a macro (that i will link to a control button) that will autofilter a data set. The problem i have is the macro i wrote below, It might not be the best looking macro in the world, but it would work for my purposes if i can get the part that does the autofiltering to be more dynamic. meaning, instead of a hard coding "Retail" in the macro, id like it to reference a cell so that the user can type whatever they want, then click the button and it will filter based on what they type in.
this is what i have
Sub Filter_Button()
With Sheet2
AutoFilterMode = False
Range("A6:M6").AutoFilter
Range("A6:M6").AutoFilter Field:=2, Criteria1:="Retail"
End With
End Sub
I am attempting to create a macro that will carry out vlookup for each row in a data set
For simplicity testing this on a sheet where A1:A10 contains data 1 to 10, and B1:B10 contains a to j, and putting the result of the vlookup into column E.
The code I have written is:
[Code] .......
When I attempt to run this I receive an error message that says, "Unable to get the VLookup property of the WorksheetFunction class."
I have a large itemised call bill that i need to do some regular analysis on and wondered if I could automate most of it.
In column C is a list of mobile numbers, in column F the numbers they called (this is an itemised bill so each line represents one call, meaning each number has multiple rows) finally in column K is the cost of each call.
I want the macro to look through column F (number called) and if there are less than 5 instances of that number that are under 0.30 each in cost to be deleted.
Example: if in column F the number 07500 100100 appeared once with a cost of 0.29 I want it deleted but if it appears 6 times with an accumulated cost of 3.50 i.e. more than 0.30 per call averaged out, then i want it to remain on the sheet
I am recording and editing steps in order to procure unique ID's from a dataset and eliminate the manual intervention for this process. Macro works seamlessly in most of the scenarios except for the one mentioned below where it performs a step which is not really required.
Let me explain the scenario in detail:
-Sheet 1 contains the list of trades as per client's system and Sheet 2 contains the trades as per internal system -Need to do several permutation and combination in Sheet1 in order to extract the unique ID's from Sheet 2 -Scenario 1 - lets assume I have 100 records I concatenate few common fields in both sheets and use the simple code mentioned below to fill the all rows with the lookup formula
First scenario itself might populate the unique id's for all the 100 trades or might give partial result which will prompt for the next scenario. If the first scenario generates the Unique ID's for 99 records I can filter on "#N/A" and update a different formula to fetch the unique id using different combination. However in the initial stage I wouldn't know the # of unmatched records because of which I have the standard selection till end and fill down codes in the macro, which would end up filling all the blank cells till the end, which takes unnecessary time.
simple validation code which ensures that if the # of unmatched record is more than 1 only then the selection till end and fill down codes comes into picture otherwise simply update the formula and populate the result.
I have an Excel 2003 worksheet that has a list (Data > List > Create List), which displays the AutoFilters for each column in the list. I am seeking a macro that will filter the results (Custom > does not contain "Closed").
I would like to assign the macro to a button as the casual user might not understand the AutoFilter use.
The worksheet in VBE is defined as "Sheet3 (Audit Findings)" My list has headers on row 7 (A7:K7) I would like the AutoFilter to return all results except those marked as "Closed" in column K.
I am fighting a quixotic battle against a problem, that I realise may well be unsolvable. I have a worksheet that consists of approximately 27,000 rows in a four-level structure, like so:
1 1.1 1.1.1 1.1.1.1
To make the sheet easier to navigate I have created an expanding/collapsing tree structure by using simple hide and unhide rows, and on the last level of headings (1.1.1) I have cells that change between "+" and "-" depending on whether the fourth-level subset is currently visible or hidden. Naturally I need to keep the cell as "+" when the set is collapsed, and "-" when expanded. I have accounted for all methods user can change the hidden settings of those rows, but one:
When users autofilter the list, the +/- signs obviously screw up, because filtering resets the user-set hidden-settings. Suddenly I have expanded subsets with "-" on headings that were previously "+". Now this is obviously a vanity problem, as the +/- sign is not integral to the working of this macro, but the problem is that with three different levels of headers the worksheets starts to look a little cluttered.
Finally, my question: Is there any way to trigger a procedure to reset these signs upon/after autofilter? I realize that this is not a built-in Excel event, but a workaround will do just fine. Any way to detect that an autofiltering has taken place without having to check the.
My problem is following: I have a list of data that are classified according to a particular character, and I want to copy (with auto filter through the macro) the relevant information to the appropriate place in the sheet where it belongs. That's no problem. The problem is that if I want to copy data, classified by a character that is not listed in the table (that is not in the filtering criteria), then all the data are copied to the appropriate place. But I do not want to copy in this case nothing. How should such a macro look like?
I have a main workbook with 40,000 lines of data for various locations. Column A shows the locations. They all have the same fields in column B to N
I am looking for a macro that will filter on column A (Location name) & for every location in that’s in there, Copy it, open a new worksheet, paste the data for that location into it, plus, name the tab the same as the location name that’s been pasted in there.
I am trying to create a macro to autofilter a sheet based on the value a user will enter into a popup box. I have found bits of code which I have been attempting to figure out and use somehow however I am getting more lost.
I can create a basic macro to autofilter, the problem I am having is that I am unsure of how to link this to an input/popup box of some sort
I know how to filter based on cell value, and how to auto filter "does not contain", but is it possible to combine these? i.e. Filter OUT the value of a cell from a range?
I recorded a macro to custom AutoFilter 2 columns in a worksheet. The information will be filtered between 2 dates; i.e. >= cell B2 and <= cell C2.
Both cells are formated to dd/mm/yy so i entered 1/12/06 (for 1st Dec) in cell B2 and 31/12/06 (for 31st Dec) in cell C2.
When i enter these 2 dates, click the button to run the macro and check the custom filter in the "Planning" worksheet it appears that the dates change to 12/01/06 and 21/12/06 and no records appear - although i know at least 65 rows should show.
If i then enter the dates in B2 and C2 as mm/dd/yy instead (but leave the date format of the cell as dd/mm/yy) the filter works perfectly; i.e. enter 12/01/06 and 12/31/06. However I plan to issue this spreadsheet out to other staff and as every other date in the spreadsheet is in the uk format dd/mm/yy i dont want to confuse them by insisting they use the mm/dd/yy format for this one function.
Has anyone ever encountered this before? and if so is there some way i can fix it?
Heres the code for the filter:
Sub Monthly_Stats()
Sheets("Planning").Select Selection.AutoFilter Field:=5, Criteria1:=">=" & Sheets("Filtered Statistics").Range("B2").Value, Operator:=xlAnd _ , Criteria2:="<=" & Sheets("Filtered Statistics").Range("C2").Value, Operator:=xlAnd Selection.AutoFilter Field:=82, Criteria1:="<>" End Sub
The code contain using Autofilter to some columns, & then copy paste to another sheet to first blank row, & sorting it by asscending in Column A. Both sheets are in the same workbook.
But for some reason, the Macro will giving the result expected if i run it step by step (by using F8 button under window VB editor). And if i call the Macro name it stoped in the middle of the process.
I'm using Excel to map automotive parts to vehicle applications (two different spreadsheets) for importation into a relational Access database. Production dates for parts rarely match the on-sale dates of the cars, so I've set up a macro that:
1. copies the start production date for a part record into the vehicle workbook at the top of the 'discontinued' column, 2. copies the end production date for the part into the vehicle workbook at the top of the 'release' column, 3. uses these pasted data points as criteria for the autofilter in the vehicle workbook as 'vehicle release date' < 'part end production date' and 'vehicle discontinued date' > 'part start production date'.
I find that the macro works perfectly in the autofilter for the vehicle discontinued date, but not for filtering the vehicle release date. The date is copied and pasted OK. When I check the custom filter dialogue box, the date has been entered in with the 'is less than' menu item selected, but it doesn't bring up any records unless you click on the 'OK' button once the dialogue box is open. I want to run the macro without having to run the autofilter manually at all. To troubleshoot the issue, I broke up the macro into two separate macros, one for release and the other for discontinued. Problem remains, even though the only difference between the two macros is the relative cell addresses. I've checked formatting of the cells for text vs. numeric and that doesn't appear to be a problem.
Two macros have been developed in order to write entries to a sheet called Detention Register from another sheet named Database.
The first macro (AutofilterDatabase1) filters for two criteria in the Database sheet: 1. All dates 7 or more days prior to today's date (5th field called rDate) & 2. The smallest positive value for a person in field 10 (called rSmallest).
Once these filters have been applied a second macro (named WriteDetentionRegister) is supposed to write the filtered entries to a sheet called Detention Register. However, if no enties at all are found by the filter it writes all entries to the Detention Register. Is there any way of stopping the writing process if no entries at all are found after the filtering process?
I'd also prefer it if after the writing process (or not as the case may be) that all autofilters were returned to displaying 'All' data in the Database sheet for fields 5 and 10. Is this an easy tweak to make to the existing code?
I enclose the code of the 2 macros.
Sub AutoFilterDataBase1()
Application. ScreenUpdating = False
'Get today and convert to serial value, subtracting 7 days d = CLng(Date) - 7
I'm having in trying to run a macro. The macro entails a simple copy and paste special over to a new worksheet. I used the auto filter as well to get rid of the non-blanks. It works fine when I copy and paste special over to the new worksheet, but as soon as I run the macro, it doesn't copy over and returns an error.
I have a column in a sheet that has two different values in it "SB" and "SEI".
I want a macro that will allow me to switch the auto-filter between the 2 at with a shortcut button.
I have a macro that will switch the auto-filter on and off, but I was wondering if anyone had anything that will automatically switch it between two values.
working with a macro to auto filter out all NON-NUMERICS in a column chosen by the user. heres the code i'm working with now:
Sub DeleteAllAlpha() Dim rTable As Range Dim lCol As Long Dim vCriteria On Error Resume Next With Selection If .Cells.Count > 1 Then Set rTable = Selection Else Set rTable = . CurrentRegion On Error Goto 0 End If End With If rTable Is Nothing Or rTable.Cells.Count = 1 Or WorksheetFunction. CountA(rTable) < 2 Then............................
I would like to include a filter in my macro that shows orders with current date, and sometimes current date minus one (yesterday). This is a monthly recurring task. In the custom filter I tried: "equal to @Today" but that didn't work. Can someone tell me how I can solve the problem? Here's a snippet from my macro, filterne on something else Selection.AutoFilter Field:=21, Criteria1:=">=89" 'STCD_TO_TODAY
I have a macro that automatically updates the field value if certain criterias are met. Now the user asked that TYPE be the first column in the spreadsheet. How do I change the last line in my macro to reflect that?
The range has now also changed from "A1:AT1000" to "A1:AG1000" ..
how to make this recorded macro work with more than the sheet it was recorded on. I need to work with the visible selections. But I'm having all kinds of problems trying to pick just the visible cells. Not having any luck with this project. I tried to included a test book but It keeps giving me an error.
