Simply trying to copy data from one worksheet to another. The source sheet is an excel file exported from an Access table. I recorded the macro using the recorder in Excel because I am no programmer, but when I try to run the code, I get this error:
"Code execution has been interrupted" ...and the Range I tried to select in the source file is highlighted by the Editor.
Is the source file protected somehow?
My
______________________________________________________________________________
I'm just starting out on my journey into VBA and this forum has been a valuable resource for picking up hints and tricks
I've decided to cut some corners and ask for help for the final piece of my current jigsaw - effectively this comes in two bits.
Part one:
I want to copy a sheet from two open workbooks and paste them into my active wookbook. Both source workbooks only have one sheet. I want a dialogue box to select the desired workbook, select and copy all data and then paste to a specified sheet (replacing the current data) in the destination workbook. I then want to select the other source workbook from the dialogue box and copy all data to a separate sheet in the destination workbook. I would like the dialogue box to have two options - Ok to select, copy and paste data, Cancel to end the macro.
Part two:
I want to copy a sheet from my source workbook and paste it as a separate sheet in a new workbook (a one page workbook would be ideal). I then want to save the new workbook in a specified location as "Data - Date" in the format 2009 02 12.
I have 3 workbooks open. 1 is my working file and I name it as "Final[date].xlsm". The other 2 files are my source files which are also open are named as source1.xlsx and source2.xlsx. Both the source files has only one tab/sheet as "Sheet1". My objective is to bring the contents of the source file to my working file in 2 different sheets. all the contents in Sheet1 of "Source1.xlsx" should be paste.values only to the "Final[date].xlsm" with a sheet name "BankDetails". This will enable the user also to replace the old data in "BankDetails" tab. The "source2.xlsx" sheet1 has a different situation. I need to copy only the cells with values, not the entire cells, because it has to be pasted (values only) to range C2:L. I have formulas in the other columns before C and after L.
Take note that my working file name is changing every based on the date while my source file has always same file name.
-Open .xls file -Run a macro (it works correctly when run by itself but I'm trying to speed things up) -Save -Close -Open next file, and so on (I'll do this on no more than 200 files at a time all in the same folder)
What im trying to do is have a macro that will open a file called Blue 1.xls in location "I:SchedulesBlue" and then copy data from cells N13:034. Then paste it into another excel file (Press.xls)on worksheet "Press Break" cell G14.
The data that is copied not always fills up the cells N13:O34 so I need it to go to the next blank cell in column N and paste the information from file Blue 2, and so on for Yellow 1, Yellow 2, YellNR, and Green.
So to summarise I need a macro to open 6 files copy data from the same location on each of the files(N13:O34) then close and paste it into a master document(Press.xls) worksheet "Press Break".
I have several ranges (i.e. c11:c22, and d11:d22, etc) in an excel spreadsheet that, when the command button is selected, will copy these values into another already established workbook ("aggregator.xls").
Thus, the command button would have to pick each of these ranges and copy them into the aggregator workbook, (i.e. c11:c22 in the first workbook would be copied into b3:b14 in the aggregator workbook; d11:d22 would be copied into b18:b29 in the aggregator workbook, etc.)
In addition, I need it set up so that when the command button is selected to copy this data, that it will look in the aggregator workbook for the next available column for the section that the data will be copied to so that it doesn't write over the previous data.
I'm trying to do something which I believe is simple but my lack of VBA knowledge is getting in the way. How do I open 2 workbooks then copy a sheet from 1 workbook to another?
I can get the workbooks open just can't copy the sheet across? I get a run time error 9, subscript out of range message on copy sheets code
Code:
Private Sub CommandButton1_Click() 'locate file via range and open the document'
I have a created a main workbook with a macro that opens workbooks on a particular sheet from a list of workbook paths and filenames in the main workbook. The macro are suppose to copy the sheet and paste it into a sheet with a new name that I have defined from the list in the main workbook. I can get the macro to open the workbooks and close them. But I can't get the macro to copy the sheet into the main workbook.
I have attached the code and the workbook. I used slet_ark to delete previous sheet and hentark and henttekstfil to open the different workbooks.
The code I use are:
Public Sub Slet_ark() Dim ark() As Variant Dim Counter As Long Dim FirstSheet As Long Dim LastSheet As Long
I want to know if its possible to write a macro that will prompt me to open a document, then once open it will copy data and paste it into the working spreadsheet. I have a mini macro that cuts and pastes data elsewhere in the sheet but at present I am manually opening a file then copying all and then pasteing the data which is rather slow.
I have 77 excel workbooks that are created each week, they are all in the same directory. I have to open each one and copy the data into a single workbook. The file names change slightly each week.
example: DIST_91124_GROWTH_PRODUCT XXX _07072006.xls The 07072006 is the week ending date and will change. Each of the 77 files has a different DIST_number.
Is there a way to automate this process, it takes me about 4 hours to do it manually.
I’m wondering if this is possible, if I have a folder with say 30 excel spreadsheets (.xls) all named differently (number of files will always change), can I easily write something in VBA to Open all the spreadsheets and copy each sheet over to an existing Excel spreadsheet? For example, have a ‘template’ spreadsheet where the VBA would exist, then have the first sheet, (Sheet1) of each 30 sheets be copied back over to the template.xls? Even better, could I rename each Sheet1 to the name of the file before copying it over? This would basically be the first step in my process of getting the spreadsheet made.
I found this code in a similar question, so how can I rename the Sheet to the opened file name, then copy that over to template.xls?
I am trying to write a macro to open a specific file (i.e site 1) and copy a range and paste that data into another workbook (Comparisons).
I can manage to write the macro to do this one by one, but ideally I would like to write some sort of loop macro that will go down a specific range of files (column A), listing the copy range (column B), and where to paste (column C) until it hits a blank row.
That way I do not have to keep re-programming my comparison spreadsheet every time a new site opens.
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp() ' ' EmployeeExp Macro ' Macro recorded 12/02/2008 by eugene.cross ' Dim i As Integer Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
I tried all failed.We have about 160 different workbooks (one for each business unit) stored online. Staff enters information about their weekly revenue and expenses and here at head office I collect that information and consolidate them.What I am trying to do is that;1.) Create a master Workbook with ~160 worksheets (One worksheet for each unit) named exactly the same with other workbooks2.) And macro can pull the information from related files stored in a certain folderIt is very much like another members problem but I am not sure why I cant get that code working for me? [URL]
For the past several days I have been attempting to write a macro, which in theory would check the values within a one- sheet workbook (we’ll call it run_list.xls) against the values in two different workbooks (we’ll call these production.xls, development.xls). However after several days I am nowhere closer to solving this problem then I was when I started. I’ve tried different scripts and variations of vlookup, but I have been unsuccessful in tailoring what I have found to meet my needs. So I feel it is time to lie down and scream for a medic.
Here’s some background on the workbooks. The sheets in all three workbooks are set up in the same manner. Cell “A1” contains time/ date, cell “A2” contains a lot#, cells “A3:A99” contain positioning data, and cells “B3:B99” contain serial numbers associated with tubes in the specific positions. The only differences between the workbooks are the sheets in production.xls and development.xls are labeled according to their specific lot number.
What I have been trying to do is to take a value from cell "B3"in run_list.xls and find where that value occurs in column B either of workbooks. When that value was found I wanted to copy cell "A2" from its sheet and paste that value in cell "D3" of run_list.xls. I had also wanted to repeat that those steps for every cell in column B containing a serial #. If a serial number was not found I wanted it to report “Not Found”. There are also times when instead of a serial number a phrase “No Trakmate” is listed. In these cases I had intended to skip these lines.
Also, since production.xls, development.xls are updated frequently their names are also updated with new version numbers ie. Production_v10.xls I had intended to allow the user to choose what files to search in but was unable to figure out how to add a second location.
The are two types of workbooks in C:Parts & SVC Sales "Parts Sales" and "service Sales" . The branch name is at the beginning of the file name
Instead of opening up each file individually in C:Parts & SVC Sales and selecting the appropriate csv file in C:/extract using the Update_Macro, I would like the macro to open up all the files in the directory C:Parts & SVC Sales and update each of these with the appropriate csv file in C:extract
The name and description type must match the csv files and then updated eg Br1 Parts Sales to be updated with csv file Br1 Salesperson 01-07-2014 (the date in the file is not important for match the parts file -the branch name for eg BR1 and "salesperson is) i.e Br1 Parts Sales must select BR1 Salesperson 01-07-2014
BR1 Service Sales Must be updated with Br1 Service order repair register.csv (branch name for eg Br1 in this instance name and Service order repair register (pertain to Service Sales) is important)
Br2 Parts Sales to be updated with Br2 Salesperson Br2 Service Sales must be updated with Br2 Service order repair register etc
I need to import the data from a specific sheet (same named sheet on all closed workbooks) to a sheet in an open workbook. All the columns are identical in every workbook but the number of rows is variable, so the data from each subsequent workbook must be appended to the end of the current data.
Whenever a button is pressed, this macro will clear the sheet, then import the data starting in A3. The workbooks are in different folders but they all have the same name, so some sort of explorer window will probably be needed to actually select each file.
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1 While DoIt = 1 Open "C:TempList.txt" for output as #1 Print #1, Files In Folder Close #1
Open "C:TempList.txt" for input as #2 while not eof(2) Line input #2, MyFile Display MyFile on screen Wait for 30 seconds Close MyFile and MyApplication that opened it wend Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I am trying to open set of excel files to fetch data starting from a master excel file where the links are given using a loop. Some of files given as links are either absent or the link is wrong.
* What is the syntax to find if the link is correct/present
* What is the syntax to find if the file is present in specified location
* What is the syntax to find if the file is password protected to open
* I use error handler to resume the next statement if OPEN statement fails.It works fine inside the loop only for first two files.
For example if the third link is errorneous the error handler fails and RUN TIME ERROR occurs.
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB: Sub OpenWorkbooks() Dim WorkbookOpen() Dim WBnames() As String 'Array of WorkBooks to be Open Dim WorkbookCnt As Integer
I have built a sub that prompts the user for a folder then opens every workbook in the folder 1 at a time to get stats on the contents of each workbook. Worked like a dam until I ran into an unexpected bug. Some of the users built on open events in their workbooks. ...
Right now my routine inventories workbooks to get formula counts, cell counts, most complex formula, highest value... it does this by looping throught the sheets and the cells. If there is a way of obtaining those stats without opening the workbook I may need to rethink a lot of my work.
way to suppress the code in the target workbook I open through workbooks.open
Dim myname As String myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook. The Quickbooks file opens fine. The Excel workbook never appears to open but I do get the full file pathname to my excel workbook returned which I then parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I'm trying to copy data from several workbooks into another - in Excel 2003. The following code works perfectly except when there is only the header row in the target workbook. Then I get the following error message, "Run time error 1004. Application defined or Object defined error". How can I get it to find A2 the first time - without coding A2 in?
I want to copy a perticular coloum in one xls sheet ie a.xls(sheet3) coloum to another xls ie b.xls in sheet2(coloum) of that xlsHow can i do this using a macro is their any other better way of doing this
I got 2 workbook called book1 and book2. Book1 is design to be form in the spreadsheet for the user to fill up the particular data. Book2 is the password protected workbook. I created a button in book1 such that when the user click the button, it will automatically transfer the data in book1 (worksheet1) to book2 (worksheet1) without opening up the book2 during transfer data. It simply add a record in the book2 (worksheet1). Can I write such a code to do this?
I have a master book which i need to paste data, the issue is when the data is returned to me the original name of the workbook is sometimes changed to suit the individual, I recorded this macro but in essence i need one that can be universally used, below is the code i used;
Objective: Copy filtered contents between two workbooks.
Reason: I spend HOURS copying and pasting data between workbooks. We get files on average twice a week that contain multiple tabs of data that must be broken down and sent out to the end-users. Example: Monday filename=neverconstant.xlsx, 11 tabs of unique data, 110 users that need the data but business dictates user1 can only see user1 data so I must filter user1 in tabs 1-11, copy raw data, put into a new workbook while naming tabs same as neverconstant.xlsx.
Thursday filename=stillnotconstant.xlsx, 8 tabs of unique data, 110 users that need the data but business dictates user1 can only see user1 data so I must filter user1 in tabs 1-8, copy raw data, put into a new workbook while naming tabs same as stillnotconstant.xlsx.
My biggest hangup is the filename is never constant. I am trying to make something that would add a workbook, add and name necessary tabs, copy and paste data into respective tabs and prompt me to "save as" with the new workbook. I am still VERY new to vba so please dont laugh to hard when you see what I have so far.
I need to create a macro that will insert copied cells(cell range) from the clipboard into a cell on a different workbook and "shift cells down". The cell range in the clipboard will always be different and the position of the cell I select to insert the data into will also vary.
