Copy And Paste Selection Macro Into New Worksheet Keeps Overwriting The Previous Data
Sep 19, 2012
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB:
Sub CopyRow()
Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
End Sub
View 9 Replies
ADVERTISEMENT
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
May 9, 2013
I have amended the code below and have got it working. The problem I have now is that every time it loops it overwrites the data it wrote the previous loop
Offending line being ActiveSheet. Range ("A1: D30") = ValuesArray
I have known that somehow it should remember the last row and copy below this one but I cannot get it to work
Code:
Sub Basic_Example_1()
Dim MyPath As String, FilesInPath As String
Dim MyFiles() As String
Dim SourceRcount As Long, Fnum As Long
Dim mybook As Workbook, BaseWks As Worksheet
Dim sourceRange As Range, destrange As Range
[Code] ..........
View 1 Replies
View Related
Sep 5, 2013
- Construct a macro to import a csv-file to my worksheet named "Info". The data in the .csv-file should start in row A5 in my worksheet.
- If the worksheet "Info" already has data, I want to overwrite the existing data with the new data starting in row A5
The directory of the csv-file is C:Testmycsvfile.csv
View 3 Replies
View Related
Mar 15, 2013
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB:
Sub CopyB2()
lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row
lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1
Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3)
End Sub
View 1 Replies
View Related
Aug 15, 2012
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies
View Related
Jul 7, 2009
Copy paste macro that I'm using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.
View 9 Replies
View Related
May 24, 2013
Simple loop macro.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab.
2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up).
3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C).
4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case).
5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
View 9 Replies
View Related
Jul 7, 2009
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
View 9 Replies
View Related
Apr 25, 2014
I need a code that will copy any cells with data in range I3:I41 from sheet2 and paste it in sheet1 starting at cell B3. Then copy any cells with data in range I3:I41 from sheet3 and paste it in sheet1 starting at the next empty cell.
View 9 Replies
View Related
Jul 1, 2007
I am working on a project where all columns but Column A are locked. The user selects a row of data by selecting the one unlocked cell in that row. This gives him access to modifying the contents and position of that row via a UserForm. My question is: Is there a way to copy the row of data to another sheet automatically when the user changes his selection? In this environment, a change of selection means that the user is done with one row of data and initiating work on another row. What I am trying to accomplish is a procedure invoked by the Worksheet_SelectionChange event that references the cell that has just been de-selected.
View 3 Replies
View Related
Sep 6, 2007
I have created a toolbar that has "Previous Worksheet" and "Next Worksheet" buttons on it with the following macros assigned:
Sub NextSheet()
On Error Resume Next
If ActiveSheet. Name = "Problem Listing" Then
MsgBox "This is the last worksheet."
Else
ActiveSheet.Next.Select
End If
End Sub
Sub PreviousSheet()
On Error Resume Next
If ActiveSheet.Index = 1 Then
MsgBox "This is the first worksheet."
Else
ActiveSheet.Previous.Select
End If
End Sub
This seems really simple but the code crashes after 4 or 5 repeated clicks of the button.
View 4 Replies
View Related
Jan 19, 2008
I need to create a macro that will insert copied cells(cell range) from the clipboard into a cell on a different workbook and "shift cells down". The cell range in the clipboard will always be different and the position of the cell I select to insert the data into will also vary.
View 4 Replies
View Related
Apr 21, 2012
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
View 1 Replies
View Related
Jan 30, 2007
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
View 9 Replies
View Related
Aug 11, 2014
I have a large spreadsheet which I have extracted the data I need, but I am now having a problem tiding it up.
To simplify. I have 2 columns, both containing data formatted as text, each column has some data, but on different rows.
I need to merge the 2 columns without overwriting the data on the second column, with blank data from the first column, and without the column shrinking or growing.
Here is a section of my spreadsheet that needs merging : Excel-1.PNG
I have tried copy > Paste Special > Skip Blanks, but it just copies the column to the other - no merging.
View 1 Replies
View Related
Nov 15, 2011
I have a large set of data that I need to use for data validation in drop down lists. The data is arranged in 4 columns and entries within each column may repeat numerous times. The four columns are as this..
Category Subcategory 1 Subcategory2 Subcategory3
The first data validation will come from the first column. Once this is chosen the second drop down should populate with the subcategory that correspond to that category stored in column 2. once that is chosen the thrid data validation should populate with the corresponding subcategory from column three etc.. This is a small sample of the data in the columns.
View 5 Replies
View Related
Jan 16, 2014
I am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
View 6 Replies
View Related
Aug 7, 2014
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
View 5 Replies
View Related
Nov 27, 2013
I am using the following macro which copy and paste certain info from one sheet to another. The macro I am using is
Code:
Sub test()
With Sheets("Invoice")
.Range("A4:C17").Copy
Sheets("Transactions").Range("b" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
End With
End Sub
Is it possible to copy the value of B2 in the sheet (Invoice) as well and paste it for as many entries there are in the rows 4:17 in the sheet "Transactions". For example say i have items in row 4:10 when it copies the info to the sheet Transactions then it must copy the entry that is in B2 on sheet Invoice also in column a 4:10.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Feb 17, 2014
I have a worksheet that has macro events attached to command buttons. When a ‘Start’ command button is clicked, a timer begins counting in seconds and displays the value in cell B3 until a ‘Stop’ command button is clicked. The event works flawlessly as long as I don’t open up another workbook (to continue working in Excel).
When the second workbook is open…then time stops working in the workbook where the macro was created…and starts displaying the ‘timer count in seconds’ in the new active workbook--which overwrites/destroys the data in the newly opened workbook. When I go back to the original book that called the macro…it continues counting again.
I need this timer to continue running in the workbook with the command buttons (in the background) while I work on other worksheets in other books. Is there a way to keep the timer running no matter how many other workbooks are opened and prevent it from overwriting whatever sheet is active? This code in the Increment Sub below ‘overwrites’ the contents of cell B3 on whatever sheet is active---and stops the timer in the on the sheet with the ‘Start’ command button.
View 1 Replies
View Related
Jun 2, 2008
can excel do this (see the attachment pls). if possible can someone show me how to do that. i am new in excel vba.
View 9 Replies
View Related
Jul 2, 2009
I have a command button that I want to automatically copy and paste certain data to another worksheet when clicked. I keep getting a "runtime error 1004; application-defined or object-defined error". The code I have so far is:
View 5 Replies
View Related
Feb 29, 2012
I need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA()
Dim rcnt As Variant, i As Long, j As Long
rcnt = Range("A" & Rows.Count).End(xlUp).Row
j = 4
For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
View 1 Replies
View Related
May 28, 2009
I have two worksheets 1) PL dbase and 2) Waiting list. Both setup as Lists. Where Excel automatically inserts a new row as you click in the current rows...
I want to autofilter Waiting list column I for the value of "Yes"
Copy all the data autofiltered in Waiting list to the next available row(s) on worksheet PL dbase.
View 10 Replies
View Related
May 27, 2014
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies
View Related
Dec 4, 2012
I'm trying to copy certain cells to a new worksheet that keeps a track of previous entries via date and name and location.
The code works somewhat, however the values are not pasted into the respective worksheet. I'll try to explain the code as I see it.
Sub Button2_Click()
So the first section Activates the sheet that data is entered
Sheets("Checks").Select
Sheets("Checks").Activate
ActiveSheet.Unprotect ("fizix")
If the value ST is found in the sheet, the code knows to paste values to another worksheet known as ST_Hist
[Code] ........
Here I have another macro that then deletes the data in the selected ranges denoted by "" or ":", this part of the code works, however I dont have my pasted values in the appropriate sheet!!
Sub ClearAll()
Sheets("Checks").Select
Sheets("Checks").Activate
ActiveSheet.Unprotect ("fizix")
Sheets("Checks").Range("C2:C4").ClearContents
[Code] ........
View 1 Replies
View Related
Aug 20, 2014
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
View 5 Replies
View Related
Aug 15, 2008
I have a workbook that has a master data sheet which is used daily to import data. I also have worksheets named: 1, 2, 3, etc. based on the day of the month.
I have been manually pasted the master data for a particular day onto that corresponding numbered worksheet.
I was thinking of taking the date and and separating it using the deliminated feature then somehow looking at the day of the month and tell it to paste to that same worksheet number.
View 9 Replies
View Related
