Tracking Forums, Newsgroups, Maling Lists
Home Scripts Tutorials Tracker Forums
  Advanced Search
  HOME    TRACKER    Excel


Advertisements:










Userform Exit Macro


I a macro (Main) I start a userform (FrmMenu.show).
This userform has a cancel button (CmdCancel). When the cancel button is activated I want the macro (Main) to stop running.


View Complete Thread with Replies

Sponsored Links:

Related Forum Messages:
Exit Button On Userform
can i remove the exit button from a userform

View Replies!   View Related
Exit UserForm Private Module
I would like the users to be able to exit the whole module via double clicking the form. When the form is double clicked, the double click event appears and I am wondering how to put code into this procedure which exits the whole module.

View Replies!   View Related
Exit Function- The Result Returned To Me And Exit (all) Open Functions
I would like to call upon a function until a certain criterion is fullfilled. Then, I would like to have the result returned to me and exit (all) open functions. For value1 = 1 and value2 = 10 I expect value1*value2 = 100. Instead, the routine returnz zero. What is the logical flaw in the code below.

Function testfunction(value1, value2)
If value1 = value2 Then
'Calculating the difference
testfunction = value1 * value2
Exit Function
ElseIf value1 < value2 Then
value1 = value1 + 1
Call testfunction(matrix1, matrix2)
End If
End Function

View Replies!   View Related
Exit Or Close The Macro After The Condition
How can i exit or close the macro after the condition,

View Replies!   View Related
Exit Macro If Sheet Protected....!
I'd like my button-triggered macro to exit and quit IF the sheet it is on is protected when someone presses the button. Here's the idea:

IF the active sheet protected THEN
Display "Can't do this on protected sheet" (and exit macro after click OK)
Else
run the rest of the macro.

View Replies!   View Related
Userform Textbox Event That Fires After I Exit The Textbox
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.

I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.

View Replies!   View Related
Macro That Deletes Sheet With Control & Shows UserForm Causes UserForm To Disappear
This is weird - if you delete a sheet that contained a control then

a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End
b. public variables lose their value

These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?


View Replies!   View Related
Userform To Control Macro Features. Macro = Search For File Type
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.

The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.

I have created a basic userform outline, 'UF1' for the user to define:
Select File Extension
Select Folder to Search
Destination Sheet

I just don't have any idea how to sync the two.

If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.

The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.

'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.

'CB1_Find_Files' should activate the macro to find any files for the specified criteria.

There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.

View Replies!   View Related
Exit On Error
I have some code that expects the user to select a file to open. If they don't select a file it posts an error message "Stopping because you didn't select a file" then it exits. However then Excel pops a debug window. How can I get it to cleanly exit and not pop the debug window?

View Replies!   View Related
Exit Sub Alternative
Exit Sub alternative. I have the following

View Replies!   View Related
Exit Without Saving
how to set up a macro that will close my workbook without saving.

View Replies!   View Related
Forcing Me To Save As On Exit.
recently excel 2003 began forcing the save as dialogue box when i try to close the workbook. I do not remember installing anything in particular on my machine when it started acting up.

I tried uninstalling office with Revo Uninstaller (gets rid of those pesky registry entries that the control panel add/remove leaves behind).

I reinstalled and I have the same issue.

Im thinking it is a macro of some sort as when I open the program holding down shift, it does not prompt me to save as when I exit. I do have one excel add in installed, but I have used it for many years without any issues.

View Replies!   View Related
Exit On Error: Find
I have a txt calendar control the askes the user for a date, then find that date in another sheet.

If the user enters a date out of my range the code bugs out. Is there an error handeler for this? Like can I set an error message?

View Replies!   View Related
Userforms Causes Sub Routine To Exit
Userforms Causes Sub Routine To Exit ...

View Replies!   View Related
How To EXIT The Entire Procedure
If Sub A is calling Sub B which is calling Sub C, then how to exit the entire procedure from Sub C, if one needs to?

Placing Exit Sub in Sub C would exit the sub and returns control to Sub B, and the execution of procedure continues!

View Replies!   View Related
Exit Calling Procedure
I have a procedure(try) which call two other procedures ( try1(),try2())
try1 - ask for a range of First cell
try2 - ask for a range of Last cell

Now issue comes when user pressess cancel button for try1() it Exits try1() and goes back to try() and calls try2() but i want that if user pressess cancel it must also exit from try() too (calling function)


Sub try()

try1
try2

End Sub

Sub try1()

View Replies!   View Related
Exit Sub Is Deactivating All Other Macros
I have the code below assigned to a commandbutton. I also have 4 or so other private sub macros on this worksheet. When the activecell is in range 2 and I push the button, it exits the sub routine like it's supposed to. But then it deactivates all the other macros and they won't work again until I close the workbook. How can I get this code to exit the macro if the first if statement is true and to not affect any other macros?

View Replies!   View Related
Tidy Way To Exit Sub On Cancel
I have an input box which has OK and cancel buttons If the user clicks cancel I would like to routine to end, which I can do with exit sub. However this particular sub routine has been called from another so the rest of the code continues. Is there a way of exiting all the routines on cancel -- or a neater way than exit sub ?

View Replies!   View Related
Exit Without Option To Save
Is there anyway I can make excel quit using VBA without the option of saving the changes popping up?

View Replies!   View Related
Exit Module Not Procedure
I know to exit a sub one uses 'Exit Sub', however I have a sub that is calling a second sub (within the same model), and if a variable is a certain value I want to exit...however, when I use 'Exit Sub' it exits the called sub, but then just continues from the original sub...it's not exiting it too. I can work a work around, but I'm wondering if there is a built in solution to this problem?

View Replies!   View Related
Exit Or Skip Loop
I have a For Each...Next loop to read and write data from one workbook to another. Now, it's possible but unlikely that a certain "wellindex" (as defined by the Column A value) occurs more than once in the source spreadsheet, and only the most recent value should be used. And now to the actual question. Currently my macro runs a check to see if the current cell's wellindex has already been used, and if so, then it warns the user of potential double-entry. What I'd like to have it do is have it check whether the current cell's wellindex has duplicates further down (e.g., using a "findnext" method), and if so, then skip to the next cell in the For...next loop. I know that I can exit a loop with "Exit For" but I don't know how to have it go straight to "Next c" without embedding everything in an If statement.

Sub DataImport()
'Define variables
Dim sourcedata, sourcename, originname, sourcedate As String 'filename variables
Dim wellindex, ch4, co2, o2, bal, adj, com As String 'data variables
Dim cor, owp, owp2 As String, overwrite As Integer 'prompting variables
overwrite = 0
'Set up the data source
originname = ActiveWorkbook.Name
sourcedata = Application. GetOpenFilename("Data Output Files (*.csv), *.csv", , "Open the source file").........................

View Replies!   View Related
Exit Loop On Criteria
I have a table named INPUT and a unique list named MODELLIST. I am doing a find function for each model from the modellist to the table input. I am using a autofilter to sort data and find to collect column data. Some models from the modellist may not be present in the table input. how do I check first if there is any data and exit loop if true. The following is part of the code that I am using and the error that is displayed is NEXT without FOR

Dim rFoundIt As Range
Dim iLoop As Integer
For Each model In Worksheets("sheet2").Range("modellist")
Worksheets("input").Activate
Selection.AutoFilter Field:=3, Criteria1:=model
With Sheets("input").Range("input")
Set rFoundIt = .Cells(1, 1)
For iLoop = 1 To WorksheetFunction. CountIf _
(Sheets("input").Range("input"), model)...............

View Replies!   View Related
Call Combobox_change Function On Exit.
I'm using an activex combobox in excel. It display 4 posible choices, and one of them is "Other". When someone select "other" there is a textbox named "tb" that should be filled. Otherwise tb should be invisible. Combobox change() function looks like that:

View Replies!   View Related
Exit Loop When Condition Met
My code is meant to ensure a string in a cell begins with three letters and ends with 5 numbers. It seems to work, but how can I exit the loop and go to the message box once the boolean variable is set to true? I was hoping to avoid using labels. Also, I would appreciate any suggestions in compacting the code if possible, but without using CreateObjects".


Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("h17")) Is Nothing Then Exit Sub

Dim Ls As String
Dim i As Integer, z As Integer
Dim MyString As String
Dim MyClVal As String: MyClVal = Target.Value
Dim MyBL As Boolean: MyBL = False

View Replies!   View Related
Edit Chart Code To Exit If
I just wonder if we can have the code to exit if G2 returns an even number, as 2, 4, 6 etc?

Sub Listbox3_Change()

If ActiveSheet.Index 1 Then Exit Sub
Application.ScreenUpdating = False

With Sheets(1)
.Unprotect "mypsw"
.Range("G2").Value = ActiveSheet.ListBoxes(Application.Caller).Value
With .ChartObjects("Chart 2").Chart.Axes(xlValue)
If VBA.VarType(Sheets(1).Range("D1").Value) = VBA.vbError Then Exit Sub
If VBA.VarType(Sheets(1).Range("E1").Value) = VBA.vbError Then Exit Sub

.MinimumScale = (Sheets(1).Range("D1") - 0)..............


View Replies!   View Related
Crashes Upon Exit Of Print Preview
I have a UDF that is used to identify autofiltered columns. Everything works great unless I am using the UDF for a conditional formatting, and then I try to use Print Preview.

Here is the UDF I am using: ...

View Replies!   View Related
Re-enabling The Command Bar On Exit
I have a worksheet that I protect from cell deletions by disabling the command function for 'delete' using the following
CommandBars.FindControl(ID:=292).Enabled = False

I execute this code in two subs:

Private Sub Worksheet_Change(ByVal Target As Range)
CommandBars.FindControl(ID:=292).Enabled = False

...
and
...

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
CommandBars.FindControl(ID:=292).Enabled = False

...
all fine and good, works great only problem is...

once disabled this function is NOT re-enabled when I leave the workbook.

When the sheet deactivates I run this:
______________________________________________________________
Private Sub Worksheet_Deactivate()
CommandBars.FindControl(ID:=292).Enabled = True
End Sub
____________________________________________________

that works fine while I am changing worksheets within the workbook.

But it doesn't do for this function to remain disabled even after I close the workbook and then it's disabled in all the other workbooks.

What I need is to have the code re-enable this function when the workbook closes or when I activate a different workbook so that the function is only disabled within the specific worksheet of the specific workbook and it remains enabled everywhere else ESPECIALLY after I close that sheet and workbook where I have it disabled!

I tried this:

______________________________________________________________
Private Sub Workbook_Deactivate()
CommandBars.FindControl(ID:=292).Enabled = True
End Sub
____________________________________________________

View Replies!   View Related
IF Statements + MsgBox And Exit Without Saving
following code works with the remarked lines out. I want to do is is if
Range ("H5") <+ 0. then put up a message box and when user clicks on the OK in message box, to exit Excel and not save the workbook. Otherwise run the code as is.

I do this stuff for free as part of a retired businessman's organization. Keeps me young, but Excel is so powerful it is difficult to grasp at times.

View Replies!   View Related
Exit Sub Property Is Not Working Properly!!
I have the following two codes on a userform, The first code performs two steps:

The first step is running the second code (MyDate), which is used for checking the entries in the userform textboxes and if there is any wrong entry a message box appears then it exits sub.

However, what happens when it finds any wrong entry is that it displays the msgbox and instead of exiting sub as it is requested in the (MyDate) code, it resumes running and moves to the second step and adds 1 to ComboBox1 ListIndex.

View Replies!   View Related
Show Custom View Upon Exit
I am trying to set a custom view when exiting, but I keep getting runtime error 424 saying an object is required. I am attempting to unprotect the sheets, check the value of an option button, set the custom view based on that value, and then protect the sheets. Please keep in mind that the user may or may not be on the sheet containing the option button when exiting. Here is the code I am having trouble with.

Private Sub Workbook_BeforeClose(Cancel As Boolean)

Call UnprotectSheets 'Unlock to set option button value

With Worksheets("Customer_Info")
If btnExistCust.Value = True Then
ActiveWorkbook.CustomViews("Sales_Exist").Show
Else
ActiveWorkbook.CustomViews("Sales_New").Show
End If
End With

Call ProtectSheets 'Call the sub before closing

End Sub

View Replies!   View Related
Re-enable Auto-calculate Upon Exit
I have some VBA that disables AutoCalculate on certain sheets of my workbook. I am looking for a method to re-enable auto-calculate upon exiting / closing the workbook, so that my users dont get stuck with auto-calculate being off for other workbooks.

View Replies!   View Related
Excel Called From VBS Does Not Fully Exit
I am trying to sort a csv file through a VBScript. My problem is that Excel continues to run as a process on script completion. Running multiple variation of this script results in multiple instances of Excel being present in the WinXP Process Manager.

Set xlObj = CreateObject("Excel.Application")
xlObj.Visible = false
xlObj.Workbooks.Open "C:Test.csv"
xlObj.ActiveWorkbook.ActiveSheet.Range("A1").Sort xlObj.ActiveWorkbook.ActiveSheet.Range("A1"),,,,,,,0
xlObj.ActiveWorkBook.Save
xlObj.ActiveWorkBook.Close true
xlObj.quit
set xlObj = Nothing
As a second part to my question, is there any way to modify the code to allow multiple field sorts, i.e., A1 is Primary, C1 is secondary?


View Replies!   View Related
Check If Sheets Exist...if Not, Exit Program
finding the proper code (which will exist in a larger macros) to check to see if specific worksheets exist. Have looked at functions, Cases, On Error checks and nothing seems to do the job I need it too. Here's what I'm loooking at doing...

Background: Main job of macros is to open a source file and systematically copy and paste data from several specific sheets (8 out of 15) into 'like' sheets in a destination file. Destination file is where the macros is run from.

Before starting any copying or pasting I want to make sure the source file has all the correct worksheets. I've run into cases where users have either deleted or renamed worksheets and as a result my consolidation macros falls down. So the order of operations at the beginning of my macros would be...

- Open source file
- Check to make sure worksheets with proper names exist
- If they do exist, continue with macros
- If even one worksheet can't be found (either deleted, or renamed), then prompt user to check the source file and then stop the program.

View Replies!   View Related
TextBox Triggers A Code On The Exit Event
I have a Userform with a textbox1 and a commandbutton. TextBox1 triggers a code on the exit event. CommandButton1 simply unloads the UserForm. If a user enters data in the textbox, but does not exit and instead clicks the commandbutton to unload the UserForm, the exit event code is still triggered and then for some reason the commandbutton no longer responds to being clicked. I can't seem to find a way around this.

If the commandbutton is clicked, I simply want the UserForm to be unloaded and the exit event for the textbox ignored

View Replies!   View Related
Msgbox Syntax (display A Message And Then Exit The Sub)
Before executing my code I want to check down a column to make sure there are no entries in it. If there are then I want to display a message and then exit the sub. If all the cells in the range are empty then the code is to be executed.
What I have so far is

View Replies!   View Related
To Assign A Counter To The MsgBox- Exit Loop
This loop is to find if there is the string "Need Parent " in the range. If so the Msgbox notifies the user.

After it finds the string, the loop needs to exit- I tried to assign a counter to the MsgBox, but no go....

For i = 6 To lLrw
If Range("D" & i).Value = "Need Parent" Then
MsgBox "Stop. Parent Records Still Need To Be Created."
End If
ii = MsgBox + 1
If MsgBox > 0 Then Exit For
End If
Next i

View Replies!   View Related
Close Combobox List On Mouse Exit
On a userform I am using the MouseMove event to dropdown a combobox list. When I move the mouse away from the combobox the list remains dropped down. I want the list to close when the mouse moves away as it hides other controls on the form.
I have tried using MouseMove when over the userform or transparent labels around the combobox to set focus to other controls but this does not close the combobox list. The only way to close the list is to click away from the combobox. I have looked at how to simulate a mouse click but that is beyond my limited understanding of vba. If this is the only way to achieve the required result then I need some patient assistance. I am using Excel 2000 on XP.

View Replies!   View Related
Test What Control Will Be Receiving Focus In Exit Event?
I need to test what control will receive focus after the exit event
this test needs to be in the exit event so i am able to validate and cancel only if focus will be the enter button

Private Sub myTextBox_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If NextControl.Name = "EnterButton" Then
DoMyValidationTest 'and other stuff, such as set TabIndex
Else
'do nothing
End If
End Sub
so what should "NextControl" actualy be???

View Replies!   View Related
Can't Exit Design Mode Because - Error Msg
I have a production report card spreadsheet with numerous checkboxes. Originally I also had text boxes for user input - which I have since removed all of and simply unlocked cells for user input (I protect the spreadsheet). My problem is that now that I have removed ALL of the textboxes - I get the error message "Can't exit design mode because Control 'TextBox3' can not be created." everytime I go to lock the spreadsheet after tweeking or upon opening of the file. I also cannot use the checkboxes now because I am stuck in design mode.

Any thoughts on what might be causing this...or better yet...how to stop the error msg altogether? I googled and no answers...some theories that it was a bug with excel2003...but I find it hard to believe as I found posts for the same message of users of WORD2003...so I am thinking it might be VBA related?

View Replies!   View Related
Force Data Input In Specific Fields Before Exit
I have an excel sheet that has two text fields "A2" 2 digit (Month) and "B2" 2 digit (Day of week), both are currenlty in a text format. I need to force the users of this sheet to enter values in both of these fields prior to saving. Is there a simple macro that I can run to check these fields.

View Replies!   View Related
Enter & Exit Events In Control Classes
A lot of people seem to have been having troubles with the fact that if you try to use controls in a class with the "withevents" keyword, some events (like Enter & Exit) are not included in the tracked events. I have been having some troubles with this myself & have not yet seen any particularly satisfying workarounds to this problem.

So here is an idea I just had, I have not made any attempt yet to implement it & so have no idea how complicated doing so would be, but I thought I would just put it out here & get some feedback on the idea before I spend any real time working on it.

The idea is to create a blank, transparent label that covers the entire form, monitor the Click event of this label, & pass it back to the normal controls on the form as necessary. Does this sound doable, or do you all think it would be merely an exercise in futility? If anyone has any better suggestions for how to work around this lack of events,

View Replies!   View Related
Multiple Conditional Format Changes As A SubFunction To TextBox-Exit() Event
What I want to do is have a sub-Function that will check to make sure what is entered into a TextBox is a number, and if it is NOT a number that it changes the color of the TextBox to Yellow.

Currently if the entry is not numeric it just clears the cell and that part is good, but I want the color to flag that the user TRIED to put something there.

I'm doing this as a sub-Function since I need to use this check about 20-25 times.

View Replies!   View Related
Meaning: Quit, Exit, Break, Continue & Return
difference between these statements:
Quit, Exit , Break , Continue, Return

For example if want to stop code execution what should I use?

View Replies!   View Related
Userform And Macro
I was just wondering how can I save a userform as macro, so the user can just run the macro and so the form would pop up.

View Replies!   View Related
Run Macro On A Userform
How can I run a macro from within a commandbutton on a userform?

Ive tried

private sub commandbutton_click()
macro1
end sub
but not worked..

View Replies!   View Related
Passing Value From Userform To Macro
I have used my Excel Bible as well as MrExcel.com and tek-tips.com to write the current code I have... but it doesnt work! I think I am just missing a small piece, but I dont see what it is.

I have a macro that calls a userform - from the userform, a Customer is chosen. When the "extract" button is clicked on in the userform, it should pass the customer name to the next macro to do a bunch of stuff - including filtering the data by the customer chosen in the userform.

Here is the code - take a look and see if you can figure out why it doesnt work.

Code for "extract" button (I have tried several differnt variations - this is the current one):

Code: ....

View Replies!   View Related
Macro Pulls A Userform
I've got a working macro that pulls a Userform. Everything works correctly but I'd like to have the form displayed on the far right instead of center screen. I've tried all the options on the form properties list to no avail.

Private Sub Workbook_Open()
ActiveWindow.WindowState = xlMaximized
Worksheets(1).Select
Range("A1").Select
UserForm_1.Show
End Sub

View Replies!   View Related
Run Macro From Userform
I'm trying to run the macro AddAdvertisers after clicking a command button in a userform, but I keep getting an "Expected Function or Variable" error after clicking on the button.

FYI - both subs are Public, and the macro is in module Advertisers.


Run (AddAdvertisers)


View Replies!   View Related
How Do I Call A UserForm From Within A Macro
I've created a simple UserForm, and with some great help from royUK. I've managed to get it working to suite my needs. The next thing I need to do is call it when the user runs the macro.

How do I call the UserForm from within the macro that I created?

Once the user gives the input, how do I take the values and pass them to the loop in the macro?

View Replies!   View Related
Macro For Textbox In Userform
I have an userform say frmNew. In the form, I have three textboxes: txtCost, txtRate, txtSale.

The following two boxes are filled by a user:
txtCost contain the Cost of an item (numbers)
txtRate contain the % Rate (3 character), i.e. the txtRate can contain only A,B,C,D,E,F,G,H,I and J. The corresponding value is 1,2,....9,0 respsctively.
If a user enters any numbners or characters other than A,B,..J, a msgbox should popup with a error message.

The value for txtSale is generated by the Macro i.e. txtSale = (txtCost + (txtCost * txtRate)).

View Replies!   View Related
Copyright 2005-08 www.BigResource.com, All rights reserved