Macro To Hide Fomula In Cell
Jul 27, 2014How to hide formula in excel, that the user cannot be seen nor edit the cell with formula.
View 3 Replies
ADVERTISEMENT
Copy One Cell Fomula To Another
Feb 15, 2009I would like to copy one cell formula to another but i would like the constant to remain intact. When i pull it over to another cell there is an incremental effect.
from:
=SUM(LEN(B9:B300)-LEN(SUBSTITUTE(B9:B300,B4&","&D8,"")))/(LEN(B4&","&D8))
to
=SUM(LEN(B9:B300)-LEN(SUBSTITUTE(B9:B300,B5&","&D8,"")))/(LEN(B5&","&D8))
But i want it to be either
=SUM(LEN(B9:B300)-LEN(SUBSTITUTE(B9:B300,B4&","&D8,"")))/(LEN(B4&","&D8))
or better still simple increment just value
=SUM(LEN(B9:B300)-LEN(SUBSTITUTE(B9:B300,B4&","&D9,"")))/(LEN(B4&","&D9))
Rolling Sum Fomula
Aug 13, 2009I need a formula to give me a ROLLING SUM of the last 12 entries in a column, to give a rolling year sum.
Each month a new number would be added to the column at the end just before the rolling sum calculation.
The formula then would sum the new entry plus the preceding 11 entries.
E.g. Cell values as follows: A1=10, A2=6, A3=3, A4=9, A5=4, A6=5, A7=13, A8=2, A9=7, A10=1, A11=14, A12=5
Say the sum is in cell A13, the sum=79.
A row is inserted above A13 and 7 is entered.
Now the sum calculation is in cell A14 and the calculation is from A2:A13 which equals 76.
Fomula To Calculate The Date
Oct 28, 2008I have a sheet with dates in this format: 20080910. 1st: I tried to change the date format & tried most of formats but wasn't able to change it to become something like this: 05/22/08. Then what I need is to create a formula to calculate how many years till today has passed since that day.
View 5 Replies View RelatedFomula To Calculate Supply Vs Demand - Stock
Sep 3, 2008I have a spreadsheet which uses MS Query to import data from our MRP System. This Spreadsheet has all new orders and qtys required per sales order etc. Each Part number may have several sales orders and different qtys for each. I am looking for help to write a fomula which looks the required qty`s for each sales order & part and check another sheet which has all the avaliable stock to sell on it and populate a column next to the qty req`d with what if anything is available.
Both the orders sheet and the stock sheet are MS Queries which refresh at a given interval so cells may change position.
Cutdown Example of Orders Sheet.
Sales Order No. ¦ Part ¦ Qty Req`d ¦
--------------------------------------
1234 ¦ Apple ¦ 12 ¦
6777 ¦ Apple ¦ 16 ¦
7989 ¦ Pear ¦ 4 ¦
cutdown Example of Stock Sheet.
Part ¦Qty in Stock ¦
----------------------
Apple ¦ 12 ¦
Pear ¦ 3 ¦
Now the fomula should bring back the following
Sales Order No. ¦ Part ¦ Qty Req`d ¦ Qty Avaliable ¦
----------------------------------------------------
1234 ¦ Apple ¦ 12 ¦ 12 ¦
6777 ¦ Apple ¦ 16 ¦ 0 ¦
7989 ¦ Pear ¦ 4 ¦ 3 ¦
Macro To Hide / Unhide On Cell
Oct 20, 2012 need to create a macro that will hide/unhide rows. I have a list of items that need to be completed and under each item is another list that explains how to complete the items on the first list.
Let’s say for example, How to bake a cake
I want rows 2 – 6 to be hidden when the file is opened and then unhide when A1 is clicked. Then hide again when A1 is clicked again.
I have a huge list of items that need to work in this format.
The other thing I need is when the document is printed all of the hidden items are printed.
Macro To Hide Rows If Cell Value Is Same?
Oct 23, 2013I Have Values in Cells A29 thru F45. I want to hide the entire row if the value in Column C is the same as the value in Column C in the row directly above, i.e, if the value in C30 is the same as C29, Row 30 should be hidden.
Based upon the logic built into the table values. if the value in C30 matched C29, all of the values from C30 thru C45 would match C29 with a need to hide all rows starting at Row 30 and then thru row 45. The values could begin repeating at Cell C31 with the value in C31 matching C30 with a need to hide from row 31 thru 45.
I am thinkin a Selection.AutoFilter type of macro?
How To Hide/undide A Row, Based On A Cell Value (Macro)
Jun 8, 2009I have the data as follows:
columns B,c,d,e,f,g,h contains data and column A is empty.
What i want is
1. Initially columns c,d,e,f,g,h should be hidden. Only a & b should be visible
2. if i enter a 0 (zero) in A1, then, columns B,c,d,e,f,g,h should remain hidden, for row-1.
3. if i enter a 1 (one) in A1, then, columns B,c,d,e,f,g,h should be visible, for row-1.
Macro To Hide Rows Based On Cell Value
Jun 17, 2003Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
Hide/unhide Col Macro Based On Cell Value
Aug 27, 2009I have a worksheet that contains 10 columns of data. In row 2 I have a formula that will display the result "x" if the data in that column should NOT be hidden, and for all columns of data without an "x" in row 2 I would like to hide the entire column.
Therefore, I am looking for a macro that looks across the range of cells E2:N2 and if there is not an "x" in the cell, then hide that column...
To make things a little more complicated, the value in row 2 will change when other values are amended on other worksheets that feed into this one and I will need the macro to 'unhide' the column as soon an "x" appears in row 2
Macro To Hide / Unhide Worksheet Based On Cell Value
Jul 18, 2010I would like to create a macro/vb code that will unhide a worksheet if cell value is greater than zero, or hide the worksheet if the cell value is zero.
I'm not too familiar with VB code and was wondering if this is possible? I have my doubts, since it means that the code must constantly be running in an endless loop, checking to see if the value has changed?
Hide / Unhide Columns Macro Based On Cell Value?
Dec 7, 2011I want to hide and unhide columns based on a cell's value.
If D6 of the ‘Summary’ Worksheet Is <> to ‘Test1’ and <> ‘Test2’
THEN Hide columns D:K of the ‘Charts – Source Data’ Worksheet
OTHERWISE Unhide columns D:K
Macro To Hide And Unhide Rows Based On Cell Value
Jan 2, 2014I am trying to create a macro that will work on my master summary sheet. The sheet pulls information from other worksheets. I would like to have a macro that will look at range E7:E356. If the value is 0 then hide, but if the value changes then unhide the row. I have tried autofilter but it will not update automatically.
View 1 Replies View RelatedMacro To Hide Rows Based On Cell Value (compared To Other)
Mar 28, 2007I want a macro to hid rows based on a specific value of a cell compared to another.
Example, In a cell I have the current date and time which updates when the the sheet is opened... On a row I have various info including another date in the past. When the date in the past goes over 6 months older than the current date, I want to hide that whole row.
Is this possible? Do I use an IF function in the macro I've seen to remove rows based on cells with specific values?
Macro To Hide/unhide Rows Based On Cell Value
Jun 17, 2003Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
VBA Macro To Filter Rows By Cell Value & Hide Blank Columns
Oct 1, 2008i have created a spreadsheet to simplify our work flow, I am stuck on what is probably the easiest of the commands.
basically have rows dedicated to specific codes and the colums represent values relating to each code, all codes have a different set of values, the attached example only has a few variables but the actual worksheet will have several hundred.
the idea is the user will input the code they wish to get details on in A2 and then press the command button and it will then show (as per the after sheet in the attachment) just the relevant information for that code, so filter the code in column A and hide the columns which hold no value.
where i am getting stuck is I am not sure the best way to proceed, is it best to create the macro button to do the filter and hide or is there a better way using vlookup and a pop up window asking for the relevantcode to be inputted to to retrive the information, again understand there will be hundreds of colums and hundreds of rows and the values may be 20 or 30 colums apart for some of the Codes so this simplification is really saving the user a lot of time.
Excel 2010 :: Macro - Hide Rows Based On Empty Cell
Feb 27, 2012(Excel 2010): Hide row if cell C in this row is empty.
I've just started using macros and I'm sure there is one for this problem.
Conflict Between Auto Save&close Macro And Show/hide Sheets Macro
Oct 16, 2009I am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
Macro And IF Function Is True Then Macro 1 (hide) Is Used
May 20, 2006I have 2 macros one hides a selection of rows and the other unhides them. What i want to be able to do is when an IF function is true then macro 1 (hide) is used. If the function is false then macro 2 (unhide) works. There is a code in VBA
View 3 Replies View RelatedMacro To Hide Row
Jul 20, 2006i am looking for correct code to hide a row based on the cell value. for example, if G8 = 0, hide row 8
Hide The Column Macro
Sep 9, 2008I'm not a VB programmer and have tried to write this macro but I can't seem to understand why it's not working.
View 11 Replies View RelatedMacro To Hide All Toolbars
May 22, 2009I am looking for a macro to hide all toolbars i am using this at the moment
View 4 Replies View RelatedHide Columns Via A Macro ...
Jun 11, 2009I have created this macro (below) in a standalone spreadsheet and the expected results are that Columns A,B,C,D,G,H will be displayed after I run the macro.
But when I use the same macro in my production worksheet (columns and ranges adjusted accordingly) this macro creates the following results: Column A is displayed and all the rest are hidden (B,C,D,E,F,G,H). I am stumped as to why this occurs. Can you advice me as to how to get this macro to work and display A,B,C,D,G,H ?
Macro To Hide CHR(10) Character
Feb 11, 2010I have the code below, which works fine apart from I get a little square coming up every time I run the code, as this gives you a line the Chr(10) has to be there. When I tale the Chr(10) out the little square disappears but then I don't get a new line. I have set the formatting to "wrap text" but it is still showing up. I am not quite sure where to go from here, I have also done a ="test"&CHAR(10)&"test" and that worked fine with no little square.
View 11 Replies View RelatedVBA Macro To Hide Charts?
Jan 5, 2012I have the following piece of code to hide all worksheets in my workbook but modify it to hide the multiple charts I still have open after running this:
Code:
Sub HideAllSheets()
Application.ScreenUpdating = False
Dim ws As Worksheet
[Code].....
Macro To Hide A Range?
Jan 24, 20041. I can create basic macros .. but how do I write a macro to hide a range (of 10 rows) named "dmargin". That for my button no. 1.
2. How do I write a macro to unhide the named range "dmargin" for my button #2.
I tried using VB codes to achieve both conditions -- it works but it either continuously protects or unprotects my ws -- so I think it is better to use a low level codes (macro buttons).
Macro To Hide Rows With 0
Nov 19, 2013optimize the above Mcro to hide rows with "0".
Sub HideRowsw()
With Excel.Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
.EnableEvents = False
End With
[Code]...
Macro To Hide/unhide A Row
Sep 23, 2007I made this simple little macro to hide/unhide a row on a different sheet based on a check box. The row hides fine. The problem I have is unhide. I uncheck the box, but the row stays hidden. What am I missing to make this little gem come to life? This is for tracking popcorn sales for scouting and I'm trying to make it as easy to use as possible.
Sub Patrol1_Scout1()
If True Then
Sheets("Show_n_Deliver_Sold").Rows("7:7").EntireRow.Hidden = True
End If
If False Then
Sheets("Show_n_Deliver_Sold").Rows("7:7").EntireRow.Hidden = False
End If
End Sub
Macro To Hide Zero Rows
Jul 22, 2006I have a series of worksheets in a single workbook. The problem is there are many rows that contain zeros across. The problem is that there is text in that row in case a number does show up there. I need a macro that will hide all of the rows containing zeros or no values.
View 2 Replies View RelatedMacro: Hide Worksheets
Nov 23, 2006I have an Excel spreadsheet from which I run a macro to open another workbook. This other workbook has multiple worksheets. The problem I have is that I never know which worksheet was left active whenever it was last saved. How do I revise my macro to open this workbook and make a specific worksheet active and hide all other worksheets?
View 9 Replies View Related