Macro To Copy And Paste A Moving Range

Mar 9, 2009

I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.

View 2 Replies


ADVERTISEMENT

Macro To Copy Rows Based On Moving Date And Paste Rows Into Identical Sheet

Jan 28, 2014

I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)

e.g. 28/1/2014
28/1/2014
28/1/2014

I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.

View 9 Replies View Related

Copy And Paste Macro To Run In Different Range?

Oct 15, 2012

I have a macro that allows me to copy the value of a dedicated cell (I4) and paste it at the start of a range (N4:S4) via a Form Button. When the cell (I4) value changes, I can run the Macro again and it will enter the new value in the next cell along in the range.

This works well across one row. What I would like to do is use this arrangement on more rows. The ranges would be directly underneath eachother.

Is there an easy way of doing it? Or will I have to write out a new Macro for every row?

View 9 Replies View Related

Copy Range Then Paste Special Macro

Aug 9, 2009

I created a macro that copies a range from one worksheet to another as shown below, which correctly copies everything including formulas.

View 9 Replies View Related

Macro To Copy Range And Paste It In A New Workbook

May 24, 2007

Is it possible to write vba code to copy the range A1:A20 from my workbook to a new workbook?

View 4 Replies View Related

Macro To Copy & Paste Variable Range

Aug 15, 2007

I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:

1. Ctrl-c in the current cell <copy the current cell>

2. DownArrow <move down one cell>

3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>

4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>

5. Ctrl-v <paste>

6. End-Down <move down to the last occupied cell>

I have set the record tool to record "relative" references.

Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...

Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub

View 8 Replies View Related

Macro To Paste In Certain Column, Moving Over Each Time

Mar 31, 2007

I have this macro listed below that finds all these files, copies cells from stat sheet and places them in sheet1 in another file. It keeps looping till all is found and done.

My problem is when it goes to paste in sheet 1 I want it to shift over a row each time.

Right now during the first pass it pastes in column B, I want it to start in column D

The issue seems to lie right under where it says "Put data into workbook"

Public Sub PullData()
Dim wkb As Workbook
Dim lngStore As Long
Dim strDate As String
Dim strName As String
Dim Book As String
Dim Sheet As String
Dim week As String
Dim Store As String

Dim IngRow As Long
Dim strCol(0 To 15) As String

strCol(0) = "b"
strCol(1) = "c"
strCol(2) = "d"
strCol(3) = "e"
strCol(4) = "f"
strCol(5) = "g"
strCol(6) = "h"
strCol(7) = "i"
strCol(8) = "j"
strCol(9) = "k"
strCol(10) = "l"
strCol(11) = "m"
strCol(12) = "n"
strCol(13) = "o"
strCol(14) = "p"

View 9 Replies View Related

Macro To Copy Range From Multiple Sheets And Paste In New Workbook?

Aug 3, 2012

I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.

Here is what I have so far

VB:
Sub Median_Database()
'This Macro takes the median from each station tab in the current Basin workbook
'And inserts it into the Median Database workbook

[Code]....

how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.

View 2 Replies View Related

Macro To Copy Range Hidden Paste In Specific Location

Mar 26, 2014

I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:

I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.

I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.

HTML Code: 

Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub

View 1 Replies View Related

Copy Moving Range From Multiple Closed Workbooks

Apr 28, 2008

I have the following code that works properly, Copy & Paste Same Range On Protected Sheet From Multiple Workbooks

Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook, book1R As Range
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
'Change path to suit...............

View 2 Replies View Related

Dynamic Range - Moving With A Macro

May 18, 2006

I am not sure if my problem is in the dynamic range or not. I have attached a small sample file. I tried to create a dynamic range by creating a named range of my "LabelRow" with the following as the refers to: =OFFSET($C$32,0,1,0, COUNTA($32:$32))

When I set my cursor on this, Excel makes an outline on the whole row 32 where there is data, which gives me some clue that it understands what I am trying to define. Next, I try to pick this range up and paste it using named ranges in a macro (CopyRange). It gives me an error like it doesn't understand the named range. I do similar macro code in many other places in this project and it works with non-dynamic ranges. Here are some other details on this project. I need a dynamic range because I insert new data into the dataset, which may be 2 quarters up to 20 quarters. This insert causes a regular range to be messed up. My ultimate goal is to graph selected rows of data with the same labels, but I need to have it starting at Q1, which is pushed to the right as new rows are added.

View 2 Replies View Related

Reference Moving Range In Macro

Sep 4, 2007

I want to search a word in my Data sheet and want to know what is the column position. Example: I have a word "LastName" as a Column header in my Datasheet whose column position can be anywhere in the datasheet based on the table selected. So i want to write a generic code which give me COLUMN position for this word in the datasheet.

So if "LASTNAME" header is coming as 7th column it return me 7
if "LASTNAME" header is coming as 9th column it return me 9.

View 5 Replies View Related

Excel Macro To Copy Data From Array And Paste To Separate Sheet Paste Special Transpose

Jan 29, 2014

I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.

The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?

View 1 Replies View Related

Create Macro That Can Copy / Paste Or Cut / Paste Rows Into Different Spreadsheet

Oct 1, 2012

I have one workbook that needs two macros.

On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".

This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.

I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.

If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.

.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.

View 2 Replies View Related

Sheet1 Row Range Copy To Sheet2 Firs Blank Row In Same Range Paste As Text?

Mar 16, 2013

Trying to assign code to comm. button on User form to copy lets say:

(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)

View 4 Replies View Related

Application.inputbox: Range To Copy And Paste The Range's Link And Format To A Different Sheet

Oct 7, 2009

Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:

View 2 Replies View Related

Copy And Paste From One Sheet To Another Based On Column A Using A Macro Copy Button

Jan 22, 2007

I want to copy and paste from one sheet to another based on column a using a macro copy button.

E.g. if column a value = apple then copy that row into the apple sheet.

View 9 Replies View Related

Copy/Paste Range(s) Without Activating/selecting Range(s)

Oct 2, 2008

To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.

View 5 Replies View Related

Copy Immediate Range, Paste To Another Sheet & Name Pasted Range

Feb 19, 2008

I have been struggling for a while to copy data from one worksheet to another and reset the target range.

The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.

For example, the below code generates an error: "Compile error: Argument not optional"

I have stuck the particular command button script below to let you see what I am trying to do:

Private Sub cmbFilter_Click()

Dim sCriteria As String

On Error Resume Next

View 4 Replies View Related

Copy/Paste Range To Different Size/Shape Range

Mar 3, 2008

I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?

2) Do not run that part of the macro if there is an error?

Thanks so much for reading this long-winded description but the error is a big problem

Private Sub CommandButton1_Click()

Import_Data_Form.Hide

Run "UnProtectAll"

Set b = Selection
ad = b.Address

' Local Variables
Dim wkbDataFile As Workbook

View 4 Replies View Related

Copy & Paste Macro Won't Paste

Jul 10, 2006

I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.

I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.

i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.

It falls over on the very last line of code I can see A5281 selected but it won't paste....

View 9 Replies View Related

Alternative To Copy Range Paste Range?

Feb 24, 2013

im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.

I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.

I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.

View 3 Replies View Related

Copy A Range And Paste It Over A Variable Range

Jul 16, 2009

I am using the code below to copy a range and paste it over a variable range.

View 4 Replies View Related

Copy And Paste Value Above In Range?

Apr 9, 2014

From E15:E150

Start with E16 and if it is blank than make it the same as the value above (If E16 is blank than E16 would have value of E15)

If it has a value than skip and go to next.... all the way through E150.

So an example would be:

E
15 ABQ
16
17
18 MFE
19 AUS
20
21 HOU
22
23
24
25 ATL
26
and so on

Would look like this after macro

E
15 ABQ
16 ABQ
17 ABQ
18 MFE
19 AUS
20 AUS
21 HOU
22 HOU
23 HOU
24 HOU
25 ATL
26 ATL
and so on

View 5 Replies View Related

Copy And Paste Using Range

Sep 21, 2005

can somone tell me why the attached code will not work it works for the first
range only but when others added it fails also how do you clear outline of
copied cells, i used range ("D9").Select but no good.

-- Private Sub Workbook_Open()
Workbooks("Staff Details").Activate
Range("I4:I10")("C4")("C9")("G9").Select
Selection.Copy
Worksheets("Payslip").Activate
Range("B2:B8", "C11", "K11", "K12").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone,
SkipBlanks _
:=False, Transpose:=False

Range("D9").Select
End Sub
BD3

View 10 Replies View Related

Copy Paste In Range

May 8, 2007

I need to paste in sheet2 in rows 8 to 19

Rows 1 to 7 in sheet2 might stay empty.

[A20].End(xlUp) takes care of the 19th row .. how can I adjust the range to start at row 8 ?

Sub CopyBoldCells()
Application.ScreenUpdating = False
Dim rng As Range
Range("A1:A10").Select
For Each rng In Selection
If rng.Font.Bold = True Then
Rows("" & rng.Row & ":" & rng.Row & "").Copy
Sheets("Sheet2").Select
[A20].End(xlUp).Offset(1, 0).Select
ActiveSheet.Paste
Sheets("Sheet1").Select
End If
Next rng
Application.ScreenUpdating = True
End Sub

View 9 Replies View Related

Copy Range :: Cut/paste In The Next Available Row

May 15, 2008

I need some code that will copy cells A20:D20 then cut and paste in then paste in the next available row below (some rows below may be taken)

View 9 Replies View Related

Copy Range And Paste It To Ex Only 30 Rows

Apr 10, 2014

I want do copy a range and paste to a specific range. So if the copy selection is larger I don't want it to paste the rows that don't fit.

With this code it copy a range and paste even outside my given paste range.

VB:
Range("F33:H60").Select
Selection.Copy
Sheets("7211").Select
Range("F33:H40").Select
ActiveSheet.Paste

View 4 Replies View Related

Copy Range And Paste Using Inputbox?

Apr 25, 2014

I am using below code to copy certain data(Range("C4:R46")) and paste after certain row(After 43 rows) with 50 times

I want to popup a inputbox who asked for how many time u want to paste data, if i choose 4 then paste data after certain row(After 43 rows) with 4 times

If I choose 14 then paste data after certain row(After 43 rows) with 14 times

[Code] .....

View 4 Replies View Related

Copy The Range And Paste To Another Workbook

Sep 25, 2009

i facing another problem at here and do not know how to write the part of coding. it is pending for 2 weeks. i do not know how to explain so i attach the excel to explain. i hope can get any reply soon.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved