I am writing a macro that will use information from the worksheet in use and the one prior to it. The problem is I do not know how to reference the worksheet that will always come before the worksheet in use. To fill you in, I have a monthly budget worksheet that tracks all my monthly financials. What I like to do is compare this months balances (cash, equity, bonds) and see the amount of loss/gain and percentage from the month before.
Here is what i currently have implemented.
This macro was written in the month of October. For this function the macro I wrote will take Octobers cash balance and subtract it from Septembers cash balance. This will give me the gain or loss. Now the problem is if I were to run this macro in November it will still reference September not October. I always want the macro to use the month before (the 1st tab to the left) not a specific tab. I wrote this macro using relative references so I do not understand why it will not use the tab before. Can someone please shed some light on this for me?
Maybe it's not as complicated as i'm thinking, but i'm trying to figure out a formula (or macro) that will let me basically fill in a blank from a (nearly) irrelivant second worksheet. The only similarity the two will have is a PO number, or in my picture diagram, it's a letter. The worksheet that i'm trying to fill in the blank from has maybe 1500 entries, the worksheet i am referencing to has roughly 11,000, so sorting it would make no difference and the columns would be very inconsistant with eachother, but the rows will be similar.
I want to start a formula in Sheet one, that looks at the Letter in that same row, finds that Letter in Sheet two, and gets information from the same row but a few columns over. I might be explaining this poorly, so here's a picture of what i'm referring to. I'm trying to fill in F6 in Sheet 1 with information from F2 in Sheet 2.
I have a Workbook that has a macro that, as of now, is referencing the Workbook's file name. I'd like it to just be referencing the worksheet itself (it is in the same workbook) so that when the file name is changed, the macro still works.
I know which part needs to be changed... just not what to!
Code: Sub CopyData() Dim Cell As Range Dim DstWkb As Workbook Dim DstWks As Worksheet Dim R As Long Dim Rng As Range Dim RngEnd As Range Dim SrcCols() As Variant Dim SrcWks As Worksheet
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
I am completely new to Macro's and VB and the macro below has been generated using the "Record Macro" function in Excel 2013 with a couple of very minor modifications based on some research I have done (hyperlink & input box). My ultimate goal is to make a copy of my "TEMPLATE", which is hidden and the copy could have a variety of names, then create an entry in my "SUMMARY" table that references cells on the newly created sheet. The new entry on the SUMMARY page should be entered in the next available row ... at the moment I need to make sure I have my cursor in the right place before I run the macro. I also want the first cell in the new "SUMMARY" row to create a hyperlink to the newly created worksheet.
The macro does what I need it to do, as long as I name the new sheet "Test", what I would like is for the Macro to recognise the name of the new worksheet and create links to that name. The rows and columns in each new sheet will remain the same, hence the R##C## part will always work.
The "SUMMARY" and "TEMPLATE" worksheet names will not (ever) change.
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB: With Sheets("PICKLIST") myFind = "*" & .[c1].Value & "*" End With If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB: With Sheets("PICKLIST") myFind = "*" & CHOICE & "*" End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code: =COUNTA(ABC!A:A) What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB ABC CDE
And have a formula in column B that converts this to
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
Faulty example of what I'm trying to do: =COUNTIFS('WORKSHEETNAME'!A7:A1000,">12/31/2010",''WORKSHEETNAME'!A7:A1000,"<1/1/2012",''WORKSHEETNAME'!F7:F1000,"Excluded")
I've tried INDIRECT, but I cant seem to make it work.
I want to select a specific worksheet by it's VB name. In other words, if the sheet comes up as: Sheet3 (ESF) in the VB Editor, I would like to choose it using the Sheet3 designation. I can do it using the (ESF) designation using:
Sheets("ESF").Select
But I prefer to use Sheet3 so when the users change the name, the macro still works.
I have a worksheet that changes monthly but has the same fields always. I have created a few macros, and one that is a 'RunAll' for ease of use. Sometimes there is an error and I have to go back and fix some data, So I am looking for a way to change the "SelectBzzAgent" Macro to link data to a new sheet instead of copying. I have attached my spreadsheet.
I have a formula to extract the worksheet name and add the "!" to it so it can be used in a copied formula... I'm just having trouble writing the formula to reference the text in the cell with the worksheet name. If it's easier, I also have the list of worksheets without the "!" - e.g., Sheet1, Sheet2, Sheet3, etc...
I want the formula to calculate, in my example, the sum of 2 cells on a different worksheet.
Been having some trouble with this using VBA. I can't seem to get the code to run properly.
Actually, if there is a way to get a right footer on one worksheet to be referenced in a cell on another, that would be even better but I haven't been able to find anything like that.
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
I have my inventory based in excel. Each brand has it's own file. Each file has several worksheets with all of the items, prices, etc. on them. When I get a shipment, I fill out the next worksheet in line. This way- I have a record of my inventory and a worksheet for each shipment. It has been working very well. The first worksheet in each file is a summary page that shows me the grand totals, shipping charge, etc. from each filled in worksheet page. the problem is I have to build that summary page for each worksheet I fill in.
I would like a way to tell excel to give the same information as I requested in the previous row, but the next worksheet down.
I am trying to use a match index formula to retrieve some data from another workbook...I am wondering if I can use a worksheet name as an IF condition, i.e. I want my match index formula to search the entire workbook, and return values for which there is a match, with the IF conditions being a specific code AND worksheet name.
I've done this loads of times before but doing it this morning seems to not be working at all.
Previously I'd be in Sheet 1, I put the equals sign, I click into Sheet 2 in the cell I want, hit enter, and hey presto the external cell is referenced in Sheet 1.
However, what I'm trying to do here is not reference individual sheets within an excel document, but reference a totally separate Excel document. Can I do this or not?
If so how? Because when I select the second worksheet after I've entered the = sign, it just takes me to the second sheet - it doesn't seem to 'remember' that I'm in the middle of a formula.
I am trying to use a match function to determine which row information resides on so that I can update other information on that row but I am having problems setting up the match function.
The information is obtained from a combobox on a user form which identifies the correct address and then additional information is added to other fields on that line in the spreadsheet. PropertyListAll is a dynamic named range looking at the first column in the spreadsheet. the data starts in row 11.
My code is as follows, but I am getting error message 438. I am assuming I am referencing the workbook and named range incorrectly but I have tried various different combination all to no avail.
Code: Dim wb As Workbook Dim ws As Worksheet Set wb = ThisWorkbook Set ws = wb.Worksheets("Team Vals - Take ons") rownumber = WorksheetFunction.Match(cboProperty.Value, ws & "!PropertyListAll", 0) Sheet1.Range("tblTakeons").cells(rownumber, 2).Value = txtDate.Value
I have recently learned a little about Excel. Enough to be able to do our payroll for my company on it. My question is: On the 1st page of my workbook, is my quarterly report which shows all taxes, social security, and medicare we hold out each payday for each employee. The rest of the worksheets are for each employee. How do I have each employees withholdings automatically go to my quarterly report page?
I have a workbook with 50 worksheets, each worksheet has an Alpha name (ie names of people). Rather than write some code to go through each worksheet to create a report, is it possible to write a formula in a "Reports" worksheet that reads something like
=worksheet10!f2
where worksheet10! is the number of the worksheet (as seen in the VBA project window) while the name is "Billy".
On choosing Auditing Funtion, Trace Dependants, a small icon representing a spreadsheet ? appears at the end of a dashed line. What does this refer to?
I need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
I'm wanting to use the drop-down combo box as a simple way for the user to choose what type of search they wish to perform on the spreadsheet. The search algorithm chosen depends upon the current value show in the combo box.
