I have a worksheet with a range of data that will change each month. Columns a,b,c and d hold data. Row 1 is my header row and the last row contains totals.
I need the range of column E to equal the value of Z1, which is declared as the last day of the month.
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedI have many workbooks which all have a summary sheet called summary, and which are all kept in the same folder (although this folder name/filepath may change from year to year).
I want to be able to set up the column headings and then copy the same set of summary information from each book so that it can then be used for analysis. The cells to be copies derive their value from formulae, it is the value that needs to be copied.
I attach a workbook with the format needed and the source cells. The source sheet will be password protected.
I know this is a question that has been raised before and I have searched the forum but not come across a question that is close enough to work from - my VB skills are appalling.
I have workbook template that I use to generate reports from a list of depts. This list is contained in a drop down cell that is a named range in a different worksheet. My current process is as follows:
-Select Dept Name from the list
-Click a command button which is assigned to code that calculates and saves to a file
-Repeat for next report until all reports are generated
I would like to automate this process by producing all reports with a single command with the following functionality:
-The Dept Name needs to be populated in the specified cell containing the current drop down because it drive various vlookups and other formulas
-If possible, I would like to retain the drop down functionality as I would like to have the option of running an individual report or running the “batch”.
I am trying to use a macro to check if any cells in a range of cells are less than 0 before proceeding.
VB:
Sub Macro()
If Range("F2:F49") < 0 Then
MsgBox "Please verify column F."
Exit Sub
[Code] ....
My Cell Range is ("J3:L28") and I want it to export to a txt file with the File name from Cell (M2) to C:Test. Macro to make a push button for this?
View 3 Replies View RelatedI am currently using the following macro to input a formula into my worksheet:
View 12 Replies View RelatedIs there a way to dynamically calc a range of cells with a multiplier without having to insert the multiplyer variable in the cells?
Ex. My multiplyer in cell b1=2. I have values from equation in cells b4:e10. Without including the multiplier (b1=2) in b4:e10, can I update the values in b4:e10 based on my multiplier via some macro? Similar to the Range Format function macro?
if it is possible to format a specified range of cells if one cell has a certain value. For example: If anywhere in column A the word cash appears I want to format 4 rows down from "cash" and 6 rows over from "cash" say green and put borders around it.
A B C D E F
1
2
3
4 CASH
5
6
7
8
I currently have the following code to copy and transpose data from one worksheet to another:
Range("E3:E6,E10:E53").Select
Selection.Copy
Sheet3.Range("A65536").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues, Transpose:=True
What I would like to do is add to this code. I would like to add the following formula to the cell at the end of that pasted row. =VLOOKUP(Range,LeaveIndicator,6,FALSE). In this case the Range needs to be Row D and the last row of sheet3.
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e.
User Group:
Item
Lodgement Ref
Batch Totals:
User Group:
Item
Lodgement Ref
Lodgement Ref
Lodgement Ref
Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
I wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
I want to run a macro any time any cell in a range is double clicked. I can make it work with just on cell, but not any cell in the range.
View 3 Replies View RelatedMy Cell Range is ("K3:L28") and I want it to export to a txt file with the File name from Cell (M2).
View 9 Replies View RelatedI am trying to create a macro that would be able to delete an entire row of data if a value in column A is equal to a range on a different sheet.
On Sheet “ISQ Raw Data”
If any value in column A (starting in row 2) is equal to a value on Sheet “Old Response IDs” Range A:A(all of column A)
Then Delete that entire row in Sheet “ISQ Raw Data”
a macro script that will make cell in a certain range to zero?
In my worksheet, I have the user input numbers between B2 and B15, C2 and C15,... down to F2 and F15. I want it so that if the user clicks a "button," the macro resets all the cells in the above mentioned range to zero.
In my sheet I have a range on the go called 'cells_replen', I then need to search through the sheet and if a cell matching a given criteria is found I want to add it to the named range. The idea is that when I've done all the adding I can just select the range and then go back through the cells later on without searching for them all over again. The first code that declares the first cell I need in the range is:
ActiveWorkbook.Names.Add Name:="cells_replen", RefersTo:=Range("A3")
That works fine, I can also manually add cells into the range as below:
ActiveWorkbook.Names.Add Name:="cells_replen", RefersTo:=Range("cells_replen, A9")
No problem if I want to just add 'A9' but because I'm searching through the sheet, I need some way to just add 'ActiveCell' or similar.
I have a range "RangeOne" and i want to check the range row by row.
In each row I want to check for value in second cell. If the value is 10 or more then the entire row in the range should be selected and then execute a macro. If the value is 0 to 10(but not 10 exactly) then the row in the range should be selected and then execute macro2.
I recorded one for an autofill series which basically came out as
View 4 Replies View RelatedI created a named range formula:
=TEXT(TODAY(),"m/d/yyyy")&" "&TEXT(NOW(),"h:mm AM/PM")
The goal of that formula was to return a Date/Time stamp that is fixed and doesn't change over time. The formula is intended to run in which ever cell that I select to enter it into. I named the formula:
=DS
What I am trying to do is create a macro that will run the formula using a hot key function. I want to be able to select a cell and hit CTRL D and have that above formula run in that cell. I have multiple sheets in my workbook and I need the macro to be able to run on any sheet in my workbook. Below is what I have:
Sub DateStamp()
'
' DateStamp Macro
[Code]....
I was trying to apply the macro to only a certain range of cells on any given sheet.
I am looking to run two separate macros. I have a project plan and I am looking to be able to select a button whereby on-click, a new row is created within a selected cell. However if the cell clicked is outside of a pre-determined range, then the task is automatically entered at the bottom of the plan. I would like for the copied row to go ABOVE the selected cell and have all of the same formatting as the row below (not the top - as is default in Excel).
The second is going to be very similar but will copy a task category (like a header item) and the first task (row) found below. It will also be copied from below and be inserted above the selected cell.Both macros will clear certain cells, whilst maintaining the contents of others, with formula contained. I.E. Columns C,D,E,H,I,J will be cleared.
I have a spreadsheet that contains the 5 digit numbers in the rows and the columns respecstively. I'd like a formular or macro to change font color for each cell. If the combined value of the 5 rows are greater or less than the combined range 87030 and 87200, the 5 cells will be changed to Red. If:.........
View 4 Replies View RelatedI am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.
14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
I have recorded a macro to sort a range of cell based on two values that is dependent on time in another cell. I now want the macro to run automatically when refreshing the workbook with F9, so as the time changes so will the sorting. Everything works fine except the sorting doesn't refresh when F9 is refreshed.
My recorded macro is:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim X As Long, FillCT As Long
For X = 1 To 4
If Cells(Rows.count, 1).End(xlUp).Offset(0, X - 1) <> "" Then FillCT = FillCT + 1
[Code] .....
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
I am using Windows 7 and Excel 2010.
Is there a way to create a macro to color code a cell based on the value in a cell, and then look up a value in a table, then color code it based on where it fits into the table?
I have a table of values for about 30 projects. In column g - there is a CPI value (see bold column)
Example: Project ID
Name
Program
PMT
SI ID
AC
Milestone
TCP Level
[Code] ......
Here is the table:
I have to color code a cell, base on the CPI and how it fits into the table below. So if the current Milestone is M2 or M3 and the CPI calculated is .14 the cell would be colored RED, if the CPI number is 2.01 for M2-M3 I would want cell to be colored Turquiose. If we were at Milestone M6 and the CPI was 2.01, it would be colored blue. If the CPI was .75 at Milestone M5, it would be colored Green
LEGEND
Earned Value Limits
Milestone
RED
Yellow
Green
Turquoise
Blue
M2-M3
2.15
M4-M6
1.66
M7-M11
1.26
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....