I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
View 5 RepliesIn cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View RelatedWhat I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
2 Woksheet Change Events? I have a question similar to one that was posted about 2 worksheet change events which I found out is not possible and so I have to merge the codes together and I don't know how. I'm facing a problem in the advanced filter when I remove the last item to be filtered and takes forever to calculate.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Address = "$F$2" Or _
Target.Address = "$F$3" Or _
Target.Address = "$F$4" Or _
Target.Address = "$F$5" Or _
Target.Address = "$F$6" Or _
Target.Address = "$F$7" Or _
Target.Address = "$F$8" Or _
Target.Address = "$F$9" Then
Range("Database").AdvancedFilter _
Action:=xlFilterInPlace, _
CriteriaRange:=Range("Criteria"), Unique:=False
Exit Sub
End If
If Target.Column = 3 Then
If Target.Value = "YES" Then........................
I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.
For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.
VB:
If Target.Column = 1 Then
If Target.Column = 2 Then
If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then
If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then
If Target.Value = "X" And Target.Value = "Active" Then
I am trying to have multiple change events work in one worksheet and can not get it to work at all.
The simple setup is, I have a column for each month of the year.
I have several rows of numbers beneath each monthly column.
What I want to do is if I enter a date in say January (my change field), I want it to "ClearContents" out all of the data in the August column.
This works fine currently.
But say the next month I enter a date in February, I want to "ClearContents" in the September column. And so on for each month.
My various attempts at this does not recognize the second change agent, so nothing occurs.
Should I try to "call" each section, or use "Else If", or some other idea?
I've tried attaching the worksheet in case that helps to see what I am attempting.
There are extra "items" on the side and below the table that will be removed if I get this "change event" working. So this worksheet is a rough draft so far.
I use VBA's WorkSheet_Calculate event to detect when a cell of particular interest calculates to a specified value. It works well as long as there is only one worksheet (tab). However, when I duplicate that tab (and the final app could have up to 10 copies) to run a different set of data concurrently, I get bad results. The data is online, real time trading data, with each selected stock being tracked in a different tab.
Apparently both (or all) tabs in the workbook react to the same event, whereas I would assume that the event routine in each tab would react only to a calculation in that tab. If this is in fact the case, is there a way to a) make the event routine in each tab respond only to a calculation in that tab, or b) upon a calc event anywhere, determine which tab it occurred in?
Here is the present event code; right now it reads exactly the same in every tab. As long as nothing is happening in any other tab, it does its job correctly.
I realize that it’s not possible to have on one sheet, multiple Worksheet Change Events, so I tried to come up with an alternative method of handling it, but quickly realized that it’s beyond my capabilities at this time.
I would like to set up a worksheet change event on each of a number of identical sheets. Each Change Event will run exactly the same macro. The exception is the “DeptStr” string value that is relevant to the sheet calling the macro .
Each sheet will be a different department.•If the Target in either range has data added, then data will be added to the cell offset one column to it’s right.
•If the Target in either range has data cleared, then data will be cleared in the cell offset one column to it’s right.
•There can only be one sheet active at a time.
•Only one sheet has data entered at a time.
•The two non-contiguous ranges are of equal length. Ex. (C3:C52) and (E3:E52) and are uniquely named in this case,
but they are not a necessary requirement in order to solve this problem if there is a more practical method.
If a cell in some parts of the worksheet (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo in the code) are selected the input (4 digits) should be converted into time (00:00).
Cells in some other parts (Util,Assis) require 6 digits and should be converted into time (00:00:00).
I had the code working in seperate worksheets but combined (as is shown in code bellow) only part of it works.
Only the input entered into the 4 digit part (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo) is converted correctly.
The input in the other parts (Util,Assis) is not converted (so when 800 is entered I do not get 00:08:00 but I get the hour equivalent of 8 days (19200:00:00) and logically the message from the EndMacro "You did not enter a valid time".
The cell formats are correct [u]:mm and [u]:mm:ss.
To me it looks like it does not jump to the 6 digits part when need but I can't figure why.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim TimeStr As String
On Error GoTo EndMacro
If Application.Intersect(Target, Range("SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo,Util,Assis")) Is Nothing Then
Exit Sub
End If
If Target.Cells.Count > 1 Then..........................
I have a previously working _chnage event that I am now trying to nest a similar event in. Neither event works now. What am I doing wrong?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim refrange
If Target.Address(0, 0) "C55,G107" Then Exit Sub
refrange = [MATCH(C55,lst_AgentType,0)]
With Sheets("NewInput").Range("d63:r63")
If refrange = 1 Then
.NumberFormat = "#,##0"
ElseIf refrange = 2 Then
.NumberFormat = "#,##0.00"
Else
.NumberFormat = "0.00%"
End If
End With
If Target.Address(0, 0) = "G107" Then
refrange = [MATCH(G107,lstCommRev,0)]
With Sheets("NewInput").Range("E107")
If refrange = 1 Then
.NumberFormat = "#,##0.00"
Else
.NumberFormat = "0.00%"
End If
End With
End If
End Sub
I have a workbook with 4 sheets "Sheet1","sheet2","sheet3" and "sheet4". There is a macro "execute" in "sheet4". How to use the worksheet events, so that if anything on "sheet1", "sheet2" or "sheet3" changes, the macro "execute" in "sheet4" is excuted.
View 5 Replies View RelatedI have 2 codes that I'd like to run on the same worksheet, but i don't know how to paste them in together. This may happen many times in the future, so I'd like to know what rules to follow or how to configure 2 codes such as this to get them to work. For example, here's 2 codes I need ran on the same worksheet and I tried pasting one after the other and it won't let me do both.
View 2 Replies View Relatedlook for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedI would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies View RelatedI have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies View Related*My original workbook consists of 3 worksheets lets call them (W1,W2,W3)
*I am copying W2 in a new book and pasting content of W1 via a macro.
*But if i am to run this macro more then once it doesn't work as the name of the new workbook is different.
see script below:
I have a workbook with two worksheets - Catalogue Request Summary (CRS) and Presentation Server Types (PST). The PST page is basically a form with validated entry fields, hence the information is updated constantly. The CRS is a summary tablised version of the information in the PST page.
I have setup a macro which copies across the information from the PST sheet and pastes into the CRS sheet. The problem is that when the macro is run, it over-writes the information instead of pasting the new data into the next row.
So basically I need the macro so that will copy any new information to a new row in the CRS page whenever new information has been added to the PST page the the button clicked.
I know it would be a lot easier if there was an attachment but there doesnt seem to be the option. Please pm your email address so I can send it through.
Edit - I have uploaded the file to an online storage site if anyone wants to download it. Link:http://www.4shared.com/file/91957046...ue_Test_a.html
I need to come up with a macro code to copy 2 worksheet from 2 workbooks to my current workbook. I do not know what is the code such that i can copy different worksheets from other workbooks to a currently opened workbook.
Below is the scenerio i want to achieve:
worksheet1 from workbook1 need to be copied and paste as a worksheet in workbook3. worksheet1 from workbook2 need to be copied and paste as a worksheet in workbook3. workbooks will eventually contain 2 worksheets which are from workbook1 & 2.
I have one worksheet called WEEKS.xls which lists weeks 1 to 8, week1 being columns A,B,C, week2 being D,E,F, and so on up to week 8
I have another work sheet called supplier.xls which is a worksheet imported from a database. In this worksheet I have columns A to Q. I am only interested in the data in columns C, P & Q.
I have buttons along the top in the WEEKS.xls sheet, one for eack week. On week one when the button is clicked I would like a macro that would look in folder “Supplier Stock” for the worksheet suppliers.xls and then take the data from columns C,P,Q and paste them into the WEEKS.xls in columns A,B,C. On week 2 the data will be pasted into D,E,F and so on. On the supplier.xls there is a few gaps down the sheet , like row 15 & 16 and alo 19 & 20 if possible I don’t want the gaps in the WEEKS.xls. Also on column P it is a date format I would like that pasted into the WEEKS.XLS in a dd/mm/yy format
I have added both sheets to show you what I mean
I have a Workbook with around 10 worksheets on, each worksheet is a form.
And when one form is completed we have to save a backup. So i want to assign a macro to a button on a worksheet so when clicked it will save a copy of that worksheet ONLY to a destination and not all the other worksheets along with it.
if it is possible, and how to go about it.
Copy worksheets from many workbooks to one Master workbook, which will be used to aggregate the data. I need a macro to do this, which will automatically name the worksheet it creates (using information from one of the cells).
The second part of my problem is that it needs to be smart enough to recognise if the worksheet that is being copied, has previously been copied to the master. If it has, it should overwrite the original worksheet rather than create a new one.
I need to come up with a macro code to copy 2 worksheet from 2 workbooks to my current workbook. I do not know what is the code such that i can copy different worksheets from other workbooks to a currently opened workbook.
Below is the scenerio i want to achieve:
worksheet1 from workbook1 need to be copied and paste as a worksheet in workbook3.
worksheet1 from workbook2 need to be copied and paste as a worksheet in workbook3.
workbooks will eventually contain 2 worksheets which are from workbook1 & 2.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....