Macro To Check For True Value And Copy To Another SheetOct 28, 2008
I need a macro that would sort out the true value in column A, and paste it to another sheet (range A77)
I need a macro that would sort out the true value in column A, and paste it to another sheet (range A77)
I am trying to allow the Command Button when clicked to go through multiple conditions before making a decision. So, when someone clicks on Command Button 3 the code should look to see if CheckBox1 is true, then it should check today's date, and if it is between a range of days, or even months, then it would add the number in TextBox1 with the amount already in cell H18. This event will happen every time someone clicks on the Command Button.
The end result is to have several sheets (4 total) for each quarter in the fiscal year, and if the dates are within those parameters, the clicking of the command button will update the correct sheet.
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
data table ( Sheet 1)
SLEMP IDDOJ DEPT
I need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.View 10 Replies View Related
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
I have a command button that copies a template worksheet and names it with a date that the user chooses. Problem is, the user can choose the same date more than once. So, I need to have the command button check for all the sheet names, and if it finds a duplicate, prompt the user to enter some text to concatenate to the original sheet name, therefore making it's name unique. My existing code is as follows:
Private Sub CommandButton1_Click()
MsgBox "Please be patient. Creating a new Week Ending sheet can take several minutes!"
Is it possible to have excel continually check if a columns used row count in a particular column is greater than a number before moving on to the next part of code?
The reason I'm doing this is because one formula will pull in data from bloomberg which can take some time (5 seconds or so).
Some other code that places formulas into other adjacent columns depends on the number of rows in the first column. So the code following the data pull wil fail if the above hasn't finished pulling yet.
I was thinking about doing something like a do nothing until true?
Here's what I have that is not working:
Do Until Range("A1:A6").Cells.SpecialCells(xlCellTypeConstants).Count > 5 Range("F1").Select
I expect that the number of used rows in column A should be greater than 5 once data is pulled. In this case I just had VBA select F1 until the count was greater than 5 before moving on. but I think it's interfering with the pull and will coninue to loop..
I'm trying to assist is working with sensitive data, and for security reasons I am unable to post the Excel sheet here. Here goes:
The user is working with a sheet in which uses checkboxes, and wants to assign values from cells in the same row as the checkbox to corresponding cells in the sheet (not a different book) if the box is checked.
I guess I should just ask what the best way to accomplish this is? I was thinking I need to do an IF test (do checkboxes return TRUE/FALSE?) and then assign values from the cells I need to corresponding cells in the next sheet. The big question for me using this method: how can I use a single IF statement to assign multiple cell values?
I have several rows with numbers that is either 0, a balance or a text like n/a. I need a formula that return true if all are 0 or contain n/a. If there is one balance shall it be false. Any suggestion? See example:View 6 Replies View Related
I have a 90 optionbuttons on a sheet in groups of three. I need to check to see if one of the option button value in each group is true.View 9 Replies View Related
This is my basic setup, each piece of equipment will have more than one routine to be performed:
To Be Performed
Next Due Date
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
I am looking for a formula to return either True/False in Column J if the font color in Column H is Red.
Is there a formula that can do this?
I have a function that works well for checking if a specified file exist within a specified path. I realized I do not know how to just check if the folder exist!
Example: I want to see if the following folder exist with boolean response...
What I have is a table of employees names, which site they work at and a comment.
I have a table on another sheet with the addresses of all our sites.
What I need is a macro which will:
>look at the active selection
>copy their name(sheet 1, row B) & comment (sheet 1, row G)
>look up the site they work at (sheet 1, row D)
>copy the relevant address (sheet 3)
>paste the name and addresses into different sheet
>paste the comments into another sheet
This will be used to make printable labels for letters that we post out to employees. They will need to be split up so each name and address is printed on a different label.
The comments will be printed onto letters which will have a headers which is the same for everyone, but would be nice if they could be personalised with the comments of their managers and perhaps their names (something like "Hi John, you have been selected by your manager for your great work, please find enclosed your badge. Jeff's comments: "Comment 1""). But this part is a nice extra, the important part is the address labels.
I have a macro that will not complete, and I can not figure out why. The macro is CHECK_for_Sheets_THEN_Copy_DATA:View 3 Replies View Related
I am using the macro below to import every spreadsheet into a folder. I would like to modify it to check the sheets it is importing for sheet protection. If the sheet protection is turned on, I would like it to turn it off. The password for the sheet protection will be "PIR".View 3 Replies View Related
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following codeView 11 Replies View Related
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
ActiveSheet.Name = Range("O4").Value
I though I could do this with a nested IF statement but it is too cunfusing for me. What I am trying to accomplish is this:
I want to have a screen pop-up asking me what my limit < would be for column "ESTCNT" so if I put in 25 or any other number that it would highlight all the rows that are less than 25, then look at the row above and below and if it matches the same number (that is in the cell "Range" of the highlighted column) in column "Range" then copy that row to a new sheet. Meaning all tha rows that match the "Range" would be in the same new sheet.
The rows might be different lengths and that there will not always be a number in cell "ESTCNT". Column headers will always be the same but might not be in the same column each time. And if it is not to hard once it is completed to find column "SPPLOT" in the new sheet created and asking what I want to autofil the column with.
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".View 9 Replies View Related
I have a report generated from an application and am looking to format it into a specific format in order to import it into access to be used in a query. Does anyone know how to write a macro which will:-
1. look for a particular word and delete 1 row above it and 16 rows below it, for every time that word appears on the sheet.
2. Look for a specific number (which can be identified by the total number of digits in it and/or the starting series of numbers) from itís location to another newly inserted column
4.Finally, count the number of rows between the number moved in step 2 and the next similar number and copy the first number in to number of rows = the number of rows between it and the next similar number.
Is there a way to copy a formula result as the actual value and not the formula,
I can do copy and paste using "value" option but would like an automated formula or code option if possible.
In the example, D4 copies C4, would like D4 to show "AB" and not the formula "=C4"
If you look at the attached spreadsheet you will see 6 tabs. Main, New Cust, Quote, etc.
"Main" will be the sheet that everything is inputted. If there is a "Y" under new customer, I want the entire row to copy to the tab "New Cust". If there is an "X" under quote, struct design, or graphic design I want it under its approp. tab. The Lisa tab should take certain Sales-Person and copy entire row on the Lisa tab. The certain Sales-Persons are BS, PK, PB, PD.
Buttons are fine. The "main" page will be getting updated daily w/ new info so after entering new data, i can press the button and it should copy the above to its locations.
I have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.View 2 Replies View Related
It brought up my own thread, I didn't realise it untill today, but the answer I been using uses conditional formating to highlight the lowest cells in each row. And as Sicarii pointed out earlier today you can't select a cell my color with conditional formating turned on. can I highlight some other way or can I select cells to copy some diffrent way. This is the VBA I use to select the lowest price.
Selection.FormatConditions.Add Type:=xlExpression, _
Selection.FormatConditions(1).Interior.ColorIndex = 6
And this is the code that Sicarii supplied and correctly warned me will not work with conditional formating.
Dim RngCol As Range
Dim lLoop As Long
Set RngCol = .Range("A1", .Cells(Rows.Count, 1).End(xlUp))
For lLoop = RngCol.Rows.Count To 1 Step -1
If Range("B" & lLoop).Interior.ColorIndex = 6 Then
Sheets("Sheet2").Range("B" & lLoop) = Sheets("Sheet1").Range("B" & lLoop)........................
I want to restate the tabs after using DisplayFullScreen = true
and setting the commandBars ("").Visible = false
I would be very thankful for your Help as I'm newie to VBA in Excel.
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I need to copy the data form Cell "C" to Cell "D" only if Cell "D" is empty
i have been using the following code but it will overwrite cell "D" regardless if data is present or not.
I have a series of checkboxes, we'll say checkbox 1-5. These are all listed on a sheet called products.
If for example you select check boxes 1,3 and 5 I need those to then be listed in a column in that order on another sheet called purchased.
If I went back and then uncheck 3 and check 4 then purchased would be updated.
I understand that if you take a cell and name it P1 for instance..and then on another sheet enter =p1 in a cell that they will update and share data, but I dont know how to pull from a check box..nor do I know how to assign a row of cells to accept multiple and changing information from those checkboxes.
I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.View 6 Replies View Related
I have 2 macros one hides a selection of rows and the other unhides them. What i want to be able to do is when an IF function is true then macro 1 (hide) is used. If the function is false then macro 2 (unhide) works. There is a code in VBAView 3 Replies View Related
I need a macro that will copy a row from one worksheet to another worksheet if a certain condition is met. On sheet1 if column 'D' contains a "N" and column 'F' contains a "C" copy that row to the next available row on sheet2 starting with row 3 and then down from there. Also, I'm not even sure where to put the macro to keep the sheet updated. Would this go into sheet2's Worksheet_Activate? thView 9 Replies View Related
Sheet1: 10 columns (can have any number of rows, let's say 5,000 rows)
Sheet2: 10 columns (can also have random number of rows, let's say 10,000)
Both sheets have the same data but the column headers may be slightly different due to the source being different systems
Here's what I need: I need a macro to copy the data (without the headers) from Sheet1 underneath the the last row of Sheet2. For example beginning on the 10,001 row of Sheet 2. OR, if it's easier to copy the data in both sheets to a new sheet. The new sheet will already have the headers so begin pasting on the second row
I am doing a financial statement for a person but I did not create the workbook. The book has two sheets linked together. I am overwriting the names and numbers from last year's form. I have run out of lines on the first sheet and don't know how to copy and paste the macro to the bottom of the sheet so that I can carry on with inputting my numbers. Here is a sample of the workbook.View 4 Replies View Related
Hi all! I'm hoping someone can help me as I'm trying to complete this for work ASAP. Here's the story. I want to automatically fill out the Monthly Log sheet using the information provided on the "Full Staff" sheet. If E9:E227 in the Staff sheet is listed as "CO", I want to copy the corresponding cells over to the corresponding cells in the Monthly Log Sheet. Also, I want it to automatically paste the information in the next available row (say rows 1-15 are being utilized, I want it to post in 16). Can anyone help?View 6 Replies View Related
I want the column to be pasted on the first empty column in the other sheet. Additional information: I'm constructing an excel-file that has 4 worksheets. First sheet has all the workable data. Everything is ordened in columns. Column 1 has all the 'first information', column 2 all the 'second information'.
Second sheet has all the formulas. On this sheet I only have to select the data I want to use, for example the data of the 'first information'. On the third sheet will all the results be punt. All the results will be put in a single column again.
The fourth sheet needs to contain all the results, column by column.....
I'm trying to copy a worksheet from one workbook to another from within a macro.
I tried recording a macro while I did it, but Excel only records the first half within the source workbook:
The Macro Recorder doesn't show the 2nd half in which I select the destination workbook and paste. And there is no paste method; I can't say
How do I paste the sheet into the destination workbook?