writing a Macro which will move data from a cell to an adjacent cell.
E.g Column B has only data in certain cells, I would like the Macro to work down the column and every time it encounters data in Column B to move it into the adjacent cell into Column A.
I have names like frank steven louis alex stewart
I want to move the last words of each column to a new column.i have the collections of 200 data.
I need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).
Example:
Order#1; Model1; Serial1, Serial2, Serial3
Needs to become:
Order#1; Model1; Serial1
Order#1; Model1; Serial2
Order#1; Model1; Serial3
ABCDE
FGHIJK
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
ABCDEG
F HIJK
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
I wondering if it is possible for a macro to recognise whether or not there is text in an adjacent cell, and if there is, then to copy data from another adjacent cell.
For example, because there is data in C2, data from A2 has been inputted into B2. And any blank cells are left alone.
a
b
c
d
e
ref1
(cell A2 data here)
DATA
DATA
DATA
ref1
I have an issue with groups of data in a row, that I need to copy into a new row beneath the original. I need a formula or VBA that will perform this function:
If any data is present in columns AG-AK, then copy that data into a new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
If any data is present in columns AL-AP, then copy that data into another new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
I have a single workbook with five spreadsheets. My goal is to move data along a path (or work flow) from one sheet to the next by using a "trigger" pulldown menu choice.
Sheet1 = Prospects
Sheet2 = New Sale
Sheet3 = Upgrade Sale
Sheet4 = Won
Sheet5 = Lost
Sheets 1, 2, and 3 use the same data layout for column A - K.
Sheets 4 and 5 have the same A - K as above and also have columns L - R in common.
The last column in sheet 1, 2 and 3 is a pulldown menu (New, Upgrade, Won, Lost).
Data rows on each sheet start at row 7.
The goal is to use the pulldown choice to remove the data from the current sheet (ex: Prospect) and add it to the next open row in the required sheet (ex: New or Upgrade). I also need to be able to make a similar move from New/Upgrade to Won or Lost.
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name
B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
I am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.
14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178
how to cut a string from text and copy it to another cell: Example of a TEXT:..........................
This is Text in one cell - I need to cut the BOLD part. It always ( if appears ) is after statement <b>Kod Producenta</b>: and before <br/> It's not always in the same place. but always between statment above. "<b>Kod Producenta</b>: STRING_THAT_NEED_TO_BE_COPIED_TO_DIFFERENT_CELL <br/>" how can i do it with VBA macro? with cpp would be so much easier but still i need to do this in VBA...
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedMacro to find blank cells in column I , wherever it finds a blank cells , cell value in column F adjacent to blank cell gets copied in column I ......
View 3 Replies View RelatedI have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View Relatedi am looking macro formula to delete row with 2 criteria :
- delete rows if yellow color background and based on adjacent cell (blank cell), otherwise keep rows when adjacent cell not blank
I am using a macro to find a value in a cell and if found, replace the value in the cell to the left. Thr macro works fine - unless the value I am searching for does not exist. The answer is ( Ithink) an IF statement, but I am having problems with the errors, when I try the IF.
The macro below blows up at the ActiveCell.Offset(0, -1) = "109073X line with an error "Run-time error "1004" - Application-defines or object-defined error.
I've tried a number of things I've seen from this board but have not found a way past the error.
If the value is found, the macro moves to the else statment and stops at the ActiveCell statement with the above error. If the value is not found, then the macro goto NotFound.
Sub Macro2()
'
'Range("A1").Select 'Start from the home cell
Dim ValueFound As Object
Set ValueFound = Cells.Find(What:="Cirrus Reversals/CREDITS")
If ValueFound Is Nothing ThenGoTo NotFoundElseActiveCell.Offset(0, -1) = "109073X"'ActiveCell.FormulaR1C1 = "109073X"End If
NotFound:
End Sub
I've created the following Macro based on some of the posts on this great forum! It works great, but I'd like to tweak it for another purpose where it would fill the formula down until a cell in column AF had the value "#N/A" or stopped having the value "clean". The #N/A is from a formula result so I'm not sure if or how the Macro would treat this.
Code:
Sub Y_CleanUp3()
'
' Clean Up Bad Data Macro 3
Dim LR As Integer
Range("AH2").Formula = "=VLOOKUP(X2,'[Territory by Zip Code.xlsx]Sheet1'!$A$2:$B$135000,2,TRUE)"
LR = Range("AF" & Rows.Count).End(xlUp).Row
Range("AH2").AutoFill Destination:=Range("AH2:AH" & LR), Type:=xlFillDefault
With Range("AH2:AH" & LR)
End With
End Sub
I am using Excel 2010.
In my worksheet I have 'Column A' and 'Column B', In 'Column A' are product I.D. numbers. In 'Column B' is a text description of the product, whose I.D. number is in 'Column A,' and should also contain the I.D. number from 'Column A' somewhere in the midst of the descriptive text. However, some of these in 'Column B' do not.
I need to create a function that looks for the value in 'Column A' and determines whether or not it is present in the text of 'Column B'. Therefore, spitting the answer out in 'Column C' so that I can copy it down for 100,000 cells.
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedConverting old reports to usable excel format. I am having trouble using VBA to set up a looping macro that would search Column A for cells with the text string: "ACTIVITY TOTAL". If cell has that value I would like to perform text to column action on the adjacent cell (R0C1). The macro recording for the test to column settings i need is :
Selection.TextToColumns Destination:=ActiveCell, DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=True, Other:=False, OtherChar _
:=":", FieldInfo:=Array(Array(1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, _
1), Array(6, 1), Array(7, 1)), TrailingMinusNumbers:=True
I have attached a sample of what I am currently working with. The actual file has roughly 6000 lines of data, so I would like the macro to go through all lines.
Attached File : LoopingVBA.xlsx
I'm looking for a macro to select data from a larger data set, and then put it in another worksheet. Basically, I want to select any cell in column A that contains "SO5" and move those to the column A of a separate worksheet. Then, for each cell that contains "SO5" would like to move to the right 5 columns and down 3 rows and select from that cell all the way to the end of the table. There may or may not be data in all of the table cells, so the selection should be based off of the column headers which will always have values. I would like to take that data and put it with the corresponding "SO5" in the new sheet.
Here's a sample:
MacroSample.xlsm
This is a simplified version, but I'm trying to get the data from sheet1 into the format in sheet2. Keep in mind that the number of columns and rows may change so it needs to be as dynamic as possible.
I am trying to analyse a whole heap of data generated by an image analysis package. The data is exported out in to excel, I then need to be able ot rearange it a bit and export it out to another program.
I have attached a smaller version of the data as an example. The example data set only contains 3 image planes with ~100 entries for each. A full data set contains 96 planes and ~2000 entries each.
So what i want to do.
I want to setup a workbook i can dump this data into and have it spread everything out over 96 different sheets (1 for each plane).
I can get it to do it for the first lot of data using a IF command like =IF('Object Data'!B:B=1,'Object Data'!D3,)
But that only really works for the first plane, as the starting cell for plane 2 is always going to be different.
So what i need is a formula that will say: look at the plane column, if it equals a certain value print out the value for the other cells in that row.
Is that possible?
Im trying to do a macro that will move data from a number of sheets based on a flag in column W on each sheet.
Basically if the flag in column W is "YES" then i want it to copy the whole row and append it (if thats possible?) into the sheet 'Journal'
I have attached a cut down version with only 3 sheets (one of which is the 'Journal' sheet) and only a few rows on each sheet.
I have data in a single Excel worksheet, single tab, columns A:C.
I want to move that data into Word.
The format in Word:
Contents of A1
Contents of B1
Contents of C1
Blank Line
Contents of A2
Contents of B2
Contents of C2
Blank Line
etc, etc, etc, etc....for all rows in Excel.
My data is now 500+ lines long but the button is on row 1. I have to get back to the top to click it. Can I auto move the button down with my data. Say to one line above my data. i.e. 499 and move as my data increases.
View 3 Replies View RelatedI have sheet 2 with a table with data in A2 thru X500, A1 thru X1 are my headers, A1 data is either Forecast or Sold, B1 data is Month, C1 is Value. I first need to Filter the data by Forecast, then by a specific month then by the value in decending order (keeping in line the data thru x which are headers I don't need to sort by). Next I need to take the 1st 10 lines by a specific month; A thru X and copy it onto a defined section on Sheet 1.
I then need to do this for the 2 more times for the 2 proceeding months. So If we start with Jan, I need the macro to do Feb and march as well.
The end result is that I have Sheet 1 with 3 sections on it each section is 10 lines and the resulting data is my top 10 forecasted deals for Jan, Feb, March. The macro must be able to do this for each month, so if June is chosen the 3 months are june, july and Aug.
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
I'm revamping a key inventory for my company and would like to be able to track the history of each key (name of person who it was issued to, date issued, date returned). I figure the best way to do this for the 90 keys I currently have in circulation is to create drop down lists for each key that has been used by more than one person in its history and upon selecting a given person from the drop down list of keys used more than once, the adjacent cells would populate with the corresponding data of date issued and date returned. Some keys have not been used more than once so not every key will have a drop down. Here is what my key inventory spreadsheet looks right now.
View 3 Replies View RelatedUntil now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):
View 3 Replies View Related