macro puts the summed values are in a chart that is supposed to create a bar graph. Normally, if I change a value that a bar graph uses I see the bar graph change - but that does not happen with the cells that have values placed in them by the macro. I also have a section that sums the values in the chart to make sure it's running right, and these values do not update automatically as well. The cells have the formula =SUM(B3:B12) and so on, in them. Right now, every time that I run the macro I need to go into the cell with the formula, hit 'enter', and then it does the summation. Is there a way to correct this problem, or is this something that is part of excel?
I have a macro that copies rows from my DAILY OCCURENCE sheet that have a YES in them to my MANAGER SUMMARY SHEET and G1 is selected which has a hyperlink that opens a new email with the manager's email address and Subject pre-assigned.
I then have to manually go back to the newly generated summary sheet and select the cells and paste them into the email that was just opened.
Is there a way that the generated rows are already copied in memory and all i have to do is CTRL+V into the new email, or even better, the cells are pasted in the email automatically? So basically either the information being copied over stays in memory, or after it is copied into the summary sheet it is copied again. I just dont know how to copy unpredictable ranges generated by macros.
The code that generates my summary sheet for my manager is below.
[Code] ...........
if you can remove the word total from each cell without deleting the numbers after you copy from a subtotal list?
View 9 Replies View RelatedHow do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedThe first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True
Next cell
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete
Next cell
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
Say I have a method that iterates through a bunch of Sheets. I check the name of every sheet, if it starts with "Data", I need to make everything between A4 and AZ500 empty (either by clearing cells or deleting rows doesn't matter how, as long as the result is an empty sheet below A4).
View 2 Replies View RelatedI have an excel spreadsheet that contains about 1000 rows and about 25 columns. The file contains employee information, name, id, cost center, department, title, FTE...etc. Column E contains the cost center which is a 7 digit number (i.e. 8001234). Within the 1000 rows of data there somewhere to 70 cost centers. I would like to delete all rows where a cost center does not match a list of 13 cost centers. I'm thinking I need some kind of array where I type in the 13 cost centers in the code, but I'm unsure of the syntax within VBA.
Also, the second step of the code I'm looking for is to delete all columns except for Column B, E, J and L. Those, by the way are Name, Cost Center, Job Title and FTE.