Macro To Adjust Values In Columns
Nov 2, 2007
I'll admit I know very little about creating a macro in Excel so I hope someone can help me out with creating what I consider a fairly simple macro to adjust values in a column or columns.
What I am using this worksheet for is a merchandise database that contains 3 columns of pricing values, ie. Column headers Small, Medium, Large.
The columns are approximately 2000 rows deep.
I need to change the pricing values in all 3 of these columns by a specific amount. However there are some values in the "Large" column that will not be adjusted. Those values not adjusted will be based on the contents of another cell in the same row that would only contain the data "OT,JB" or only "JB".
I've considered using find/replace but think it would be very inefficient.
Right now I am looking to lower the price values by 2 dollars. All values are numerical and formatted as Number/General. ie, 11.95, 7.95
I've considered creating another column or linked worksheet and forumla-ize it and then copy/paste my value results back, but I am hoping for something less cumbersome, something that is expandable as the worksheet grows, etc. I think a macro, but I do not have any idea what to do or how to get started.
View 14 Replies
ADVERTISEMENT
Nov 17, 2012
1. Is there a faster way to adjust the size of the columns? I had to use my mouse to stretch the column out. This can be quiet time consuming if there are 8 columns needing to adjust to the same size. ie Col A, B,I, J needs to be the same size.
2. Can Excel determine the best size for the column? Say I need a column with data saying "yes" and "no" and a column for the letter "X" only or do I have to stretch the width of the column myself?
View 1 Replies
View Related
Apr 4, 2008
I'm using a template that has formulas using a $ sign to attempt to stop the ranges they refer to changing. The problem is, when I use the template (which involes Access importing some data and adding columns to the sheet the formula refers to in the process) the rows referred to in the formula change in line with the number of rows of data that have been imported. Only the row numbers change not the column headings. So for example:
=( SUMPRODUCT(((Workings!$H$3:$H$1000=Explanation!B9)+(Workings!$E$3:$E$1000="Buy")*(Workings!$J$3:$J$1000))))-998
becomes
=(SUMPRODUCT(((Workings!$H$511:$H$1508=Explanation!B10)+(Workings!$E$511:$E$1508="Buy")*(Workings!$J$511:$J$1508))))-998
View 3 Replies
View Related
Jul 25, 2006
Range("B25").Name = "EndMull"
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
View 2 Replies
View Related
Nov 9, 2008
Is there a way to make a macro to make this true?
The WS is 300 rows,
The column width is 6.90
If LEN(B1)>147 then format ROW Height to 0.25
If LEN(B2)147 then format ROW Height to 0.25
If LEN(B300)
View 9 Replies
View Related
Jul 22, 2008
I have been the code below in many a different form since royUK first helped me find a certain value and delete the entire row. I've used it to find values, text, multiple conditions and so on and so forth, but I cannot figure out how to compare the cell to the cell directly above.
View 10 Replies
View Related
Jun 13, 2009
The macro below works perfectly except for one problem. I only want it
to set the print area from Column A - Column M . It currently selects data i have in Columns N and beyond and i do not need that to print. From A - M is 13 columns.
View 4 Replies
View Related
May 3, 2014
i want a code to adjust the column A:Y from width
View 9 Replies
View Related
Jun 22, 2012
I want to concatenate two Cells into a single cell BUT have the first field left justified and the second cell right adjusted.
A1 = "John Williams", A2= "Single"
A3 = "John Williams Single"
View 1 Replies
View Related
Mar 5, 2013
I have a worksheet used for a car game. Each row is designated to show one particular car that can be used in the game, so let's say that there are 40 cars taking up 40 rows.
Column A shows the car type and model; column B shows the engine that the cars has represented by a number (the higher the number the better the engine is); and so it continues, Column C shows the transmission; column D the brakes etc.
Underneath the 40 rows (lets say from row 45 to 65) I then have a table with spare-parts that can be used to replace the cars existing parts. This Parts-table is also arranged with engines in column B, transmissions in column C, brakes in column D etc...
This point of this layout is that it should be easy to compare each type of part in the spare-parts table with the corresponding type of part already used in any of the cars as everything is perfectly lined up by the columns.
About the spare-parts table: because the inventory in the spare-parts table often are added to or subtracted from, as parts are won in races or being put on the cars, I have created a macro to sort the parts in each column so as to put the best parts at the top of the table and the bad ones towards the bottom - so far so good.
The problem is this - as I add new cars, the table of spare-parts is pushed down worksheet and that means that the macro no longer will reference the right rows. So the question is this, how do I automatically update the macro to adjust for rows being added above it? I am not really interested in redesigning the worksheet.
View 2 Replies
View Related
Feb 19, 2010
I need the macro to put Rec sheet data for each bank in Sheet Summary under the Each bank header, the macro needs to figure out the number of rows required and adjust if necessary as the rec data is not fixed. See below examples
Rec ABCDEFG5CategoryRecAccountValue DateEntry DateTypeAmount6CITIBANKCASH AMP1WTGDPFUSD1-Oct-075-Dec-08LDR-2,203.677CITIBANKCASH IMS02WTFPT2USD24-Jun-0817-Dec-08SCR2,001.388JP MORGANCASH DESWTFPT2USDSUSP15-Sep-084-Sep-09LDR-3,608.919RBSCASH DESWTFPT2USDSUSP15-Sep-084-Sep-09LCR3,889,582.9410BOACASH DESWTFPT2USDSUSP16-Sep-0829-May-09LDR-1,557,609.9511BOACASH IMS09ZPBRKQUSD17-Sep-0817-Dec-08LCR4,554,511.1112 13 14 Excel tables to the web >> Excel Jeanie HTML 4
Summary ABCDEF6CITIBANK 7RecAccountValue DateEntry DateTypeAmount8 9JP MORGAN 10RecAccountValue DateEntry DateTypeAmount11 12RBS 13RecAccountValue DateEntry DateTypeAmount14 15BOA 16RecAccountValue DateEntry DateTypeAmount17 18 19 20 21 22 Excel tables to the web >> Excel Jeanie HTML 4
Summary ABCDEF4 5 6CITIBANK 7RecAccountValue DateEntry DateTypeAmount8CASH AMP1WTGDPFUSD1-Oct-075-Dec-08LDR-2,203.679CASH IMS02WTFPT2USD24-Jun-0817-Dec-08SCR2,001.3810 11JP MORGAN 12RecAccountValue DateEntry DateTypeAmount13CASH DESWTFPT2USDSUSP15-Sep-084-Sep-09LDR-3,608.9114 15RBS 16RecAccountValue DateEntry DateTypeAmount17CASH DESWTFPT2USDSUSP3970640060LCR3,889,582.9418 19BOA 20RecAccountValue DateEntry DateTypeAmount21CASH DESWTFPT2USDSUSP3970739962LDR-1,557,609.9522CASH IMS09ZPBRKQUSD3970839799LCR4,554,511.1123 24 25 26 Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Jul 22, 2006
I'm creating a mailing list by pasting text into a spreadsheet, then spending hours cutting and pasting the company name into column c, address into column d, city into e...and so on. Then move down 5 rows and do it again.
I'm not sure where to start, I recorded several macros but none have worked.
View 8 Replies
View Related
Apr 25, 2014
I have the following macro that imports data from several input files and rearranges it in a master file.I want to change it so that I can use it in each of the input files. Therefore, it should look in the input file for Spreadsheet "XYZ" and rearrange it in Spreadsheet "Data".
[Code].....
View 9 Replies
View Related
Apr 13, 2013
I need a User Defined Function (UDF) to Vlookup duplicate values in separate Columns.
I can't use an Array function as the data is huge and it takes lot of time to calculate.
I have attached a Input and the desired output in the file attached.
UDF_MACRO.xlsx
View 9 Replies
View Related
Jun 22, 2013
I'm trying to create a macro that will add a blank row each time the values changes in two different columns. I’ve got a macro that sorts the data on two columns, just need to add rows after each change in both columns.
I've found something that'll add rows after each change in one column, the problem is adapting to add rows after each new value in a 2nd column as well.
What I have so far works until it hits the first empty row inserted after sorting by first column.
Sub SplitList()
'
' SplitList Macro
' Macro recorded 05/03/2004 by GaryB
rw = 5
myval = ActiveSheet.Cells(rw, 4).Value
[code].....
Here’s a data sample after performing my sorts, but before the macro to add spaces:
Another, Guy CDP EX 8.36 8.36 0 0 0 0 0
Jones, Some CDP SS 3.3 3.3 0 0 0 0 0
Justa, Nother ESP NV 22.45 22.45 0 0 0 0 0
Person, One ESP SS 23.36 23.36 0 0 0 0 0
Tom, Rich SSP MA 2.35 2.35 0 0 0 0 0
Dude, Steve SSP UN 63.86 25.36 5 1 2 1 1
Blanke, Spaece SSR MA 12.24 12.24 0 0 0 0 0
Try, Again SSR MA 15.25 15.25 0 0 0 0 0
And after the attempt to add rows: (note that it added a blank row between the first and 2nd rows (which differed in the 3rd column), but that it then stopped.
Another, Guy CDP EX 8.36 8.36 0 0 0 0 0
Jones, Some CDP SS 3.3 3.3 0 0 0 0 0
Justa, Nother ESP NV 22.45 22.45 0 0 0 0 0
Person, One ESP SS 23.36 23.36 0 0 0 0 0
[code].....
And, what I’d like it to look like:
Another, Guy CDP EX 8.36 8.36 0 0 0 0 0
Jones, Some CDP SS 3.3 3.3 0 0 0 0 0
Justa, Nother ESP NV 22.45 22.45 0 0 0 0 0
Person, One ESP SS 23.36 23.36 0 0 0 0 0
[code].....
You can see, it seems to be hanging up once it hits a blank row after first round of inserted rows.
View 3 Replies
View Related
Dec 5, 2006
I have attached a file with an example of what I need. The data tab show the data has been given to me. I need it in a different format to be able to load it into our system. The Needs tab shows what format I need. Basically, I need to convert this table into a flat file, where there is a record for each "X" value only.
View 2 Replies
View Related
Feb 21, 2014
I am trying to create a macro that will compare several un-formatted workbooks and copy just what I want to a workbook of my one.
I start by having 2 different workbooks opened ("Main" and "Change") side by side like this: 1.jpg
Then i run the macro in my "Main" workbook and it should appear an Userform like it showed in the image below: 2.jpg
This is so that i can manually fill the user form with the correct columns by looking at the excel file, for example:
Ref=E3;City=G3; Data=I3.
Pressing Ok, it fill the "Main" workbook with the matching information so it and closes the "Change" workbook.
At the moment my code is in this stage:
VB:
Private Sub CommandButton1_Click()
myfile = "C:Userssst1brgDesktopRelatorios" & TextBox1.Value
Application.Workbooks.Open Filename:=myfile
Windows.Arrange ArrangeStyle:=xlVertical
[Code] .....
But I am stuck because there isn't any error and nothing happens.
View 1 Replies
View Related
Oct 26, 2012
I have a long (190,000) list of customer data, all in Column A (unfortunately with blank rows among it, but working now to fix that).
Down the column, individual customers are bookended by a "adf" and a "/adf". (these have open and close brackets like HTML code, but I cannot reproduce them in this forum).
For each customer, I need to find the rows that begin with (brackets spelled out since I do not know how to show them):
1. [open bracket] vehicle status
2. name part=3D"first"[close bracket]
3. [open bracket]name part=3D"last"[close bracket]
4. [open bracket]email[close bracket]
5.[open bracket]phone time=3D
6.[open bracket] name part=3D
And transpose only those rows it into columns.There is a dynamic number of rows for each customer, so there's no way to simply count and transpose, as the columns would all be mis-entered.Somehow it needs to recognize those 6 row items, and transpose those values only, with the and the only telltale of a start and finish of a specific customer.
EDIT: How about a macro to delete all rows except those that contain those partial values above?
View 3 Replies
View Related
Feb 11, 2014
I have this nice macro that copies data from another workbook. I want to make it to also add the filename of the workbook (for example data.xlsx) it copies the data from, in a cell on the actual workbook (for example on sheet "Combined", Cell A10). What should I add to my macro?
View 3 Replies
View Related
Apr 1, 2014
I am trying to adjust the below macro so that it will work in Excel 2010.
Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer
[Code]....
View 3 Replies
View Related
Jul 17, 2014
I have on sheet1 a number (72 at the moment) of Form CheckBoxes.
In simple terms: I would like a macro to look at each CheckBox and remember its state (Checked or Unchecked)
Then, go through and Check All checkboxes
Call MyMacro
Once MyMacro is complete (Filtering & Printing)
Revert the checkboxes to their original state.
The purpose of the checkboxes:
When Checked column on sheet2 is UnHidden
When UnChecked column on sheet2 is Hidden
Or, UnHide All columns on sheet2, run MyMacro, then "re-hide" the columns that were previously hidden.
View 11 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Mar 26, 2014
I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)
IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL
Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)
Find the attachment & basic code take this code for this task
[Code] ....
toggle-2.xlsb‎
View 5 Replies
View Related
Mar 14, 2014
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
View 2 Replies
View Related
May 15, 2014
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
View 5 Replies
View Related
Apr 17, 2009
I have 12 columns of data. In those 12 columns of data I have 3 digit numeric IDs. I want to count the unique number of IDs for each row. I have about 14K rows.
What would be the best way to do so?
Some rules about how the data is stored. I have 12 columns of data with anywhere from 1 to 12 columns having data for each respondent. Data always fills left to right and never skips columns.
I have attached an example file that represents how the data is stored and the output I would like (Unique Count).
View 7 Replies
View Related
Apr 21, 2014
I have different reports, some have fifty transactions, others have thousands. My goal is to: Insert a new row every time the values in the "Account" column meet a certain criteria, AND THEN add the totals for the Debit and Credit Columns.
Let's say I start with a table that looks like this:
A
B
C
D
Dept
E
Account
T
F
F2
G
Debit
Credit
Total
33010
[Code] ....
I want to group the first four rows because Accounts 33010 and 33015 are in the same department. Same with 50050 and 500060. I want to then insert a row below the last row with "33015" as its Account #. And add the values for Debit and Credit. It'd look like this:
A
B
C
D
Dept
E
Account
[Code] .........
Honestly, I have tried everything. Running a Macros with Relative reference does not cut it.
View 8 Replies
View Related
Feb 21, 2009
what I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
View 5 Replies
View Related
Apr 23, 2014
I have file with so many columns and i want to keep only columns i want.
Data
genredyellowgreenwhiteblue
1aaggttccbb
2aaggttccbb
3aaggttccbb
4aaggttccbb
5aaggttccbb
expected
genredwhite
1aacc
2aacc
3aacc
4aacc
5aacc
for example here i want to keep only gen, red and white columns only out of columns what i have in my data. I have so many columns in my original data but here i given just small example. How to proceed with macro or any other way because removing manually taking long time for me.
View 6 Replies
View Related
Feb 3, 2008
I would like to do some calculation with percentage as it showing in the attached file.
[url]
View 9 Replies
View Related
