Macro To Round Time Upon Exit Of Cell?
Mar 28, 2012
I am creating a time tracking tool.
I would like a macro or event, etc to round an inputted time to the nearest 15 min increment upon exit of a cell.
For example, a user inputs a raw time into cell B5. Upon exit from B5 I would like the macro to round that time to the nearest 15 minutes and keep the time in cell B5. All of the cells in column B would need to have this capability.
1. How do I call teh macro upon exit from the cell
2. What is the code to grab that data from the cell in column B, round it to the nearest 15 minute increment and then put that value back into the same cell?
View 2 Replies
ADVERTISEMENT
Dec 15, 2011
So say you have a loop running a large number (on the order of 1 to 10 billion loops) and you want to exit after some amount of time x, what is the most efficient way to do this?
doing something like:
Code:
stTime=timer
do while timer-stTime < x
*do stuff*
loop
is slow...
i also could approximate the time per loop and only check when the counter passes that general area...but i dont want to use a counter either
View 3 Replies
View Related
Apr 24, 2009
I would like to call upon a function until a certain criterion is fullfilled. Then, I would like to have the result returned to me and exit (all) open functions. For value1 = 1 and value2 = 10 I expect value1*value2 = 100. Instead, the routine returnz zero. What is the logical flaw in the code below.
Function testfunction(value1, value2)
If value1 = value2 Then
'Calculating the difference
testfunction = value1 * value2
Exit Function
ElseIf value1 < value2 Then
value1 = value1 + 1
Call testfunction(matrix1, matrix2)
End If
End Function
View 9 Replies
View Related
May 7, 2009
I am trying to round up or down in excel to the nearest 5 mins , but with no joy
ie 05:24 = 05:25
06:21 = 06:20
View 4 Replies
View Related
Nov 9, 2013
I am trying to round up the total sum of time to the quarter hour. I enter time in fields as follows:
WORKSHEET SETUP:
Column B: Time I begin working
Column C: Time I end working
Column D: Total time C minus B
Cell format for columns B and C: H:MM AM/PM
Cell format for calculated field in column D: H:MM
Calculation, column D to show total time on a daily basis: =IF(C6>0,C6-B6,"")
However, I want to calculate total time per month in decimals, rounded up to the nearest quarter hour.
Example:
I worked 5 minutes (I do not want to reflect 15 minutes for five minutes of work). When I total time for the entire month (total daily time in column D), I would like that total to reflect total Hours:Minutes rounded up the quarter hour - but in decimals!
Assuming this is possible, how should I format cells, and what would the formula be for the total of hours per month?
View 5 Replies
View Related
Aug 11, 2007
Is there a formua that can roundup the time duration to the nearest fifteen minutes?
Eg, if the time duration is 2hr 17 min, can it be rounded to 2hr 15 min?
If is 2hr 31 min, to be rounded to 2hr 30 min.
View 9 Replies
View Related
Jun 21, 2012
How could round a time value like 08:23:51 to the nearest 15 minute like 08:30:00?
View 2 Replies
View Related
Oct 6, 2008
I need a formula to take an entered tim and rounded it to the nearest 1/4 hour
View 9 Replies
View Related
Feb 2, 2006
I have a worksheet that I enter time values into individual cells:
A1 = 6:00
B1 = 12:00
C1 = 12:45
D1 = 17:15
When I enter these values, I would like some of the values to round to the
next higher "30 minute increment" such as Cell C1 should become 13:00.
I would also like some of the values to round back to the next lower "30
minute increment" such as Cell D1 should become 17:00.
View 12 Replies
View Related
Jun 23, 2006
Is it possible to 'round' a time to the next nearest 15min interval?
As an example in cell A1 I have a value that returns 2:07 PM (its formated
as h:mm AM/PM), but in B1 I wish to translate this to the nearest 15min
interval in an hour which is 2:15 PM, if the value in A1 was 5:39 PM I would
want to show 5:45 PM in B1 etc etc
View 13 Replies
View Related
Jan 2, 2007
I am trying to calculate the time between two cells and have the answer in hours, with two decimals, but in .25 minute increments.
Desired result:
1/1/07 12:00 in A1
1/1/07 14:10 in B1
1.25 in C1
0-7 Minutes - round down to 0.00
8-22 Minutes - round to 0.25
23-37 Minutes - round to 0.50
38-52 Minutes - round to 0.75
52-60 Minutes - round to 1.00
Because this is billable time, the number is never negative, so I don't need the formula to verify the first date/time cell is less than the second.
View 9 Replies
View Related
Apr 4, 2009
I need a basic formula that will take my start time from my end time and round it up to the next hour with a two hour minimum. I formated my cell to not have decimals and I tried to use round and roundup along with and if/then formula but no luck. If it makes any difference, all times are in 24hr format.
View 6 Replies
View Related
Mar 26, 2014
I work at a facility where we care for adults with disabilities and we need to record times that clients arrive and leave. I created an attendance check-in sheet that needs the current time entered quickly. Is there code that will allow staff to double click on a cell and have the current time entered and rounded to the nearest quarter hour?
View 1 Replies
View Related
Feb 5, 2009
Is it possible to round up or down a 24HR time format.
ie. 18:06 would be 18:00
18:28 would be 18:30?
View 9 Replies
View Related
Dec 5, 2013
I use the macro below to loop through files, which works fine. Can the code be modified so that when a specific file is opened, the entire macro stops? Exit Sub only seems to stop the inner loop, but I would like the entire macro to be stopped.
Sub Loop_Through_Files()
Dim FSO As Scripting.FileSystemObject
Dim FF As Scripting.Folder
Set FSO = New Scripting.FileSystemObject
Set FF = FSO.GetFolder("D:")
DoOneFolder FF
[Code] ........
View 3 Replies
View Related
Mar 23, 2007
I a macro (Main) I start a userform (FrmMenu.show).
This userform has a cancel button (CmdCancel). When the cancel button is activated I want the macro (Main) to stop running.
View 9 Replies
View Related
Mar 26, 2009
How can i exit or close the macro after the condition,
View 3 Replies
View Related
Mar 6, 2007
I'd like my button-triggered macro to exit and quit IF the sheet it is on is protected when someone presses the button. Here's the idea:
IF the active sheet protected THEN
Display "Can't do this on protected sheet" (and exit macro after click OK)
Else
run the rest of the macro.
View 4 Replies
View Related
Dec 20, 2013
The macro does numerous things, including deleting the sheet that was active when it is called. If the sheet is not deleted, there is no crash. Otherwise, Excel crashes as soon as the VBA interpreter hits "Exit Sub". The Excel message is simply "Excel Stopped Working". The macro also saves the workbook before finishing, and the saved workbook opens just fine, but it's unacceptable to have to kill Excel and restart it every time (I am not the main user for this spreadsheet). I'm using Excel 2010 on Windows 7.
View 7 Replies
View Related
Oct 20, 2009
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies
View Related
Oct 11, 2012
I have a spreadsheet which will be updated by many users and I would like a macro to run after the last cell in a table is completed that locks/protects that row from anyone changing it. Is this possible??
View 9 Replies
View Related
Feb 23, 2007
This seems like a simple task, but I'm drawing a blank. Task; to add the active cells value to an adjoining cells value on exiting the cell.
Example;
'Start point
A1 = 15
B1 = ""
'Enter value in B1
A1 = 15
B1 = 4
'On exit of B1
A1 = 19 (A1 + B1)
B1 = ""
This should work each B cell exited
View 6 Replies
View Related
Aug 5, 2009
i want a cell to round itself. i have a form i'm filling out, based on a percentage of a dollar amount. when the formula calculates, it only shows the first 2 numbers past the dollar point. however, the cell still "knows" what the number is. I have several of these formulas on a spreadsheet, and the sum of them at the bottom of the page is NOT what would you would get adding up the numbers you see on the page, as it is calculating numbers you can't see.
View 5 Replies
View Related
Oct 1, 2006
If I have cells that are formatted to a certain decimal width, say, 2 digits, cells that have the value of 3.599 will appear as 3.60. When I reference this cell in VBA, how can I have it pickup the 3.60? Currently, something like Range("A1") or Range("A1").Value will pickup the 3.599.
I feel like theres something thats like Range("A1").XXXX that will get me there, but I can't seem to guess it.
View 6 Replies
View Related
Dec 19, 2006
Before I start a User Defined Function, does anyone know of away to round thousandths up to next hundredths ($US)
Ex
.031 = .04
.032 = .04
.039 = .04
Just an example of course the actual range of possibilites much larger.
View 2 Replies
View Related
Apr 6, 2014
I am trying hard to use excel macro to round up cell value to next complete figure when it reaches to 0.6, however it should show the first five "0.1, 0.2, 0.3, 0.4, 0.5 exactly. I am giving increment of 0.1 digit to A1 Cell, it is going well. I am unable to get the next complete figure when 0.6 comes. Is it possible in macro.
View 3 Replies
View Related
Jul 27, 2007
It's been awhile since I've done this...and I tried searching for the solution but to no avail.
I'm trying to edit the contents of a series of numbers by using the Rounding function. When I execute my macro on the next cell, it uses the value of the original cell when the macro was created. Here's a copy of my macro:
Sub RoundTest()
'
' RoundTest Macro
' Macro recorded 7/26/2007 by Aramark Uniform Services
'
' Keyboard Shortcut: Ctrl+l
'
ActiveCell.FormulaR1C1 = "=ROUND(2103.86,0)"
ActiveCell.Offset(1, 0).Range("A1").Select
End Sub
View 6 Replies
View Related
Mar 25, 2014
I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?
View 11 Replies
View Related
Dec 3, 2013
the way my spreadsheet's set up so far is that each employee should have a goal of, say, 100 for how many people they need to sign up. But they each have specific geographic breakdowns in their turf, some of which might be bigger or smaller than others, but at the end should all add up to 100 for each employee.
It's not super hard to do since I just take a goal of 100, in this example, and multiply it by the percent of population of the area in their overall assignment and give them a goal for that area based on that. So if Philadelphia has 70% of their total population, Upper Darby has 20% of their total population, and Phoenixville has 10% of their total population -- the goals would come out like this:
Philadelphia, Goal: 70
Upper Darby, Goal: 20
Phoenixville, Goal: 10
Ryan, Total Goal: 100
For some of the employees, that works out perfectly -- but based on the population sizes, the rounding sometimes gets a little off and it could end up like this:
Philadelphia, Goal: 71
Upper Darby, Goal: 19
Phoenixville, Goal: 11
Ryan, Total Goal: 101
For most employees, it ends up being dead-on 100 -- but there are some whose totals are at 98 or 99 or 101, and I was wondering if there was a way to force it to shave a point off or add a point on somewhere, pending on how close the decimal was when it rounded to make sure that it always ends up exactly on 100. (I'm using 'Data >> Subtotals' to get what's being represented above as "Ryan, Total Goal.")
View 10 Replies
View Related
Dec 10, 2012
I have a cell that is going to be used for the quantity of a certain item. I would like to dummy proof this sheet as much as possible so that if someone puts in 21.5, that it will do something like change the value to either 21 or 22, since there can't really be a .5 of this item.
View 5 Replies
View Related
