I have a macro that automatically updates the field value if certain criterias are met. Now the user asked that TYPE be the first column in the spreadsheet. How do I change the last line in my macro to reflect that?
The range has now also changed from "A1:AT1000" to "A1:AG1000" ..
in coverting these fields into a date field.
Example 91306 to 060913
I have encloed the file.
I m trying to use an Autofilter to filter my cells with a Number Filter of is greater of equal to 4 and is less than or equal to 5.
But as you can see I would like to customise is using a range of 2 values which i have specified in Cell P1 and Q1.
I manage to figure out how to reference to this cell, but Im not sure how can i put my ">=" and "<=" operators into my code so i can get it to work exactly how i want as shown in Code 1.
Code 1
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=">=4", _
Operator:=xlAnd, Criteria2:="<=5"
Code 2
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=Range("P1").Value, _Operator:=xlAnd, Criteria2:=Range("Q1").Value
I'm trying to modify a worksheet and I'm having mental block. Basically I have the A:N columns full of data, and about 40 helper columns after that. All the helper columns being referenced by many macros.
I now have to add one more data column after the N column, so the helper columns will be cut and pasted one cell to the right.
The question is, how do I efficiently modify the code that looks at the helper columns to take into account the "1 field to the right" movement of the helper columns? Here is an example of the code
[Code] .....
There are tens of references across the project for every helper column so doing it manually is impossible.
I am writing a code that will filter based on a named range. My named range is "Region," and it is currently in column B, but may be in Column C, D, E, etc., based on additional columns that the user of this sheet may add in the future.
I first had code like this (before using a named range):
HTML Code:
Sub CopyRegions()
Dim LastRow As Long
With ActiveSheet
LastRow = ActiveSheet.Cells(.Rows.Count, "A").End(xlUp).Row
End With
Application.ScreenUpdating = False
Range("B8").Select
ActiveSheet.Range("$8:$" & LastRow).AutoFilter Field:=2, Criteria1:="Europe"
But then I named column B to "Region," and so I want to do the same thing as above, but I don't know what to put where it has the number "2" - "AutoFilter Field:=2" because it may or may not be the second column in the future.
When activating Autofilter in a wide table, the only way to determine which criteria field was selected is to try and identify which drop-down arrow has become blue. When working on a laptop, it is rather difficult to identify the difference between the black arrows and the blue ones. Is there a way to have a macro or event procedure that will cause the selected criteria field (or fields) change its background color (into yellow, for example)? This way, the yellow fields will "stand out"… No more searching...
View 3 Replies View RelatedI would like to determine if the VisibleDrowndown is TRUE in the attached table.
The current macro sets it to FALSE in field 1. However, I want to identify when it is TRUE so I can run this macro.
Attached File : V1.xlsm‎
I am looking to adapt a piece of code (originally created by Ger Plante) so that it autofilters multiple columns of a table. I have three data validated lists that need to search 3 different columns in the table and filter accordingly, but also show all if no hits are made (hence why Ger Plante's code) was perfect in most respects. I would ideally like to keep the code as a Worksheet_Change event, but can deal with it being run as a normal Macro via a button if this is necessary.
[URL]....
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1")) Is Nothing Then
Range("A5:C5").AutoFilter Field:=1, Criteria1:=IIf(Trim(Range("B1").Text) = "", "<>", "=") & Range("B1").Text
End If
End Sub
I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
View 5 Replies View RelatedI need to be able to filter out the same field with multiple macros. Like I need to filter out all rows with "A" in them and I then need to be able to filter out all rows with "B" in them but without restoring the "A".
I can make the multiple filter work just fine as long as the Field is a different value but I can't figure out how to make it work with the same field.
I have a problem very similar to this thread: [URL] .... Therefore I have tried to adapt but so far failed.
My requirement is that a userform pops up with multiple comboboxes (in this scenario 3) and once the results have been selected and the user clicks the button "OK" then the autofilter changes to the same as what the selected ComboBoxes were.
So, there are 3 comboboxes so I have tried the following:
VB:
[PrivateSub CommandButton1_Click()
Worksheets("Data").Activate
If Sheets("Data").AutoFilterMode = True Then Range("B3", Range("B600").End(xlUp)).AutoFilter
Range("B3", Range("B600").End(xlUp)).AutoFilter Field:=1, Criteria1:=ComboBox1.Value, visibledropdown:=False
[Code] .....
If I had a table of data (say in range A5:D15) and then I autofiltered that table in vba with...
range("A5:D15"). autofilter
Is there any way that I can change the positioning of the autofilter drop down arrows, to row 1 say, rather than the usual row 5 (the top of the table)?
Using Pivot Table, I added a field to the "Values" field in order to give me a sum of the numbers. The title automatically changes to "Total", I am needing it to show "Total Invoice to OOM Delta". Is there a way to do this? I tried the Active Field option, but that's not working for some reason.
View 9 Replies View RelatedI have used the archive and Mr Excel and cobbled together a code which does what I want - that is to use a remote cell entry to update a specific page field cell in 4 pivot tables. I then use another remote entry to do the same to two secondary Page Field Cells in 2 of the 4 pivot tables.
However, if my remote cell has a number in it that IS NOT in the the pivot Page Field List then rather than breaking the code it simply overwrites (and therefore changes the value in the pivot table Page Field List) - disaster!!
My code is
Sub testflash()
Range("B15").Activate
Dim mycell As Integer
mycell = Range("b15").Value
Sheets("Dissection Table").Select
ActiveSheet.PivotTables("PivotTable21").PivotFields("Serial Number").CurrentPage = mycell
ActiveSheet.PivotTables("PivotTable22").PivotFields("Serial Number").CurrentPage = mycell
ActiveSheet.PivotTables("PivotTable23").PivotFields("Serial Number").CurrentPage = mycell
ActiveSheet.PivotTables("PivotTable24").PivotFields("Serial Number").CurrentPage = mycell
Application.Run "'KPI Mastercopy Data.xls'!testing"
End Sub
I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....
"123"
I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".
Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.
I am trying to use the AutoFilter/Custom function in Excel (it is available under the Data Menu). It offers me two conditions/criteria that I can apply using and/or. For eg:
Filter:
does not begin with - 3
and / or
does not begin with - 9.
I want to add a third 'and' criteria .. is it possible, and if so, how?
The column that I am trying to filter has numbers formatted as text.
Automating Data Filter Autofilter. i would like to automate the autofilter (from a form)...the following code works, but...it needs improvement...
myfilter = Range("d2").Value
Selection.Range("testmonth").Select
Selection.AutoFilter Field:=1, Criteria1:=myfilter
I am experinacing some difficulty in using the Autofilter in the attached sheet. The workbook consisits of the following sheets:
Main
Contains a button taht crates data for sheet "Working Data" by filtering and formating data found in Raw Data sheet. The code behind it ain't preetty but it worsk. Raw data
Just as the name implies
Working Data
Filter and formated raw data. After the VB code behind the button on sheet Main runs, I Insert an Autofilter on the coluimns of Working data. on column I ( Length ) I try and filter for rows were the value in column I is >= 35. Nothing shows up. I know this is wrong, just by inspection. I can ask for rows were column I is = 35 and get 1 rows. I can ask for rows were column I is = 45 and get 1 rows.
in fact I have Raw Data that comprises about 2000 rows but had to chop it down to meat board size req'ts:>
Once i identify the PivotField, how can i filter it to be > than Date?
View 2 Replies View Related1. I have 4 pivot tables on one sheet, all with the same page field (store name) and all relating to same data table.
If I change the store from the page field on one table, I want it to simultaneously change the other 3 tables to the same store.
2. I have a similar sheet which has charts instead of tables for which I wish to achieve the same thing.
I'm trying to filter and delete unwanted rows as I need row where dates is within a specified range.
How can I do this using AutoFilter? or are there any other alternatives?
using VBA I have a control sheet which summerises variouse counts & totals of data held on a detail sheet. Bu using filters and counting the visable rows.
Statistics on 50 columns of data held in several thousand (rows) mixed around eight business regionsheld in first column.
I could determin the number of affected rows by using Tick boxes on the control sheet and applying filters to the detail records
A) checkbox indicates if I need filtering on the type of data in my detail sheet and apply the filter
Selection.AutoFilter Field:=XX, Criteria1:="Y"
B) Because I could not have more than two criteria on an autofilter column I resorted to using Advanced Filter on the column with the Business UNIT's,
I Create a range write the criteria of the records to be filtered into the range, then apply an advanced filter using that range.
Both of these work well indevidually, but I am getting inconsistant results when I mix them
using the autofilter route I can select multiple tick boxes and the output is correct, and using the advanced filter I can select any combination of business units and the output is correct, however I cant get them to work together
if anyone knows some VBA code to filter on the next line down in an autofilter list.
My spreadsheet has a column with the names of people, which can appear multiple times in no particular order.
I have a macro that I run several times -- once for each individual in the column. The way that I currently do this is by manually using the autofilter on that column to select a person from the autofilter dropdown list. After I've manually filtered on a person, I click a button which runs the assigned macro. I then manually select the next person in the autofilter list, and click the macro button -- over and over until I've done this for everyone in the autofilter list.
I'd like to add some code at the end of my macro so that the macro ends by automatically filtering on the next person (line) in the autofilter list.
I have two fields where users enter a security identifier (cell P1) and the declaration date (cell P2) and i'd like to be able to pull all the records from the master table (A1:K10) where the security id matches (column H) and the request date (column C) is <= the declaration date (i've attached a sample file for your reference). I tried using a pivot table but it doesn't let me filter for "less than or equal to" values for the request date.
View 2 Replies View RelatedI have a problem that I'm sure requires the most elementary fix. I have exhausted google on this. All I need is a drop down list for each value field. See picture attached.
View 1 Replies View RelatedI am trying to filter a pivot by one of its pivot field through label filter by referencing a cell with defined name within same workbook. Defined name is updated by selecting a value from list of names. As a result, I would like to have the pivot display results where pivot field contains the selected name.
Sub NameFilter()
'
' NameFilter Macro
'
ActiveSheet.PivotTables("PivotTable1").PivotFields("Lead Name").PivotFilters.Add _
Type:=xlCaptionContains, Value1:=[Name]
End Sub
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
I have a worksheet ("VillageReport") that contains several pivot tables. All tables are from the same data source and all pivot tables have "Location" as the first column field. I would like for the tables on this sheet to automatically be filtered when I select a village name from a drop down menu in a cell on this worksheet (C1). So, for example, when I select "Tarzana" in C1, the location field of all pivot tables on this sheet will show only Tarzana (all others are deselected).
a Macro for this? (I have already set up the drop down menu in C1). I have found some examples online but can't seem to adjust the code to fit my workbook. I am not very familiar with VBA.
I'm currently using the following:
[Code] .........
However, i'd like it select the field ie 2-17 based on a year in a cell on another sheet "x" in cell E3.
At the moment i have a row of numbers 1-17 above the corresponding field cell so for example the number 15 is attached to the year 2013 (although this is dynamic).
I just cant work out how to get the autofilter to select the number that matches the cell in "x" E3 with the same value in T2:AJ2 on filter sheet and then filter the column that matches.
I often use the same file/pivot table for both month and weekly reporting. In my source data my field headers show 1,2,3,4..etc. This way I can use for month or weekly. But I often change the "Custom" name on the Field Value Settings to something more descriptive like "Jan" or "Week1"
The problem is that each time I update the the "Custom" name the Pivot Table auto refreshes and it takes forever to re-label all the columns.
Is there a way to suppress this refresh when updating the Custom Field Name?
Capture.JPG
