I would like to copy one cell formula to another but i would like the constant to remain intact. When i pull it over to another cell there is an incremental effect.
I need a formula to give me a ROLLING SUM of the last 12 entries in a column, to give a rolling year sum.
Each month a new number would be added to the column at the end just before the rolling sum calculation.
The formula then would sum the new entry plus the preceding 11 entries. E.g. Cell values as follows: A1=10, A2=6, A3=3, A4=9, A5=4, A6=5, A7=13, A8=2, A9=7, A10=1, A11=14, A12=5
Say the sum is in cell A13, the sum=79.
A row is inserted above A13 and 7 is entered.
Now the sum calculation is in cell A14 and the calculation is from A2:A13 which equals 76.
I have a sheet with dates in this format: 20080910. 1st: I tried to change the date format & tried most of formats but wasn't able to change it to become something like this: 05/22/08. Then what I need is to create a formula to calculate how many years till today has passed since that day.
I have a spreadsheet which uses MS Query to import data from our MRP System. This Spreadsheet has all new orders and qtys required per sales order etc. Each Part number may have several sales orders and different qtys for each. I am looking for help to write a fomula which looks the required qty`s for each sales order & part and check another sheet which has all the avaliable stock to sell on it and populate a column next to the qty req`d with what if anything is available. Both the orders sheet and the stock sheet are MS Queries which refresh at a given interval so cells may change position.
Cutdown Example of Orders Sheet.
Sales Order No. ¦ Part ¦ Qty Req`d ¦ -------------------------------------- 1234 ¦ Apple ¦ 12 ¦ 6777 ¦ Apple ¦ 16 ¦ 7989 ¦ Pear ¦ 4 ¦
cutdown Example of Stock Sheet.
Part ¦Qty in Stock ¦ ---------------------- Apple ¦ 12 ¦ Pear ¦ 3 ¦
Now the fomula should bring back the following
Sales Order No. ¦ Part ¦ Qty Req`d ¦ Qty Avaliable ¦ ---------------------------------------------------- 1234 ¦ Apple ¦ 12 ¦ 12 ¦ 6777 ¦ Apple ¦ 16 ¦ 0 ¦ 7989 ¦ Pear ¦ 4 ¦ 3 ¦
1. I have a list of data (Collated Data) 2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc 3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3). 4. I then want "TAF Form & Employee Name" to close. 5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form 6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J] and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance: On Tab 1, A2's value is [1], K2's value is [9.38]. On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL] Second tab, store's stock: [URL]
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number Range("C8").Select Do Until ActiveCell.Value = "" If ActiveCell.Value "" Then prjnum = ActiveCell.Value Selection.Offset(0, 8).Select
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
My workbook has sevaral sheets reresenting the payment methods used by our customers. Each sheet has a range of cells F9 to Q33 which should hold the value of payments for each working day. e.g. F9 represents April 1st, F10 represents April 2nd.
A daily list of values is supplied which then transfers that day's value into cell E1 on each sheet.
On each sheet I manually have to take the value in E1 and copy and paste special: value into that day's cell e.g. today I will paste into cell K21. The cell value then looks like this '12134.12'. I then edit the cell to put a calculation on the end to divide the value by the value in another cell on the sheet. The cell value ends up like this '=12134.12/$G$5'. This is so I can see the values in thousands of pounds or by changing the value of G5 to 1,000,000 in millions.
Tomorrow I will do the same but in cell K22.
I have to do this on 15 worksheets and I have been struggling to get a macro together to do this. I can get as far as copying and pasting but I don't know how to add the calculation onto the end. I also would like to be able to input the cell destination daily probably with an input box so I can be flexible and potentially run it sevaral times if I need to catch up on previous days.
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab 001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1 2) Paste value into next empty cell in column A (Rows build as students are inputted) 3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
My goal would be to click on a cell within a range of cells (in a column) and have the value copied to a specified destination cell. There would be a few different columns with source cells and two destination cells. Each column would to copy to a specific cell. My ojective is basically to deal with different processing times (days, weeks, months).
Here's a little visual, clicking on C4 for example would copy the value "5" to cell B2. Clicking on D4 would copy "12" to A2.
row/col A B C D E
1 Days Weeks Processing time X (weeks) Processing time Y (in days) Processing time Z (in weeks)
