Macro To Paste In Certain Column, Moving Over Each Time
Mar 31, 2007
I have this macro listed below that finds all these files, copies cells from stat sheet and places them in sheet1 in another file. It keeps looping till all is found and done.
My problem is when it goes to paste in sheet 1 I want it to shift over a row each time.
Right now during the first pass it pastes in column B, I want it to start in column D
The issue seems to lie right under where it says "Put data into workbook"
Public Sub PullData()
Dim wkb As Workbook
Dim lngStore As Long
Dim strDate As String
Dim strName As String
Dim Book As String
Dim Sheet As String
Dim week As String
Dim Store As String
I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.
I have a macro I found here on the boards written by Lenze to delete an entire row based on what is found in column A. I would like to delete any row where Col. B contains 10 or less characters and I have modified it to do so (or at least I think it does). My problem is that it takes about 12 minutes to run the macro (I have about 50k lines to run through). I was wondering if this is the fastest method or if it examines things other than just column B.
Sub Test() Dim i As Long LR = Cells(Rows.Count, "B").End(xlUp).Row For i = LR To 2 Step -1 If Len(Cells(i, "B")) < 11 Then Cells(i, "B").EntireRow.Delete Next i End Sub After this runs, I am left with Columns A to somewhere around AH. The columns are generally in the format of text followed by a numeric column. An individual text column has the same name through all of the rows. The numeric columns have varied values whether negative or positive. Ideally what I would like: If a given cell (ie. C2) in Row 2 is numeric, then copy the cell to the left (ie. B2) into (ie. C1) and then delete Column B. I need this to work for multiple columns from B to C, skip D and E, and then from F to AG (and maybe beyond).
I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
ABCDEFGHIJKLMNO 1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip 2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117 3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117 4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117 An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
If A2 and B2 on Sheet("Master") are not highlighted, copy and paste them into Cell A3 and B3 on Sheet("Job List - Numeric"). Do this up to Row 50 on Sheet("Job List - Numeric"). Once Row 50 is filled, jump to pasting to D3 and E3 on Sheet("Job List - Numeric") and continue up to Row 50 and so on....
I need to do this on one sheet in numerical order based upon Column A and another sheet in alphabetical order based upon Column B.
Here is what I have in code so far:
Sub Final() Application.ScreenUpdating = False Dim c As Integer Dim x As Integer For Row = 2 To 145 Range(ActiveCell, Cells(ActiveCell.Row, ActiveCell.Column + 1)).Select
I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.
In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.
I have been given a spreadsheet to fix as the user says the charts/graphs aren't adding the new data.
But when I looked closer at the workbook the whole thing just seemed a little wrong to me
Please see the workbook attached.
All the data is entered into the sheet 'Data Entry'.
Then on the 'Data' sheet it should pull thru some key values but half of it isn't done and it isn't very smart.
I have created a 'TEST Data' sheet so I could start messing with it.
I was going to pull the data thru from 'Data Entry' into the 'TEST Data' sheet using a Hlookup to make sure it worked before i messd with the actual 'Data' sheet.
The problem I am having is moving/copying the Hlookup across.
On the 'TEST data' sheet the Hlookup is as follows and is correct:
=HLOOKUP($A$5,'Data Entry'!$C$4:$M$472,2,FALSE)
But the next set of (Week 2) is not in the 2nd or even 3rd row of the array, its in row 11......... thats 9 rows down from the original.
Moving on the data i want to bring back is always 9 more than the last so the Hlookups should look like:
My code below is supposed to move filtered rows in 2 sheets ("BANK ENTRIES" and "GL ENTRIES")with "Y"/"y" character on column J which is manually encoded by user. The rule is, before they can move, the total amount in column I in both sheets should match. That is the reason why rows in both sheets should be moved at the same time. I was able to figure out this rule with the use of an If Statement and a message box.
My problem is, if I run the code where there is only 1 row remaining in both sheets, "BANK ENTRIES" would insert a blank row in the third line despite my if statement
[Code] .....
The second problem is, If I run the code on "BANK ENTRIES", my first header on the "GL ENTRIES" will be deleted. If I run also the code on "GL ENTRIES", my first header on "BANK ENTRIES" sheet will be deleted. There must be something wrong on my code. I am attaching my working file for you to have a clear visibility on my problem.
I am working with a formula that has multiple embedded IFs and therefore references the same cell multiple times. However I am also copying it between workbooks for different companies so some of the information changes which column it is in. For example, there is a formula in AA5 that has 3 references to R4 and 4 to R5 and I need all of the R4 references to be T4 and all of the R5 references to be T5.
I can't do a "find and replace" because the formula in Y5 still needs to reference R4 and R5.
I have been clicking on R4 and dragging it 3 times to T4 (and the same for R5 to T5). It just seems like there should be a way to move all of the R4 references at one time to T4.
I recored a macro to Cut the entire "E" column and paste on "A". For some reason when i read the code it doesnt capture the part where it needs to paste it in column "A".
I have a data sheet with large macro for processing the data... the last piece of the puzzle is to cut the entire row and paste it into the next available row in another sheet within the workbook if the value in column N is >0. I have tried a few things that I have found out in various places on the net but i seem to always come up with a loop or error of some sort.
I have an excel worksheet with contact info in columns rather than rows. For example, C1R1 is company name, C1R2 is address, C1R3 is City/St/ Zip, C1R5 is phone. I recorded a macro to cut and paste address to C2R2, C/S/Zip to C3R1 and phone to C4R1. That works but I cannot repeat it as I move down the list. Just re-runs macros over same cells all the time. How do I get it to start and run wherever I want it too? Also, how would I get it to delete the now vacant rows?
Currently i have a spreadsheet with realtime data feeds from Bloomberg (or reuters). What i would like to do is:
a. Fill a vector/column of data values every minute until we have 30 observations i.e. from 9.00am till 9.30pm
b. This will then allow me to calculate a moving average of the last 30 (1 minute) observations.
c. At 9.31am, the 9.00am value drops out of the column and is replaced by the observation at 9.31am. This results in a constantly updating column of the last 30 minute observations and will allow me to have a realtime moving average.
I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
I have a macro that each time I click it, takes a "Template" copies it, renames it to a new workable tab.
What im trying to add to this macro, is that each time this macro runs, to add the name of the newly created sheet to a separate tab (more or less summary page), such as if I click the tab 3 times, it will give me on a seperate page "1", "2", "3" in a column
I attached a spreadsheet with the sort of idea I wanted to accomplish.
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr Customer #1 1 1 3 Customer #2 1 3 Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?
Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?
In case its required, here is the code from the macro:
I am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.
Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.
I have data in E6-E67 on Sheet 1. Based on the date in A2 on that sheet, I need to paste to a column in Sheet 2. In excel, I am able to get the cell location through vlookup and get the correct column number/cell reference. When it gets to the paste location, I am stumped on how to format that line of code? Do I need sometime of variable? I tried to use the address/lookup code but it does not work.
