I have following macro run when the given cell changes:
HTML Code:
Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range
[Code]...
It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...
I am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.
The intent of the code below is to run the marco HideCol when a change is made in cell C10. If I actually change the value in C10 it works. However, I have C10 linked to another worksheet (=anotherpage!A13). When the value changes, my macro is not executing.
Here is the code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim changed As Range
Set changed = Range("C10")
If Not Intersect(Target, changed) Is Nothing Then
HideCol
End If
End Sub
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
I am having grief trying to get a sub from a Module to run when a single cell on a worksheet changes.
The code I have at present is:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("p4")) Is Nothing Then
wksheet = Name
vbgraph wksheet
End If
End Sub
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I am trying to utilise a vba script for DNS resolution which i got from Followup: DNS Lookup and Ping in Excel - CodeProject
I have a list of IP addresses that I want to use this on, however if I test this by using the test instructions, excel does nothing, its just text in a cell, so I would like to know how would this procedure get called from the spreadsheet?
Code:
GetHostname("4.2.2.1") in any Excel cell.
or
Use: GetIpAddress("www.google.com") in any Excel cell.
I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?
View 11 Replies View RelatedIs it possible to have a macro run as soon as there is text typed into cell A2? Basically, I have a form that needs to be filled out, but somehow, users forget to put their name in the box. So I don't want any information to be able to be typed in until a name is entered.
View 9 Replies View RelatedI have a macro that is run by clicking on a macro button. The macro copies the data from Sheet1 and pastes it in another sheet, Sheet2. I added some conditional formatting that colors certain cells red if others are blank on Sheet1. I would like to add some code to my macro that will not allow it to copy and paste from sheet1 to sheet2 if there are any red cells in the range.
View 9 Replies View RelatedI need to check cell G5 (which is G4-G3) before running a macro. if G5 is zero i need to pop up a message to inform the user to enter data in cells G3 & G4. And if G5 is greater than Zero the macro shud run.
I have been trying to find a macro that would allow me to keep a running total in a cell by adding a number to that cell and the same cell would display the sum of the numbers entered. {i.e.} If cell a1 has 0 in it and i click on that cell and put 3 in it would display 3 if i added 2 to it it would display 5 and so on. I need it to do this for about 182 cells on one page.I found this macro that runs automatically every time and works great......But only for one cell so far..."D3"...Ugh!!! I need this macro to work for the following range of cells "colums d thru j from row 3 down to 28 in each colum. Each cell is an individual. There are 182 cells total that each need this macro to work ...all on one page
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Static dAccumulator As Double
With Target
If .Address(False, False) = "D3" Then
If Not IsEmpty(.Value) And IsNumeric(.Value) Then
dAccumulator = dAccumulator + .Value
Else
dAccumulator = 0
End If
Application.EnableEvents = False
.Value = dAccumulator
Application.EnableEvents = True
End If
End With
End Sub
As you see the macro includes cell D3 only, I have made several attempts to include more cells but have failed.... I tried like this
If .Address(False, False) = "D3,E3,F3,G3,H3,I3,J3,D4,E4...and so on" Then
I have tried ....If .Address(False, False) = "D3:J3" Then
and I have tried ....If .Address(False, False) = "23Rx7C" Then
I can make it work for cell d3 but not the others. Will I have to repeat this code for every cell?
I've a workbook with 3 tabs with names "tab1, tab2, difference" and I've a macro that calculates tab1-tab2 and puts the results in tab "difference" This macro runs every time I open the workbook or every time dataset is refreshed on any tab.
everything works great but i've following issue.
let's say my cursor is in tab2 & i refresh/update dataset on tab2 which will trigger macro to update values in tab "difference".. this is good. but, soon after macro runs & updates tab "difference", cursor is no more in tab2 but in tab "difference" this is OK if I've 1 or 2 or few tabs but i've 25 tabs & the user has to go back to the initial tab everytime dataset is updated on any tab. Is there a way for the macro to recognize where the cursor initiallly was & run the macro & place the cursor back to the initial tab?
I have written some very basic code to format a report in excel. When I run the code it take a very long time to execute and I receive the following error message at the foot of the page:
Cell (press esc to cancel)
Annoyingly I have had this error before and found the solution on the web but can't remember where. If memory serves my right I deleted some temp files from a specific location on my hard drive?
I am trying to create a menu that calls macros based on your choice using a drop down combobox (from the control toolbox). Everything works except: When i try to reset the drop down to "Main Menu" using the Linked cell $B$1 excel hangs and suts down evertime. What i would like it to do is reset the drop down to "Main Menu" each time one of the other drop downs are selected. I have really enjoyed this forum and it has been a great resource for me in the past I hope someone can help. I have attaching the file for review.
View 3 Replies View RelatedI want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
Running Two Worksheet Change Scripts Gives Error
I need to run two VBA scripts on the sheet1 tab:
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.
View 8 Replies View RelatedHere in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI have code which changes the worksheet tab names based on contents of a cell. I borrowed some very useful code from a previous thread. I'd like to modify the code so that the tab name updates everytime the cell contents change.
My code is below:
Code:
Sub ReNamer()
For L = 3 To 9
Sheets(L).Name = Sheets(L).Range("A1").Value
Next
End Sub
Is it possible to run a macro when the value of a partcular cell is changed? (and if so how!)
View 9 Replies View Related Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE
Name Number KEY Date
Name1 1 a,b,c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one,three 12/1/2011
AFTER
Name Number KEY Date
Name1 1 a 12/1/2011
Name1 1 b 12/1/2011
Name1 1 c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one 12/1/2011
Name 3 5 three 12/1/2011
Three cells - A1:A3. If A1's value is modified, I would like to have some sort of event macro that recognizes the change and thus initiates and clears the values of cells A2 and A3. Basically I don't want to have to user-initiate the macro...but have the actually changing of A1's value initiate the macro.
View 6 Replies View RelatedI'm trying to make a macro that changes the backcolor of a cell when it's value is higher then 3. I could use some assistance with the code down below which is too long.
View 5 Replies View RelatedI've created a button that, when clicked, will give a time and date stamp. The issue I'm having is that when I click the button, it displays the information in the active cell. I've searched for an answer, but keep coming up blank. Here is my macro:
View 5 Replies View RelatedI'm trying to automatically change the names of the sheets in my workbook based on the contents of cell A1 in each sheet.
I found some code on some website and inserted it into the ThisWorksheet module:
Code:
Private Sub Workbook_Open()
Dim wSheet As Worksheet
On Error Resume Next
For Each wSheet In Me.Worksheets
if wSheet.Name = "SomeName" then
If wSheet.Range("A1") = "" Then
wSheet.Name = "Sheet" & wSheet.Index
[code].....
This code appears to work properly, but only when the workbook is closed and then reopened. Is there a way to make this code run anytime cell A1 in any of the sheets changes? I've found several sample codes that purport to make a macro run automatically on a cell change, but I can't figure out how to incorporate the code above with the Worksheet_Change code to make them work together.
I would like to run a macro when the value of a certain cell changes.I found the following code:
Code:
Private Sub Worksheet_Change(ByVal Target As range)
If Not Intersect(range("A1"), Target) Is Nothing Then
MsgBox "A1 has changed"
End If
End Sub
Cell A1 contains a lookup function. When the value of this cell changes, I would like to run the code. This code runs only when I change it manually.
I have a spreadsheet which has a version number in it on a given cell. This cell is protected as is the spreadsheet.
I want to create a macro that will target the given cell and ask user to input new value and then change the cell value.
This macro will be attached to a button.
I already know how to disable and enable spreadsheet protection but have got no clue as to go about the rest.