I've created a button that, when clicked, will give a time and date stamp. The issue I'm having is that when I click the button, it displays the information in the active cell. I've searched for an answer, but keep coming up blank. Here is my macro:
View 5 RepliesI have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Column A has names and Column B has points in descending order for the names in A. Columns C & D will have names and points, re-sorted for points descending order.
Column E will report if there has been a change in the ranking of the name and by how much. Column F will report the point difference for the names, regardless of order. I have attached a generic example, without any attempts at formulas. I am working with over 600 names.
Using excel 2007. In a A table of marks obtained by a student. I want to get the content of the cell be displayed in a bigger font and in a particular color when i point to it. When I point to a cell content the display should be in a color of my choice say green and the font be greater than 20 pixels.
View 1 Replies View RelatedI have 2 things, a user form and a macro.
In the user form, the user will select a month, and according to the selected month the macro will run up to a certain point. I would like to know if there is a way to sort of "abort" the macro in a certain point, depending of the selected month.
I have a macro that I would like to let a user edit the worksheet and make changes at a certain point. I have tried creating a modeless userform, but the userform only pops up and the code continues running without waiting for input (or running any of the code in the userform). Any way I can accomplish this or what I would be doing wrong with the userform?
View 7 Replies View RelatedI need my macro to stop running 5 rows before an empty row. I have numerical data in cell BE, and a running summation of the numerical data in cell BI.
The last 4 rows of the group of data are subtotal/total rows, followed by an empty row separating this group of data from the next.
I would like the summation to start at the row of my active cell and continue to populate column BI with the running summation of column BE, but stop 5 rows before an empty row at the bottom of the group of data.
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I am using the following code to identify any blank rows in a sheet and delete them:
View 3 Replies View RelatedI'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI would like point to a cell in a spreadsheet, click a Command Button and copy the content of this cell to another cell, say D30.
View 2 Replies View RelatedNeed the syntax for labeling a cell. I want to temporarily label two cells in the same column. Then I'm hoping to use those labels as the start and end points for a range using the script...
View 6 Replies View RelatedI have code which changes the worksheet tab names based on contents of a cell. I borrowed some very useful code from a previous thread. I'd like to modify the code so that the tab name updates everytime the cell contents change.
My code is below:
Code:
Sub ReNamer()
For L = 3 To 9
Sheets(L).Name = Sheets(L).Range("A1").Value
Next
End Sub
Is it possible to run a macro when the value of a partcular cell is changed? (and if so how!)
View 9 Replies View Related Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE
Name Number KEY Date
Name1 1 a,b,c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one,three 12/1/2011
AFTER
Name Number KEY Date
Name1 1 a 12/1/2011
Name1 1 b 12/1/2011
Name1 1 c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one 12/1/2011
Name 3 5 three 12/1/2011
I want a format that does not accept the point and put the hyphen CPF.
I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.
I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.
My basic problem is I compile a newsletter for my company. Many people write me E-mails and i paste their "daily accomplishments" into a template. My question is if there is an easy way to insert bullets at the beginning of each line inside the cell. My company wants it prepared with a certain type. I am attaching a sample.
View 2 Replies View RelatedThree cells - A1:A3. If A1's value is modified, I would like to have some sort of event macro that recognizes the change and thus initiates and clears the values of cells A2 and A3. Basically I don't want to have to user-initiate the macro...but have the actually changing of A1's value initiate the macro.
View 6 Replies View RelatedI am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.
I'm trying to make a macro that changes the backcolor of a cell when it's value is higher then 3. I could use some assistance with the code down below which is too long.
View 5 Replies View RelatedI'm trying to automatically change the names of the sheets in my workbook based on the contents of cell A1 in each sheet.
I found some code on some website and inserted it into the ThisWorksheet module:
Code:
Private Sub Workbook_Open()
Dim wSheet As Worksheet
On Error Resume Next
For Each wSheet In Me.Worksheets
if wSheet.Name = "SomeName" then
If wSheet.Range("A1") = "" Then
wSheet.Name = "Sheet" & wSheet.Index
[code].....
This code appears to work properly, but only when the workbook is closed and then reopened. Is there a way to make this code run anytime cell A1 in any of the sheets changes? I've found several sample codes that purport to make a macro run automatically on a cell change, but I can't figure out how to incorporate the code above with the Worksheet_Change code to make them work together.
I would like to run a macro when the value of a certain cell changes.I found the following code:
Code:
Private Sub Worksheet_Change(ByVal Target As range)
If Not Intersect(range("A1"), Target) Is Nothing Then
MsgBox "A1 has changed"
End If
End Sub
Cell A1 contains a lookup function. When the value of this cell changes, I would like to run the code. This code runs only when I change it manually.
I have following macro run when the given cell changes:
HTML Code:
Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range
[Code]...
It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...
I have a spreadsheet which has a version number in it on a given cell. This cell is protected as is the spreadsheet.
I want to create a macro that will target the given cell and ask user to input new value and then change the cell value.
This macro will be attached to a button.
I already know how to disable and enable spreadsheet protection but have got no clue as to go about the rest.
I have a macro that I would like to run everytime ANY cell is changed in a given worksheet. I've read some posts that explain how to do this when say ONE cell is changed, but I cannot figure out how to expand on that.
View 9 Replies View RelatedI am working on a training scheduler. In which a sheet contains the details of the trainings that are scheduled now i need that if any training is canceled then a mail needs to be sent (Status is updated in cell). I have code to send mail however the problem that i am facing is that how can i execute this macro when training is canceled. I did a search and found the following thread
How to call a macro based on a value of cell?
but the code given in the thread uses a specified cell address to execute the macro. Where as in my case I can not provide a specific cell address as any training can be canceled.
I have a very long if function that takes a value froma cell and then totals the row up to that point.... Is it possible to make this shorter? I have tried to put a sum function in there but that also comes with the nested functions have been exceeded error message...
=IF($S$8=12,P11+O11+N11+M11+L11+K11+J11+I11+H11+G11+F11+E11,IF($S$8=11,O11+N11+M11+L11+K11+J11+I11+H 11+G11+F11+E11,IF($S$8=10,N11+M11+L11+K11+J11+I11+H11+G11+F11+E11,IF($S$8=9,M11+L11+K11+J11+I11+H11+ G11+F11+E11,IF($S$8=8,L11+K11+J11+I11+H11+G11+F11+E11,IF($S$8=7,K11+J11+I11+H11+G11+F11+E11,IF($S$8= 6,J11+I11+H11+G11+F11+E11,IF($S$8=5,I11+H11+G11+F11+E1,))))))))
This one stops short, as it should continue down to $s$8=1.
When a user clicks a cell in Column A, VBA will enter the date in the cell (in the form MMDDYY) and will position the insertion pointer at the end of the date. The user can then enter a four digit number following the MMDDYY. In this worksheet, Column A holds a transaction number, which is always in the form MMDDYYXXXX. I am trying to save the user the trouble of entering the MMDDYY, since it will always be today's date.
View 3 Replies View RelatedI have not used an event macro before and am trying to one update a cell when changing a cell. I am basically copying a number to another cell that is an input for a calculation and then returning the calculated value back. How do I reference r69 in the code to start the event macro?
View 2 Replies View Related