Macro To Insert Column If Not Found?
Sep 4, 2013
I would like a macro to order the columns as per the hardcoded list. If the column is not found than add the column at the position as per the hardcoded list. Below macro does the first part of re-ordering however if the column is not found how do I add an empty column:
Sub Reorder_Columns()
Dim ColOrder As Variant, i As Integer, Found As Range
ColOrder = Array("LogicalFileName", "LogicalFilePath", "UploadedDate", "UploadedBy",
[Code].....
View 1 Replies
ADVERTISEMENT
Aug 12, 2009
This code inserts a new column to the left of Column CV ...
View 6 Replies
View Related
Dec 7, 2010
I am trying to perform a simple insert macro. That will search column A for a value "Jack".
Once the value has been found insert a blank row, 2 rows up from that value. Not below.
View 9 Replies
View Related
Aug 29, 2013
I have a code that copies rows to another sheet if a value in D:D is found. BUT I need to add a "create sheet" IF the value exist.
So if VBA finds the value "TWO" in Column D, then insert a sheet at the end named "Two"
Then the code below will copy all the values of "TWO" over to sheet "TWO"
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 2 To LR
If Range("D" & i).Value = "9" Then Rows(i).Copy Destination:=Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Offset(1)
Next i
In essence, the VBA should:
Search for "ONE" in D:D, not find anything and move on.
Search for "TWO" in D:D, will find it, Create a New Sheet named TWO, then the above Code to copy all matching rows into sheet TWO.
Search for "THREE" D:D, not find anything and move on....
There will be roughly 12 sheets created on average, so if I create all sheets beforehand.
View 1 Replies
View Related
Nov 26, 2008
I’m working in Excel ’03 with a large table. I’m hoping to run a macro against a cell with value ‘X’ whenever that value is found within a particular column. I’d like this to be relative and not tied to a particular column so I can tweak it as needed down the road and run it against different columns.
In the example below, lets say I’m working with column B. I’d like something that would go through every cell in the column and run a macro when it comes across a particular value. Let’s say this value is x.
__A B C D E F
1 a x a a a x
2 b a b b b a
3 c x c c c c
4 f f f x f f
5 s s s a s s
6 g x g g g x
7 a a a a a a
8 s s s s s s
So, in my example, the macro would be run on B1, B3, and B6. And, if I wanted to go back in later, I could run this on column D and the macro would run on cell D4.
View 9 Replies
View Related
May 10, 2008
I am trying to clean up and simplify my macros by compartmentalizing frequently repeated commands. I like to search for text in column headings and define the cell containing it as a range that I can later use .column or .row commands on, so my macros are a bit more flexible. The code I currently use for this is
Dim XColumn As Range ‘the cell containing the text “X”
Cells.Select
Selection.Find(What:="X", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Set XColumn = ActiveCell
I would like to be able to create a Macro (possibly name FindSetCell()) that will accept arguments and achieve the results of the above code in other macros
I think the command might look something like FindSetCell(“text to be searched for”,”name of newly Defined Range”) But I have not figured out how to code it
View 2 Replies
View Related
Aug 30, 2012
I am trying to make a macro that will query a column J4 for a date, if the date is found say "Wednesday, July 4, 2012" (J8) get the text from Column K8 "Independence Day" and insert the text in Cell (H1).
The Macro Prints sign in sheets with the date in H2, it only prints Monday through friday. Then skips the weekend and the next date will start the following Monday.
The Federal Holiday schedule is in column range J (Date) and K (Holiday)
This is where I am stuck ....
EmployeeTimeSheet_2012.xlsm
View 2 Replies
View Related
Nov 3, 2006
I'm having problems with trying to find something in the spreadsheet and inserting a row before it. For example I would like write code that basically goes threw my rows and if it finds the "2800" then it inserts a row before that. I have now bought several books but I have yet to come up with an answer.
View 3 Replies
View Related
Jan 17, 2013
I have a list of chronological dates from left to right in a single row starting in H1 and going out to say BY1 or further
In a single column (C:C) I have random dates.
I want to insert a shape when the dates in column matches the chronological list of dates in (1:1).
I want the shape to be inserted on the row on the random date and the column of the matching chronological date.
I have this so far:
VB:
Sub Shape3()
'
' Shape3 Macro
[Code]....
This works OK but for some reason the shape changes when the next random date in column C is not found.
View 1 Replies
View Related
Jan 22, 2014
I have data in cells B2:E2 and this can go down 100+ rows.
In column B i have invoice numbers but some cells contain the word "Deposit".
I have sorted this data so that the invoice numbers appear first and then all the Deposits.
I need a code to find the first instance of the word "Deposit" and to insert a row so that all the invoices and Deposits are seperated by a single row.
View 4 Replies
View Related
Apr 3, 2014
I want to create a macro which inserts a new colum after the last colum with data.
View 3 Replies
View Related
Feb 5, 2013
I would like to automatically insert a row at each change in value in one column. See the attached sample. When the value in column C changes, I would like a row inserted. Preferrably without using any macros because they are way beyond my skill level and understanding
View 2 Replies
View Related
Apr 20, 2014
I need Macro to insert a specified number of rows in one worksheet and the same number but columns in another worksheet.
The rows are inserting fine but I can't get the columns to work. Here is what I have so far:
Sub InsertRows_Columns()
Dim iRows As Long, rngStart As Range
On Error GoTo Canceled
iRows = InputBox("How many unit rows would you like to insert?", "Number of Rows", 5)
[Code] ....
Canceled:
End Sub
View 3 Replies
View Related
Feb 13, 2008
I have 900+ excel files, with different number of columns. In all the files I want to cut the last three columns and insert them after column "L".
Can I also have the format of the three inserted columns same as Column "L".
View 9 Replies
View Related
Feb 18, 2012
I need a macro that will insert a column next to column B, and insert formulas into the new respective cells. forumula needs to be in the macro, it won't be located somewhere else on the sheet (for simplicity's sake, let's just say the formula is =A1+B1, then A2+B2 in the next row, etc). Also, it needs to stop inserting formulas when there's no more data in column B.
View 1 Replies
View Related
Jul 18, 2012
I have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
Code:
Private Sub cmdCancel_Click()
Unload Me
End Sub
[Code]....
View 9 Replies
View Related
Jan 17, 2013
I have two sheets with data. I wont excel to look for a value in colum A in sheet 2 the value to look for is defined in colum a in shet 1. If value is found it should insert in sheet one the value that is in the cell next to the found value. The data is not sorted. I have attempted and failed with using different functions.
View 1 Replies
View Related
Jul 6, 2008
I am trying to come up with a code that will copy column A entirely, and insert the copied cells into the first blank column. In the columns with information in them, there will always be text in the first cell, so that can be used as the test to find the first blank column, but I'm not sure how to get this done for my macro.
View 12 Replies
View Related
Nov 27, 2008
Pls help me do a macro that upon clicking a button it will copy and paste a column heading (located in Row1 of Sheet1) to all non-empty worksheets (Sheet 2 to Sheet N) in the workbook simultaneously. Note that each worksheet has no column heading and has the same number of columns as that of the column header in Sheet1. Worksheet 2 to Worksheet N contains data extracted daily.
View 7 Replies
View Related
Feb 24, 2009
I have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
View 9 Replies
View Related
Sep 4, 2009
I have to create a spreasheet monthly that has perhaps 60 transactions. The data is in columns A - G, with columns E and F having the costs figures. I need to sum the value in column E and also in Column F every few rows. The problem is that sometimes there are two rows per transaction and other times it could be 30 rows per transaction. Where I will be lucky is that there are two rows between transactions, and the sum goes in the first empty row.
Basically what I would need it to do, from a macro point of view is to go down column E, and every time it finds the first empty row, insert an auto sum. It would then need to ignore the next row, because it too, is empty.
Just Column E - I need an autosum in the "empty row 1's)
23.00
15.00
6.00
3.00
empty row 1
empty row 2
6.00
3.00
empty row 1
empty row 2
6.00
25.00
3.25
6.32
View 9 Replies
View Related
Jun 11, 2008
I'm working on some code that's part of a userform. To illustrate what I need, I will give an example. A column letter, 'J' for example, is stored in colNum.Value taken from the userform. I need both a column inserted before column J, and data entered into that new column in row 2 (thus J2, which would now be blank).
View 4 Replies
View Related
Aug 9, 2007
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I am using the following ....
View 9 Replies
View Related
Jan 10, 2010
I want to achieve is a procedure that inserts horizontal page breaks at certain parts of the sheet where there is a cell equal to 2. Here is the code I have so far.
Sub insert_pagebreak()
Dim printbreak_cell As Range
Dim j As Long
Dim i As Long
ActiveSheet.ResetAllPageBreaks
Set printbreak_cell = Range("AD1")
j = 1
For i = 1 To 100
If printbreak_cell.Value = 2 Then
Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell
j = j + 1
End If
Set printbreak_cell = printbreak_cell.Offset(1, 0)
Next i
End Sub
Everything works until the cell value reaches a 2, and then once it goes into the If statement I get a 'Application-defined or object-defined error' at the below line.
Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell.............
View 3 Replies
View Related
Mar 23, 2012
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
View 2 Replies
View Related
Jun 5, 2013
I need to remove values from column A that are present in column C without modifying the order in column B. To be more explicit below is an example:
Column A---------Column B-------Column C
5230400----------81,50----------1660000
3275500----------78,00----------6245700
2856300----------47,50----------5230400
1879800----------62,50----------2497900
2124300----------99,00----------1879800
2497900----------65,00
4826900----------77,50
2124200----------34,00
6245700----------61,50
3324400----------86,00
1660000----------53,00
Column A represents 600 materials.
Column B represents 600 prices. (different for each material)
Column C represents 107 materials that are present in column A and have to be removed along with their prices in column B.
Now i want to remove the materials that are in column A and C along with their prices, so i won't damage the order in the file.Meaning if i delete a row in A and shift the other materials up or down, and in the same time column B remains unchanged, the remaining materials will have different prices...and that's not good.
View 4 Replies
View Related
Apr 11, 2013
I have a spreadsheet which has "Employee: [agent 1 name]" in column A and it may or may not have the word "Break" in the same column before it mentions "Employee: [agent 2 name]". The amount of data between agent 1 and agent 2 varies and am needing code which will insert a row above "Employee: [agent 2 name]" if "Break" is not found, and add the word "Break" in column A on the inserted row. I would need this to loop through the spreadsheet until all 100+ agents have been searched.
I'm also needing this done for the word "Meeting" and would insert a row 2 rows above the next agent.
View 6 Replies
View Related
Jun 10, 2014
i want to delete the column which are blank
e.g
i have data in Column A1:N1 then delete the column O:Z
View 2 Replies
View Related
Feb 26, 2008
What formula can I use to return the value in column A if the value is found.
Something like:
=LOOKUP($M$1,$B$18:$O$31,give the value in Column A of the row of where the result is)
View 9 Replies
View Related
Jun 11, 2006
I have a set of data (time in minutes) below (fig 1) that I need to use if the total time between two entered times matches a coloms total. If it matches I want Excel to use the data in that colom to affect the data in another (fig 2) colom adding the times to each cell.
Looking at both figs. below I want Row B, Colom A in fig 2 to add Row A, Col A to Row A, Col A in fig 1 since both are the total of 19.
fig 1
Coloms A B C D
Row A 5 5 6 6
Row B 5 6 6 8
Row C 4 5 6 7
Row D 5 4 4 5
Total 19 20 23 26
fig 2
Coloms A B C D
Row A 1:00 2:00 3:11 4:01
Row B
Row C
Row E
Row F 1:19 2:20 3:33 4:27
Row F-A= 19 20 23 26
View 9 Replies
View Related
