I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Repliesneed to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
I would like to fill the empty rows with value from the row before them that has a value.
row 1 has a value "a"
and row 2-5 has no values
row 6 has "b"
then row 7 has no value etc...
i would like help getting row 2-5 filled with a, and row 7 filled with b and any subsequent rows that may have a value
regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
I'd like to have a sheet with multiple columns of data (say A thru K for instance.). Id like to reserve column A for ONLY imputing an X. The rest of the columns b-K would have data in the cells. I'd like to have a macro that when it saw an X in column A, would copy all of the data in cells B-K in that row, paste it into the next empty row of a second sheet (for history tracking), then go back to the original sheet and continue looking for additional "X"'s and repeat. Once all of the X's were copied, it would "clear" (Not delete because some of the cells would have formulas in them that would need to remain for future use.) the cells based on the "X" then finally move all of the remaining data up to the empty rows to fill in the empty rows. This last piece would be more for esthetics to have a clean looking sheet.
View 1 Replies View RelatedI want to create a macro that will cut and paste a worksheet out of an existing workbook and tidy up the table by removing all rows where there is no value in one of the fields (product or part number for example).
View 8 Replies View RelatedI have a formula that does exactly what I need , it fetches negative stocks from sheet 1 , but the formula places the data exactly on the same row where the negative is , thus there are a lot of in between data not required , Yes I can copy paste special values and remove blank rows , but the macro will do it faster
View 13 Replies View RelatedUsing the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
In my excel I'm copying rows upon specific criteria to another tab.
The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)
Im looking for a macro that hide empty rows. I found some simple macro but that are long to execute. While looking for a faster code, I found two codes that work pretty fast. But as I don't understand VBA I am not able to adjust them to my situation.
First macro: I am able to specify my range (B6:B77), but the macro applies to blank cells and I need to apply to "" cells.
[Code] .....
Second macro: very fast as well. Here, it applies to "" cells, but I am unable to specify a range. So the rows 1 to 4, which are empty, are hidden but should not.
[Code] .....
How do I have the marco delete rows if the O column = a certain cell.
For instance my O column has a bunch of colors
Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".
I'm trying to create a macro to delete all empty rows but only if they are a certain row height. I currently have a macro that looks to the first cell and if it's empty, then it deletes the entire row. The only problem is that I would like to keep the shorter, empty rows to maintain my desired formatting. I will post the code I have if I can figure out how to do it properly and not violate the forum rules.
[code]
Sub DeleteEmptyRows()
'Cell A above and below each header contains white and gray text to maintain formatting when deleting empty rows'
Dim i As Long, LastRow As Long
LastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row[code]......
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
I created a macro that analyzes some datasets and according to different parameters it puts an X at the side of every cell that goes out of parameters. These Xs are all in columns named the same way for it to be easier to find. What I want to do is to write some macro that will hide every row where the data did not go out of parameters to be able to easily see where it did. In the following example it would need to hide the second row since there are no Xs in that row. One of the problems I'm having is that the amount of columns and rows is variable.
Data
Data
Functional Upset
Data
Data
Functional Upset
#
#
X
#
#
[Code] .......
Below is the piece of code that I created to try to do this (G has the value for the amount of rows). I think it is working but it is either taking too long since it has to sometimes go through over 20k lines as much times as it needs to to cover all the rows that contain Xs or its getting stuck for some reason.
Code:
Worksheets(2).Range("I3:I" & G).EntireRow.Hidden = True
K = 0
Do Until Worksheets(2).Range("I1").Offset(0, K) = ""
If Worksheets(2).Range("I1").Offset(0, K) = "Functional Upset" Then
[Code] ......
dear friend in my document column "L" has some numbers & formulas.if any cell has formula base in that i need to inset rows below that formula cell & that formula need to spread on that new rows.i have 4 type of formulas.each formula has (1.5).that part is common. it 's like this...
(01.)ex- L1 cell =150*2*1.5 ,need to inset one row below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
(02.)ex- L1 cell =150*2*1.5+50*1.5 ,need to inset two rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =50*1.5
(03.)ex- L1 cell =150*2*1.5+130*3*1.5 ,need to inset four rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
(04.)ex- L1 cell =150*2*1.5+130*3*1.5+20*1.5 ,need to inset five rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
L6 cell =20*1.5
removing empty rows from my set of data.
I have a big set of data that I'm copying and pasting into excel. When I paste it there are 2 empty rows between each line of data. I want to remove these empty rows, without affecting the data. I tried 'Go to special...' and deleting all empty cells and stuff but I couldn't get it to work. The problem is that there are blank cells in some of the rows that I want to keep. When I try to remove the blank rows, I also end up removing rows of data that I want to keep.
I've made an example for you to try and explain it better - attached.
remove all of the rows that are completely empty, but leave any row that has any data in it (at any point), that would be awesome!
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
See here Fill Cells.xlsx
I am processing an infinite set of data from a meteorological station here in Alaska which gives me half hourly data reading with a time stamp 00.00, 00.30, 01.00, 01.30, 02.00, 02.30 and so on.
I am using this formula to detect every time half hour reading is skipped (=IF(TEXT(MOD(B1936-B1934,1),"[M]")="30","","missing")) and it works pretty well.
Still I have to check and manually insert extra missing for every half hour missing but that's bearable.
This formula inserts a "missing" every time it finds a gap.
My question is: How can I insert a row above every cell with "missing"?
How do I do that? Here is also my excel sheet.
CR1000_Meteo_20131113_2_CLEANED.xls
I am writing regarding the Pivot table creation with data which contains empty rows.
Recently, I work on a project with a data which contains empty rows. I will attach the file for sample to see what sort of data contains my sheet.
As you can see the data is divided according to some criteria, and it is constantly updated by users. sometimes a new criteria is added at the end of the sheet, that is why I need to create a pivot table, to be able to just changing Source, to update the table and manipulate table in order to get desired results, but I can't remove these empty rows rom the data as far as some unexperienced users have to fill the information and it is more comfortable to have the data separated from each other for them.
However, when creating the Pivot table on this type of data, the pivot table will include the blanks Row Labels there.
I have a table = Columns A - E contain data in a variety of formats
Code1
Code2
Code3
Code 4
Code 5
Code6
dog
9
12/1/1987
hamster
dog,9,,12/1/1987,hamster
What Column F (code 6) should contain is a csv of Columns A-E as shown.
What formula for Column F will automatically fill the values for all data within a row in a csv?
(Excel 2010): Hide row if cell C in this row is empty.
I've just started using macros and I'm sure there is one for this problem.
I have a table into which I paste values to ColumnA. The other columns have formulas. The number of values to be pasted varies. When the number being pasted this time is less than the number pasted last time, empty rows remain above the valid data after sorting, which is undesirable. I want to get rid of those rows just before (or after?) pasting the new values. The way I see it is I want to delete all but the first data row of the table so the formulas remain untouched in the first row. Then, as new values are pasted the formulas replicate automatically.
Sample file is attached : Sample.xlsm
The spreadsheet I am working in has $ which I need to total. The information, or rows, can vary from day to day so there is no static place to have a cell with an @sum. Management wants me to add a pretty line that says
'Total' in one cell and the $ next to it. I have about 30 sheets with columns to total. Yuck, takes forever.
How do all of you total if you don't know the last row? At the top?
I thought it might work to put an @Sum in the last row of the spreadsheet, in the column
I need to total, and having a VB code to delete empty rows. That would be automatic.
formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
I want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
I am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.
I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells: