Dropbox - Final.xlsm
Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
I have many customers particulars and data coming in everyday. How i do create a code such that with one click i'll be able to update my worksheet in Excel without typing in manually?
View 10 Replies View RelatedI have exported a report out of Quickbooks with all my customers that have done business with us from 2005-2008. I want to be able to delete the customers from the worksheet that have done any business in 2008. So that I am left with a list of customers that have not done any business with us in 2008. Can a formula or macro do this for me. I don't just want to delete the rows that contain any dates in 2008, but delete the customer as a whole from the workbook.
TypeDateNumMemoNameItem@Home RealtyInvoice10/20/200522813BIC Clic Stic Black Barrel Red Trim White and Red Imprint Black Ink Medium Point@Home RealtyCSInvoice10/20/200522813Printing an additional color on the merchandise@Home RealtyADDCOLORInvoice10/20/200522813Shipping & Handling@Home RealtyShippingInvoice12/01/2005FC 2058Finance Charges on Overdue Balance@Home RealtyFin ChgInvoice07/18/200730753Silkscreen add web address to shirts@Home RealtySilkscreenInvoice07/18/200730753Silkscreening Set-up fee@Home RealtySet-upTotal @Home Realty1 Source ManufacturingInvoice08/16/2007311575-11/16"x7/16", Reversible, Standard Blade, Phillips Blade, Magnet Top, Nickel Plated, Heat Trea...1 Source Manufacturing8809Invoice08/16/200731157Set-up for Printing Plate1 Source ManufacturingPlate ChargeInvoice08/16/200731157UPS Ground Shipping & Handling1 Source ManufacturingShippingInvoice10/25/2007318755-11/16"x7/16", Reversible, Standard Blade, Phillips Blade, Magnet Top, Nickel Plated, Heat Trea...1 Source Manufacturing8809Invoice10/25/2007318755-11/16"x7/16", Reversible, Standard Blade, Phillips Blade, Magnet Top, Nickel Plated, Heat Trea...1 Source Manufacturing8809Invoice10/25/200731875Set-up for Printing Plate1 Source ManufacturingPlate ChargeInvoice10/25/200731875Shipping & Handling1 Source ManufacturingShippingInvoice07/08/2008343575-11/16"x7/16", Reversible, Standard Blade, Phillips Blade, Magnet Top, Nickel Plated, Heat Trea...1 Source Manufacturing8809Invoice07/08/200834357Shipping & Handling1 Source ManufacturingShippingTotal 1 Source Manufacturing
Using Excel 2003 and cannot copy a worksheet and am getting this error:
File not found: CDocumentTempVB4B.tmp
I have 8 Sheets in my worksheet with orders from my customers. Column C is their PO# and Column M is the Status of the order. What im looking to do is set up a summary sheet with the List of 8 customers that tells me what PO#'s are in a particular status.
I need a formula to list all PO's that are in "Fabricating" or "Completed" Statuses.
I have gotten this far:
=if(Sheet1!M25="Fabricating",Sheet1!C25,if(Sheet1!M25="Completed",Sheet1!C25,"None"
which works perfectly for the individual rows, but i need it to do it for all rows (1-2500). If i do Sheet1!M2:M2500, i loose it.
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I've got a spreadsheet with 2 worksheets in it.
On the first one we've got:
Name of the agent | petition REf num | Task
Each petition can generate several tasks, one line per task.
John Doe | XXXX-YYYY | NCO
John Doe | | RIL
John Doe | XERT-WWWW | RMT
Jane Doe | QSZE-AQWC | RIL
On the second worksheet:
Complete list of agents | number of petitions | Status
John Doe | 2 | OK
Jane Doe | 1 | [BLANK]
I want to be able to fill in the second worksheet automatically. For each agent in my worksheet 2, I want to check if they appear in worksheet 1 and if so count the number of petitions related.
I don't know where to start
I am copying data from worksheet "Microsoft" to another workbook and paste in sheet1, i want the cell G1 to auto input the worksheet name "Microsoft" where i copy the data from,
How to have G1 show the worksheet name after i copy and paste the data from worksheet name "Microsoft".
I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
View 5 Replies View RelatedEach month I get a report that is formatted by the customers and this sheet never changes. The problem is that the master sheet my job uses is not formatted this way. The master workbook has several sheets that breaks down the data from the monthly sheet. Instead of having to enter the data manually I'm looking for a way to export the data from the monthly sheets into the master workbook. As I stated the sheets are all the same but come from different providers and all contain the same amount/style of data.
View 1 Replies View RelatedI have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
I have two sheets in one workbook; one has a list of names in column A (136 of them) and another is a master list with all the names of people who work for the company (over 2000). Sheet 1 and Sheet 2 respectively. I need to populate columns B-E in Sheet 1 with the data in columns B-E in Sheet 2, but only for the names that match in column A. I've tried applying filters but can't get to the data I need for some reason. The names are formatted the same way in both sheets (Last, First). In Sheet 2 the names are links but in Sheet 1 they aren't; not sure if that's important.
View 7 Replies View RelatedI would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
transferring data from a worksheet (Passdown Report) to another worksheet (Data Base) located in the same workbook. In the source worksheet (Passdown Report) there are 2 cells (B2 and D2) in which I would like the data to be transferred along with the data from B4 to AQ33. All the cells contain a formula which I want to stay after the information is transferred to the target worksheet (Data Base). This will be a daily transfer to the target worksheet (Data Base), so the macros should also identify the next available open row to transfer the data to.
View 1 Replies View RelatedHere is the situation:
On Sheet1:
A
123
456
789
On Sheet2:
D, G
aaa123, 11
bbb456, 22
ccc789, 33
I would like the function to search strings within an array on Sheet2 for a value on Sheet1 (that is, to search for 123 within the strings aaa123, bbb456, ccc789,etc.). Once a match is found, I would like the function to return another value from the same row on Sheet2 that contains the value from Sheet1 (within the string).
Can you help me?
I must use cell references for the values on Sheet1 because I am working with thousands of unique supplier numbers. In addition, all cell formats are general. I prefer to use the INDEX(MATCH combination rather than the VLOOKUP option.
I receive a monthly download of individuals call-logs in one "Master File." For internal reasons, I need to separate every person's monthly call-log into individual worksheets. Unfortunately, the file is very large and copy/paste is very time consuming. I am operating on MS Excel 2007.
View 9 Replies View RelatedI have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I have a two identical worksheets in the same workbook with two tabs (Search, Database). The Search worksheet contains a search engine at the top which searches by column, and pulls rows from the Database tab, which match the search queries. However, the rows that are pulled up in the Search tab cannot be edited as they are all MATCH formulas. Only the rows in the Database worksheet can be edited.
This can be quite problematic if I am searching a row to edit it. Although the search engine is convenient enough and faster than filtering (as I have over 20 columns), when the row comes up, I cannot edit it. I have to go to the Database sheet and filter through until I find that row, and THEN edit it. What I require is that when I search for something and the matching rows get pulled up, I want to be able to click a button which will take me to those rows in the Database sheet.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....
I have an excel 2007 work book with multiple worksheets that updates daily. I want to bring all the data from each of the work sheets into a new worksheet so that i can create a pivot table.
All the data in the worksheets have the same headings and correspond to the days of the year.
I think i need to use some sort of range look up?
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I'm trying to consolidate data from many worksheet to a master worksheet. So far, thanks to the help of some experts, i've got this code. But i need to tweak it further to suit my requirements.
Sub CopyDataToConsol()
Dim Sht1 As Worksheet
Dim Sht2 As Worksheet
Dim SrcRg As Range
How can i tweak the above code to:
1) copy the lastest updated row to the Master sheet, instead of copying the whole set of data over and over again..
2) automate it by using worksheet change?
I use a web query to import into an excel workbook. As data is changed on the web that the query runs against, I would like the name of the sheet that is being imported into to change to one of the cells that is being imported.
View 9 Replies View RelatedAs I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions.
2) The To Dos for each project are NOT arrange in sequence by dates.
3) Number of project will increase over time, therefore the number of worksheets will also increase.
I need a macro that will ask for a crew # and then select all the rows off another worksheet that contains that crew #. Then take the selected rows and copy them to the active worksheet for reporting.
Possible?
What I need , is a macro to take data entered from "worksheet1" and fill in next row on a separate worksheet based upon salesman selected from cell C20 in "worksheet1" .
For the sample, I have just 3 saleman in a dropdown list and have labeled worksheets accordingly. If i could get help with say just using info from cells C6,c7 and e6 from "worksheet1" and put it where it goes.
c6 last name is row b on data sheet
c7 first name is row c
e6 trade year is row o
I should be able to work out the rest.
I have one worksheet called WEEKS.xls which lists weeks 1 to 8, week1 being columns A,B,C, week2 being D,E,F, and so on up to week 8
I have another work sheet called supplier.xls which is a worksheet imported from a database. In this worksheet I have columns A to Q. I am only interested in the data in columns C, P & Q.
I have buttons along the top in the WEEKS.xls sheet, one for eack week. On week one when the button is clicked I would like a macro that would look in folder “Supplier Stock” for the worksheet suppliers.xls and then take the data from columns C,P,Q and paste them into the WEEKS.xls in columns A,B,C. On week 2 the data will be pasted into D,E,F and so on. On the supplier.xls there is a few gaps down the sheet , like row 15 & 16 and alo 19 & 20 if possible I don’t want the gaps in the WEEKS.xls. Also on column P it is a date format I would like that pasted into the WEEKS.XLS in a dd/mm/yy format
I have added both sheets to show you what I mean