Macro To Reference Result Of Another Macro
Apr 15, 2009I've looked online and through the forum and can't find a solution.
I'm using the following code...
I've looked online and through the forum and can't find a solution.
I'm using the following code...
I have a spreadsheet containing 2 sheets. In cell A3 of sheet 1 I have a formula that generates either a blank or "1". In sheet 2 I have a macro called Index which I would like to run when the formula in A3 displays "1".
Having done some research I know that the worksheet change event does not work with formula changes so have tried the worksheet calculate function but to no avail. I have done a lot of searching but cannot find what the problem is.
I want to run a macro if the result of an IF function is true.
E.g. cell J55 contains =IF(H55>I55,"Goodbye","")
H55 contains =NOW()
I55 contains =DATE(2012,12,31)
Now by changing the dates etc. it prints Goodbye.... simple enough, but what I want is for it to run a macro that selects a range from the previous year's figures and simply changes the fill colour on the range. The macro for this also works fine.
I have this macro which ranks in reverse order col AA , I need to get the macro to do this ranking in col U .
The smallest number would be ranked 1 to the highest number ranked last .
All I need is the current result too go into col U and not col T when I run macro .
Please ignore the Value error in col T they don't matter at all .
Sheet1 STUVWXYZAA1Fsz PtsFwinFplNo.Swin213#VALUE!
SCRSCR1SCR3135 7.52.427.2413#VALUE!
SCRSCR3SCR5132 4.51.6545.36131 5.51.855.17134 5.51.865.88133 5.51.875.491310 266.5819.610138
184.5916.911136 164.5101312137 102.81114.21313#VALUE! SCRSCR12SCR14139 185.51317.8
[Code] ..........
I have a macro that computes the unique values in a column. I'd like to create a message box that displays the result of the macro.
View 9 Replies View Related
I am testing the code below...
Sub applyCombination()
Dim shtP As Worksheet
Dim j, k As Integer 'j = row; k = col
On Error GoTo errorhandler
Set shtP = Sheets("Sys-Year")........
k = k + 1
Next k
j = j + 2
Next j
Exit Sub
errorhandler:
Exit Sub
End Sub
and, as it is a bit slow to paste a formula in each cell, I was wandering:
Is there any way I can place the resulting value ONLY?
(I don't want to do copy and paste special just values as it takes even more time)
I have the following data which is download as csv, i need a macro to produce result in sheet2, notice if there are duplicate stmt or ledg for the same case No then the units need to be consolidated as shown in sheet2
Outstanding Holdings Case ReportAs At Thursday 4 June, 2009 16:15AccountSourceCase No.Ledg StmtValue DateMessage FeedSecurity CodeDescriptionCcy CodeUnitsExceptionUnsettle UnitsCase TypeKnown SecurityMatch NoCase AgeAge BreakAgent Code:DERIVHOLD ABERDEENJPMC.AEIABIDERIV562272Ledg4-May-09JPMC.AEIABIXT0906AUS 10YR 0309 BOND FAUD-440Hold Singleton CaseYes305779830LATEST CASE NOTES:5-May-09FuturesJPMC.AEIABIDERIV569967Ledg1-Jun-09JPMC.AEIABIYT0906AUS 3YR 0609 BOND FUAUD7-70Hold Singleton CaseYes2599402LATEST CASE NOTES:2-Jun-09FuturesItem Count : 2JPMC.AEIABIFA1569598Ledg29-May-09JPMC.AEIABIQTC0813QUEENSLAND TREASURY CORP 140813 6.00 GBAUD150000015000000Hold Net DifferenceYes3598143JPMC.AEIABIFA1569598Stmt29-May-09305496516891QUEENSLAND TREASURY CORP 6+ BDS 14/ AUG/2013..........
I have created a visual schedule for my team using Excel (2003, SP3 if that matters). Essentially, the user puts in pre determined 1-3 character codes in individual cells, and the macros I have act like a complex Conditional Formatting to keep the formatting neat and consistent throughout the sheet. The actual values are inputted directly into the cells though (this is pertinent to my question), and are things like "A" "M" "$" and "TR"
I have a sheet for every day in a week. Since there are multiple team members on any given day, I have recently made another sheet which pulls a single Team Member's schedule Sunday through Saturday and displays their schedule for the entire week. I have used formulas (specifically VLOOKUP) to do this.
The problem that I am having though, is that the macros that I made to format the days of the week sheets, do not seem to recognize the result of the formulas in the individual Team Member's sheet, and thus do not format them as desired.
My macros are written to evaluate a cell's value via [ Range("example").value ] and will act upon it accordingly with more code. I am assuming that a [ Range("example").value ] would see a cells value as the text of the inputted formula, and not the result of that formula. Is there any way around this? or do I need to avoid the formulas all together and write in code to just copy over what I need?
(I hope this makes sense)
i have the formula "= sum(A1:A10)" in cell A4 & would like to call macro when the value changes. The code i'm using below work's if I manually type in a value, but isn't working with the formula.
Private Sub Worksheet_Change(ByVal Target As Range)
' Checks for cell value change
If Intersect(Target, Range("A4")) Is Nothing Then
Exit Sub
' If cell value change, calls msgbox based on criteria
Else
If Range("E4").Value = "C" And Range("A4").Value > "30" Then
Call MsgBox1
End If
If Range("E4").Value = "F" And Range("A4").Value > "38" Then
Call MsgBox2
End If
End If
End Sub
Excel 2003.
I have been struggling for an hour how to hide a number to text macro in a way that only macro result is displayed in a cell.
(I have one 2-3 years old xls, where I have managed with task, but now can't figure out how and how to unhide the macro
Can it be password protected somehow?
I am trying to implement a simple macro. Here is my
Function Age(DOB)
Age = Int((Now - DOB) / 365)
End Function
Sub Macro1()
Age (Selection)
ActiveCell.Offset(0, 1).Select
******
End Sub
The function basically calculates the persons age using their date of birth. What I need to know is how to copy the result of the function into the cell next to the selected one. (The code above only selects the adjacent cell).
Am trying to get the sheetcalculate to be triggered and execute VBA code when a formula changes its result from positive to negative. The code works fine if I trigger it with a command button click. Auto Merged Post Until 24 Hrs Passes;
View 2 Replies View RelatedI'm looking for a VBA/Macro for delete the entire row if a particular column formula result is zero/blank.
View 1 Replies View RelatedLike u see in attachment i have products in cells wich are painted in different colors. I need to compare two numbers of different product, and write result to column "Type D,C,B". If one of two products is without color/white or they are not the same color then result is always "D", if both products/cells have same color and different number then results is "C", if the color and number is the same then result is "B"
Below cell B2 I will write numbers by hand, when I finish and start macro it will compare first cell B2 and B3 and write result to C3, then compare B3 and B4 and write result to C4 and do that until there is any number in column B:B.
Attached File : excel help.xlsx
The below code is giving wrong error.
[Code] ........
sheet1 has the following data
sheet1 has the following data
empid name loc
1 aaaa ddd
2 bbbb ggg
4 cccc dddd
the 3rd row is empty in sheet1 but still it is showing number of rows as 3.I need macro it will not count if entire row is empty in that sheet.
On column A, I simply do an A-Z sort that gives the expected result. So I recorded it as a macro. In column G is a code that corresponds with column A. When the marcro is executed Column A is sorted but the corresponding value in G stays where it is. Clicking the A-Z button works. But when that action is recorded as a macro I get the above quirck. Since VBA is not my beef, I don't really know what wrong.
View 4 Replies View Relatedhow to run a macro from an IF function, if the function is true macro 1 runs if the function is false macro 2 runs.
View 2 Replies View RelatedI have csv file with tab delimited fields (see attached blacklist.csv). 3rd and 4th fields are in format dd/mm/yyyy hh24:mi:ss, some fields can be zero. I need to split data to columns and display datetime fields in format dd.mm.yyyy hh:mm:ss.
OK... open csv in Excel, select column A, press button "Split in columns", select tab as delimiter, choose date format (DMY) for 3rd and 4th field and press OK. Test is splitted into columns, now select columns C and D and select desired format "dd.mm.yyyy hh:mm:ss". Then I select columns A:E and set column widths to fit data in columns. This all is OK and without problems (see attached file Handmade.xlsx).
But now... Now I record all previous step into macro. There is macro text: [Code] ....
Now I copy macro text into clipboard and open blacklist.csv again. Insert button to list and bind it to new macro. Paste text of macro from clipboard. (See attached file blacklist_beforeClick.xlsm). Now click button Btn and voila... some dates remain in previous format, some dates seems to be in desired format, but day and month are swapped. Why are there differences when comparing data made by hand and data made by macro??? compare.jpg This is the same behavior in more computers, some use Czech version of Excel 2010, some use English version.
I currently have an excel file set up which is refreshing imported data every minute from a server. This data is located on " sheet 1".
This data is the result of another system constantly monitoring (pulling data from) the process at my factory. It consists of temperatures, speeds and other settings.
When a temperature, speed or setting changes then it will be captured by the monitoring system and therefore my excel sheet will load it into the imported data within the next minute.
I would like to be able to capture the change in temperature, for example, if it goes into alarm and automatically send an email reporting this alarm. This alarm is captured in my imported data in a specific column with a 1. If it is out of alarm it is 0. There will not be a report of an item, at any one time, with both a 0 or 1... so there is only one case of any one monitored process.
I have a pivot table set up to filter all the uneeded data out and I currently refresh it manually to show the current status of all alarms. If an alarm occurs on the process, I can refresh my pivot table and it will be indicated with a 1 until it is refreshed again (and the alarm is gone).
So the question:
1. How can I refresh the pivot table automatically every x seconds?
2. How can I automatically send an email on the value change from 0 to 1 in case of an alarm?
I have three cells where a user will input data, in some cases (2T Weld Condition) they will only enter in B12 and C12, but in the case of a 3T weld they will also enter data in the D12 cell. I then use a formula to check for the thinnest material and that is entered into another cell with a formula, B14. I then need to check the value in B14 to verify if it is above zero, but below 0.65 (mm). If it is then I would like to have a message appear on the screen notifying the user that they are outside the acceptable range.
I cannot figure out how to use the information in cell B14 because it is a formula and my code only works with a direct value. The code I am using works if I point to one of the three input cells, B12, C12 or D12. How do I use the information in B14 to work with the code below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$12" Then
If Target.Value < 0.65 Then
Run "MyMacro"
End If
End If
End Sub
MyMacro loads a userform with buttons, etc.
Is there a way to count the total number of rows with data (excluding title row at top and Auto-Sum row at bottom) and put the result in L2?
View 14 Replies View RelatedI need to fixed width-text to column macro and found a reply in the forum.
However, when I apply the macro, the result of zeros in front of figures disappear since the format of value in splitted column doesn't predefined as text
e.g. sample text to split to column:
000122042009ABCDEFG00567
Required result:
0001|22042009|ABCDEFG|00567
when running below macro; result shows:
1|22042009|ABCDEFG|567
(Beginning zeros figures of the first and last column disappear)
Applied Macro:
So basically I have an Excel sheet which has keywords that need to be entered in Google search. I need the URL of the first page of the search result that appears after that keyword is entered. IS there a macro for the same?
View 3 Replies View RelatedI have a lots of number arranged in a column. I want to take log of each number (on the base 2) and show the result in the adjacent column. I want this to be in a macro and the results to be displayed all at a time (I dont want to drag the cursor down to get log values for number corresponding to each row).
View 6 Replies View RelatedI am setting up a spreadsheet that we can use with EditGrid online so we can post it in Forums. These will be used to track contracts for NFL players. I have used multiple formulas to do this. The problem is that I need to do this for 32 teams over 10 years. So what I want to do is be able to have a master sheet and then just have the other 32 sheets pull those formulas from the master but use the info on the individual teams sheet. I'll give you some basics.
The first year starts out where you type in a players position, name, contract length and his rating. here is an example of one of my formulas. The very basic first one
=if(D13
I have a macro named "Attenuator10()"
I created a user from with a button for the use of that macro, however for use of the userform it wants a _Click macro.
What would i need to put into the _Click macro to refernce and perfrom "Attenuator10()"?
I am writing a macro that will use information from the worksheet in use and the one prior to it. The problem is I do not know how to reference the worksheet that will always come before the worksheet in use. To fill you in, I have a monthly budget worksheet that tracks all my monthly financials. What I like to do is compare this months balances (cash, equity, bonds) and see the amount of loss/gain and percentage from the month before.
Here is what i currently have implemented.
This macro was written in the month of October. For this function the macro I wrote will take Octobers cash balance and subtract it from Septembers cash balance. This will give me the gain or loss. Now the problem is if I were to run this macro in November it will still reference September not October. I always want the macro to use the month before (the 1st tab to the left) not a specific tab. I wrote this macro using relative references so I do not understand why it will not use the tab before. Can someone please shed some light on this for me?
i created a spreadsheet which, using vba, disallows sheet deletion (works a dream); problem since has been that i cannot delete any sheets in any workbook anymore, and even a completely empty unsaved spreadsheet will try to open the worksheet containing the original code...
i've tried the following:
- deleted the workbook excel is trying to reference
- ensured there are no macros in excel
- ensured there is no vba code whatsoever
- checked the defined names (nothing)
- checked the vba objects
- debugged the "delete sheet" (didn't work)
- uninstalled all of office 2003, then cleaned registry, then reinstalled from scratch
- all of the above again
- searched about a zillion internet postings
how to reference cell A1 in a macro?
View 9 Replies View RelatedI have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following