copying all Rows(including blanks) between 2 identical rows
for example
ID
Notes
4554
asdf
--
asf
[code]....
Copy from 2nd row to 7th row (I.E 4554 - 4554) 4554 is on sheet 2 with other rep ID's - Loop with other ID's would be great
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
The below code compares the Data in a Field that must be set and collect the duplicate Values in a second Worksheet.
The thing I want it to copy the rows, when a duplicate is found in Col A. editing the code below:
Original Sheet:
"A" "B" "C" "D"
Teil1A11000
Teil1B21001
[Code]....
So I am trying to mark certain rows as duplicates if their values in Columns J, AD and ABS(BD) match. J and AD contain Number letter Identification combinations and BD contains a value. I currently have a formula as shows that will mark all of these values:
[Formula]
=IF(AND(COUNTIFS(J:J,J15,BD:BD,ABS(BD15),AD:AD,AD15)>1, (SUMIFS(BD:BD,J:J,J15,AD:AD,AD15,BD:BD,ABS(BD15)))<>ABS(BD15)),"Duplicate","")
[Formula]
The issue with this formula is that I do not want it to mark rows that look like this:
J - AD - BD
AA1 BB2 20
AA1 BB2 -20
AA1 BB2 20
I have a lot of rows that will appear like this. Their sum in BD equals the absolute value of the value in BD. I thought this would get picked up using the SUMIFS portion of my formula but it is not. I cannot find the problem.
I have a spreadsheet with three colums of data. The first column contains
records which have occasional phone number duplication- see blelow:
(555) 000-0000DataA1ValueA1
(555) 000-0000DataA2ValueA2
(555) 555-9770DataA3ValueA3
(555) 555-4464DataA4ValueA4
(555) 555-4464DataA5ValueA5
(555) 555-4720DataA6ValueA6
(555) 555-8823DataA7ValueA7
(555) 555-3834DataA8ValueA8
(555) 555-4125DataA9ValueA9
What I need to do is (somehwhat) automate the process of filtering or
deleting out all rows which have duplicate data in the first column, but not
second or third columns. I'm sure it's been done...I tried the Excel
out-of-the-box.
I have this code picked up from a friendly website:
Public Sub Extraction_to_new_sheets()
Dim My_Range As Range
Dim My_Cell As Variant
Dim sh_Original As Worksheet
Application.DisplayAlerts = False
Application.Calculation = xlCalculationManual
Application.ScreenUpdating = False
Set sh_Original = ActiveSheet
how to highlight in one rows and 3 column if there is a duplicate.. i have attached here as an example....NameMatch.xlsx
View 4 Replies View RelatedI have a sheet whereby in column A i have company names and column B how much is invested in this company so:
A B
AAPL 10
GOOG 5
MSFT 15
APPL 5
IBM 20
GOOG 10
What i would like to do via macro is take all the duplicates sum them so that i see AAPL as 15 but only be left with one row. So we would be left with only 4 rows each with their summed weight.
In Column "C" there is a list of numbers ( these number realte to incidentsm and are called incident IDs) and I want to delete the rows that have duplicate incident IDs.
the row of numbers looks like this ....
I have a number of rows that I want to have duplicated X number of times (and altered) where X is found by looking at certain cells within each row.
There are four numbers in each row, and I want to split them up into multiple rows each with three zeros and one one.
I would like to convert data from this:
Name W X Y Z
John 1 0 0 0
Doug 0 0 1 0
Karl 3 0 1 0
Mike 0 1 1 2
etc.
...to this:
Name W X Y Z
John 1 0 0 0
Doug 0 0 1 0
Karl 1 0 0 0
Karl 1 0 0 0
Karl 1 0 0 0
Karl 0 0 1 0
Mike 0 1 0 0
Mike 0 0 1 0
Mike 0 0 0 1
Mike 0 0 0 1
etc.
You can see that the W, X, Y, and Z columns from the four new Mike rows sum to equal the values in the original Mike row (0, 1, 1, 2), but everything has been split so that each row just has a single one in it and three zeros.
Does anyone have an idea of how to do this? Thanks Auto Merged Post Until 24 Hrs Passes;I thought of another way of putting it that may be easier to understand.
Given an input row of "George, 4, 7, 3, 2", I would like the output to contain 4 rows of "George, 1, 0, 0, 0", 7 rows of "George, 0, 1, 0, 0", 3 rows of "George, 0, 0, 1, 0", and 2 rows of "George, 0, 0, 0, 1".
I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.
View 3 Replies View RelatedI have a worksheet that is composed a header row, and columns of data (client call results).
Each client is identified by a unique ID number in column A, a seperate column F has the 'call number, from 1 to x'.
So a client can have a single or multiple rows of data. Each client group of rows is sequenced with call 1 as line 1, call 2 at line 2, etc. etc. as your proceed down the rows.
The entire worksheet is already sorted (with a header row) ascending by client id and call #
What I want to accomplish is this
1 - copy the existing worksheet (CallRecords) to a new worksheet (CallToday)
2 - in the new worksheet, scan down (or up) from first data row (2) to the last row {ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row} and delete duplicate rows of the Client ID retaining the row with the max call number for that client id.
3 - sort the new worksheet (CallToday) ascending by column (G) date, and column (H) time.
I have a sheet with 45,000 rows. Let's say each row has 4 columns: Create_timestamp, Update_timestamp, email_address, and o_flag
Many rows have duplicate email addresses. I would like to remove all the duplicate rows, EXCEPT for the row with the most recent Update_timestamp.
And actually, if I could just "hide" all those rows, that would be even better, but I'd be happy just figuring out how to delete all the "old" rows, so I just have a list of unique email addresses, with their create/update timestamps and o_flag column. Seems like this is such a basic use case for "Remove Duplicates,",.
I am trying to determine if the value in cell Y2 also exists anywhere in cells AE2:QE2.
My initial stab at it is
[Code] .....
This results in a #VALUE! error (I am pretty sure that's because excel doesn't like the AE2:QE2 part).
I would do a formula-driven conditional format for this, but I have 2000+ rows that need to be acted on, so that's not feasible.
Is there any way to have excel check if the Y2 value exists in AE2...QE2, cell by cell?
I am trying to do a SUMIFS from a chart with duplicate values in rows and columns.
Data looks like this:
So this is basically sales of different products (columns) on different routes (Rows).
I want to add up a total for all the same kind of products eg. Magnum for each route eg. Local Top End.
I am using the following code to copy a unique list, but it gives a duplicate in the first 2 rows(col Q). There is no headings in the columns.
Code:
Sub CopyUnique()
Dim lastrow As Long
lastrow = ActiveSheet.Cells(Rows.Count, "P").End(xlUp).row
ActiveSheet.Range("P11:P" & lastrow).AdvancedFilter Action:=xlFilterCopy, _
CopyToRange:=ActiveSheet.Range("Q11"), Unique:=True
End Sub
I have following code (see below) which finds the duplicates within columns, but I require copying and replacing duplicate values within different row cells, as I am currently finding this task hard to implement.
Input Data example:
Name
Short_code
Lng_code
[Code]....
I have a data set which has 6 columns (and lots of rows). Every row is different but I want to aggregate them based on 4 fields and then find the average of the numerical column for the results. I basically want to Group based on 4 fields and find the average of the 5th field.
My initial approach was to introduce a column which is a combination of the 4 fields I want to group by, simply in the Excel file (=A2&B2&C2&D2) and then find duplicates of that. I have a solution for this in VBA but when importing new data sets in this method is very slow, so I want to be able to do the whole thing in VBA.
I have a spreadsheet that lists employees and their certifications. If an employee has multiple, then they will show up on as many rows as they have certifications.
The macro I have merges them into one row with a line break, but only the first column's unique value has been merged while the other columns containing their own unique values are duplicated when I want them to show up only once. Example: Jane Doe shows up 2 times on the report. Her name should only show up once on the row, not 2 times with a line break.
Here is the code. I have also attached an example of what I need. Because the attachment is a simpler version of the actual report, is it possible to specify which rows have the unique values and which ones don't?
I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:
If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.
I'm new to VBA and macros, using Excel 2010, and am trying to figure out how to delete all duplicate rows in a sheet where 2 or less of their values in column A is "1". I'd like have a script that is flexible enough to change to 3 or less if need be. I also have a header row that needs to be offset in the process.
A---B-
0--123 <-delete
0--123 <-delete
0--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
or
A---B-
0--123 <-delete
0--123 <-delete
1--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I have a worksheet that has 3 duplicate values in a particular column, I need a macros that will highlight two of the duplicates row and then another macro to delete the entire row. The duplicate element are in column R. find attached worksheet.
Copy of OCL 2010 (3).xlsx
I am using the following macro to insert the word "Duplicate" in the first blank column next to a duplicate row. My data is sorted by the first column. Data Example:
12345 a
12345 a DUPLICATE
11111 b
23123 b
Here is the macro I am using and it does not work. It marks the first duplicate it finds then goes into an infinite loop. Any Idea where I went wrong?
Sub MarkDupes()
x = ActiveCell.Row
y = x + 1
Do While Cells(x, 1).Value <> ""
Do While Cells(y, 1).Value <> ""
If (Cells(x, 1).Value = Cells(y, 1).Value) Then
Cells(y, 3).Formula = "Duplicate"
Else
y = y + 1
End If
Loop
x = x + 1
y = x + 1
Loop
End Sub
I have a workbook with data in columns A:HN.
What I'm trying to do is copy any rows where the range O:HN contains a 3, 4, 5, 6 or 7 to a new sheet.
I have been using the following code:
[Code] ....
And running it 5 times (with 3 as string, then 4, then 5 etc...)
However, I'm getting duplicates. I imagine where rows contain for example a 5 and 6? Is there a more accurate way to do this?
I've tried to write a VBA code that copies a value down and deletes empty rows. The macro needs to copy down the value in column A from the above row if the current column is empty but delete a row if column B is empty. The following code will copy down the value but will trigger a 400 error and won't delete any rows. The desired effect is to have column A completely filled and the empty row (Row 5) and the row containing "Page 1" (Row 6) deleted.
Code:
Public Sub fillType()
Dim LastRow As Integer
Dim Count As Long
LastRow = ActiveSheet.UsedRange.Rows.Count
For Count = 0 To LastRow - 1
'If A column is empty, copy value from column above
[code].....
I have 21 (20 data sheets + 1 result sheet) excel worksheets. A5:E5 is the starting row of values. I want to copy down all the possible rows with values until the row is blank (.xlDown) and paste in Sheet21, A2 onwards.
The problem is each of these 20 sheets have different number of rows of values (say 1 has 10 rows, 2 has 23 rows etc.,). I want to copy A5:E15 in Sheet1 and paste in A2:E11 in Sheet21 and copy A5:E28 in Sheet2 and paste in A12:E35 in Sheet21 and so on.
Sheets("Sheet1","Sheet2" .......)
Range("A5:E5").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("Sheet21").Select
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
