pulling out data in a column, lets say column K, that is between a 12 and 20. There are quite a few lines so I would like to be able to pull them out automatically. In addition, I would like for the macro to pull the entire row of data not just the specific cell value.
View 3 Replies
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View RelatedI'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedI have a report generated from an application and am looking to format it into a specific format in order to import it into access to be used in a query. Does anyone know how to write a macro which will:-
1. look for a particular word and delete 1 row above it and 16 rows below it, for every time that word appears on the sheet.
2. Look for a specific number (which can be identified by the total number of digits in it and/or the starting series of numbers) from it’s location to another newly inserted column
4.Finally, count the number of rows between the number moved in step 2 and the next similar number and copy the first number in to number of rows = the number of rows between it and the next similar number.
I have a macro which makes two new WS (AU - UA and AU - LH), copies header row to both of them and then copy three letter airport codes which are in column A with appropriate prices to these new sheets. I need to modify code so if there will be in pricelist some new airport codes which are not in macro yet, that they would be copied to new WS (NEW CODES), so I will know which airports are new. I have attached example file, to make things clearer what kind of result I would like to get after running macro. Here is code of my macro:
Option Explicit
Sub UA_LH_OS_SK_VER_2()
'Turn off ScreenUpdating for faster runtime so screen won't flash while running
Application.ScreenUpdating = False
Dim CLL As Range, FaresWS As Worksheet
Set FaresWS = Sheets("FARES")
Worksheets.Add(After:=FaresWS).Name = "AU - LH"
Worksheets.Add(After:=FaresWS).Name = "AU - UA"
With FaresWS.Rows(1)
.Copy Sheets("AU - UA").Rows(1) ' Paste to worksheet AU - UA
.Copy Sheets("AU - LH").Rows(1) ' Paste to worksheet AU - LH
End With.....................
I need a macro that will copy a row from one worksheet to another worksheet if a certain condition is met. On sheet1 if column 'D' contains a "N" and column 'F' contains a "C" copy that row to the next available row on sheet2 starting with row 3 and then down from there. Also, I'm not even sure where to put the macro to keep the sheet updated. Would this go into sheet2's Worksheet_Activate? th
View 9 Replies View RelatedI require a row of details to be copied to another worksheet by typing in a unique ID using a macro so Sheet 1 is a data base of items (every item have a unique code like 1001, 1002 etc) and sheet 2 has a table, and next to the table is a cell, which i need to work like a search engine.
i need to be able to type the unique id in a cell, in sheet 2, then click an Add command Button. This button then finds the unique id in sheet 1, and copies all the items details in the same row, into sheet 2 in the table, then i require the search engine to be cleared for the next item to be added. (Assumed Experience:Below Average, I know few formulas and know very basic macros)
How do I determine if AutoFilter is turned on when I open a sheet? I tried FilterMode with no luck.
HTML Code:Â
Sub macro2()
Dim t As Boolean
s = ActiveWorkbook.Name
t = Worksheets("SO_PO_14").FilterMode
End Sub
The FilterMode call always return False,
Sheet1: 10 columns (can have any number of rows, let's say 5,000 rows)
Sheet2: 10 columns (can also have random number of rows, let's say 10,000)
Both sheets have the same data but the column headers may be slightly different due to the source being different systems
Here's what I need: I need a macro to copy the data (without the headers) from Sheet1 underneath the the last row of Sheet2. For example beginning on the 10,001 row of Sheet 2. OR, if it's easier to copy the data in both sheets to a new sheet. The new sheet will already have the headers so begin pasting on the second row
I am doing a financial statement for a person but I did not create the workbook. The book has two sheets linked together. I am overwriting the names and numbers from last year's form. I have run out of lines on the first sheet and don't know how to copy and paste the macro to the bottom of the sheet so that I can carry on with inputting my numbers. Here is a sample of the workbook.
View 4 Replies View RelatedHi all! I'm hoping someone can help me as I'm trying to complete this for work ASAP. Here's the story. I want to automatically fill out the Monthly Log sheet using the information provided on the "Full Staff" sheet. If E9:E227 in the Staff sheet is listed as "CO", I want to copy the corresponding cells over to the corresponding cells in the Monthly Log Sheet. Also, I want it to automatically paste the information in the next available row (say rows 1-15 are being utilized, I want it to post in 16). Can anyone help?
View 6 Replies View RelatedI want the column to be pasted on the first empty column in the other sheet. Additional information: I'm constructing an excel-file that has 4 worksheets. First sheet has all the workable data. Everything is ordened in columns. Column 1 has all the 'first information', column 2 all the 'second information'.
Second sheet has all the formulas. On this sheet I only have to select the data I want to use, for example the data of the 'first information'. On the third sheet will all the results be punt. All the results will be put in a single column again.
The fourth sheet needs to contain all the results, column by column.....
I'm trying to copy a worksheet from one workbook to another from within a macro.
I tried recording a macro while I did it, but Excel only records the first half within the source workbook:
Sheets("RAP").Select
Sheets("RAP").Copy
The Macro Recorder doesn't show the 2nd half in which I select the destination workbook and paste. And there is no paste method; I can't say
Sheets.paste
How do I paste the sheet into the destination workbook?
I need a macro to copy worksheet "OTP" from workbook " OTP Details" to another workbook "Todays OTP".
View 3 Replies View RelatedI am trying to copy data from one sheet to another using a macro. I want it to do the following.
SHEET 1 SHEET 2
Column A Column D Column A
Quantity Part # Row 7 B12
Row 14 2 B12 B12
1 B10 B10
3 B11 B11
1 B9 B11
Row 30 B11
B11
B9
Basically copy the part number from column D on sheet 1 to sheet 4 but copy it equal to the Quantity in Column A.
I made a macro to copy data from my data entry sheet to my database sheet:
Code:
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
Dim NextRow As Range
Set NextRow = Sheet4.Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
[Code] .......
The main to problems are that its not pasting in in the right collum and its not passing the next entry in the next free row.
Have attached a screenshot of the two sheets, at the sheet has some personal data, i won't be able to upload it.
I have been able to figure out how to copy a sheet in a workbook and make x amount of copies of it in said workbook.
Now...I have a list of names on a sheet named Roster. The list of names reside in column A2-A181.
I need to figure out how to make a new sheet with one name from the list in Roster and have the tab named after the person on the sheet.
The list is in alphabetical order and the sheets should remain as such.
In A2 of each *new sheet*, there should be a name from the Roster sheet, but never a duplicate name.
I am trying to write a macro to copy an entire sheet's content into cell A1 for each sheet in a workbook.
I am running into the problem of not being able to copy many cells into one.
Please assist me in figuring out a macro to copy a column or entire sheet to a single cell (preferably iterating through each worksheet in the workbook).
I have written Macro to copy every row in "sheet1" 24 times into new sheet called "NewSheet". but it keep giving me error message. Actually, I don't know why. Can any one please help.
here is my macro
Sub CopyRowsBook2()
Worksheets.Add().Name = "NewSheet"
Sheets("Sheet1").Select
' Find the last row of data
FinalRow = Cells(Rows.Count, 1).End(xlUp).Row
' Loop through each row
For x = 2 To FinalRow
Worksheets("sheet1").Cells(x, 1).Select
ActiveCell.EntireRow.Select
Selection.Copy
' Loop to copy every row 24 times
For i = 1 To 24
Sheets("NewSheet").Select
NextRow = Cells(Rows.Count, 1).End(xlUp).Row + 1
Cells(NextRow, 1).Select
ActiveSheet.Paste
Next i
Sheets("Sheet1").Select
Next x
End Sub
I dont now, but the code for copy info between sheets dont work
Sheets("SalGrpLibro"). Cells(1, 5).value = Sheets("Formato Permanentes").Cells(2, 2).value
and show error Range property. and this code is ok but is so many lines
Sheets("SalGrpLibro").Select
Cells(1, 5).Select
Selection.Copy
Sheets("Formato Permanentes").Select
Cells(2, 2).Select
selection.pastespecial
I have a worksheet that will have tabs added as time goes by and a macro within the workbook currently selects all of the sheets and copies and pastes formulas within all of the sheets simultaneously. Right now, if a tab is added, the macro needs to be updated to select that specific tab name as well.
I would like to simply have the macro select all of the sheets starting with "IL" until the sheet before "reference", or all sheets except the first 3 and the last 2 if that is easier. Any ideas? And thank you for your help, you people really amaze me sometimes!
I'm attempting another macro to copy the next years budgeted expenses from the LT Tracking tab to the Expense Tracking tab.
The result must be in the formula " ='LT Expenses'!D9 "
I have entered the following, however there is a syntax error on the last line: Sheet6.Cells(9, lcol).Resize(UBound(x, 1)) = x
Option Explicit
VB:
Private Sub Rectangle2_Click()
' NewExpenses Macro
' Transfers LT expenses to Expenses tracking sheet
[Code].....
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
I need a macro that would sort out the true value in column A, and paste it to another sheet (range A77)
View 10 Replies View RelatedI have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
I'm looking for some guidance on a particular popup box that I am getting when I try to run the code below.
View 2 Replies View Related
