Anyway, I have 70 Sheets ( Tabs ) which when i'm finished will have the same cells in the same location of each sheet, referring back to a different line in a Data sheet at the beginning.
IN order for me to get there i need to edit each of the relevent cells but changing the formula so that it reads the next line down. I was thinking i could maybe get a macro whicle will increment each of the formula cells contained with a Named Range, this would make it more accurate than using the Find/Replace method of updating the formula's on a per cell basis....
I have a Database and every entry in the database has its own corresponding sheet with the data in a more viewer-friendly format. I want to assign a macro to a button to loop through all the sheets, copy the cells and paste to the database (to update the database).
Also, nothing prevents the user from deleting the sheets or mixing them. So is there a way to take the reference number from the database in column B, search for the corresponding sheet which has the reference number in cell B3 and then update it accordingly.
Code: Sub Button19_Click() Dim WS_Count As Integer Dim I As Integer
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5 E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem ... .Fields.Item(1).value = activecell 'activecell value = "Joseph" If Not isempty(activecell.offset(0,1)) Then .Fields.Item(2).value = activecell.offset(0,1).value Else .Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works End If ... End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty ' or .Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I am trying to use Vlookup and match on a large volume of data. The Vlookup true function was having trouble when an exact match occurred. I changed the table to allow for all options (sizes in this case) but the Vlookup with false came up with #N/A. The Vlookup key was the result of a formula. I then typed the same data and the formula was successful. I then copied and pasted Value the entire contents of the cell. I still received the #N/A. I then pressed [F2] to edit the cell and then pressed enter and this was successful. I have over 60,000 cells to edit and can not do manually. Any macro run the [F2] function on a range of cells or another way.
I need to have multiple (up to 6) pivot tables on the spreadsheet with shared external data source. As a data source i have a csv file. Also, i need to be able to load data file on demand. I have created a button on the sheet that would load File dialog and let user select whatever csv data file they need. Then the idea was to update pivot cache connection and command properties using VBA with new file name. Here is the code :
Dim pc As PivotCache Set pc = ActiveWorkbook.PivotCaches(1) Dim ODBC_CONNECT_STRING As String ' FullFilename is a new absolute path to selected csv file ODBC_CONNECT_STRING = "ODBC;DBQ=" & FullFilename & ";" & _ "DefaultDir=" & FullFilename & ";" & _ "Driver={Microsoft Text Driver (*.txt; *.csv)};" & _ "DriverId=27;FIL=text;MaxBufferSize=2048;MaxScanRows=8;PageTimeout=5;" & _ "SafeTransactions=0;Threads=3;UserCommitSync=Yes;".................
I have a Workbook with multiple PivotTables which are feed from an external data cube. I need to update all of this Pivotables to the same date through VBA. The date will be a known variable and it corresponds to the "Periodo" field. I had thought of doing this by having the date stored in a cell of maybe with a calendar pop-up
i have a list of about 20,000 phone numbers that I need to edit.
all start 01 123456 01 123457 01 123458 etc
I am trying to create a macro that will change them to
+001123456 +001123457 +001123458 Etc
However, no matter what I try it always comes out as
+001123456 +001123456 +001123456
F2 Copy and paste is going to take me forever, and I am sure that there must be a quicker way to do this.
this is my first time creating macros so am completly lost. I want to keep the text that is in the cell that I am editing, just add the country code and delete the space.
I have a userform I attached here with 3 combo boxes where a user can pick districts and schools, etc. When they click ok, the various tabs in this macro enabled workbook will "refresh" with the metrics for that entity)combination of picks from form) across the board. Each tab will have multiple pivot charts/tables so the filters will need to be addressed. I've been looking for code to kind of match this scenario. I've seen some that kind of in the ballpark, but due to the size and complexity, I suspect this will be extensive, right?
I've a workbook and it has two sheets. Suppose, I want to link A1(sheet1) and a1(sheet2). If I update any of the cells in any of the sheets the other one will be updated automatically. How can this be possible? Or are there any other alternatives?
I'm in need of some VBA code to control the updating of information from 16 active workbooks to a master workbook and vise versa. I would like it on command as it slows down the use of the workbooks when they calculate after every change of data as they are being used. These workbooks are connected over a company intranet and are used 24/7.
The desire is that cells in the master workbook will read specific cells on each of the other workbooks and complete a "map display" of the data. The data is not in a column or row range side by side but scattered across the sheet to form a map when data is entered.
I've tried using code to open and close the workbook with on time events but that hasn't worked.
I have 30 workbooks closed and i want update a cell (f.e. b4) in all the workbooks. Need code to open the files, update the data in that cell and close the workbook.
For worksheets 3 though to worksheet 9 and only columns D, E, F, G, H , I and J, and only rows 4 through to 35 auto update from a source workbook
Note 1: - as you will see in Wookbook A in the attached demo test zip file that row range 4 to 35 varies on each worksheet as the number of towns columns varies on each worksheet. So on one worksheet it might be row 4 to row 12 requiring update whereas on another worksheet it could be row 4 to up to row 35.
Note2: –the source workbook is a closed /non active workbook on another server in my network –path is X/sourcefiles/weeklydate/countfile.xls. In the source workbook the source is sheet 1.
Only update when there is a match of string of the place location name which are ALL listed in column C of the source worksheet –matched to that of string place location names in workbook A in their respective worksheets 3 through to worksheet 9. Then when there is a match – copy the content of the cells that correspond to the place location names in the source workbook (countfile.xls) from the columns D, E, F, G, H, I, and J.
Note 3. The way in which the source countfile works is that each week it will be updated with values/figures starting with column D in week 1 and column E in week 2 and column F in the third week and so on…..In the first week only column D will have values/ figures and the other columns will be empty – and second week only columns D and E will have values/figures – to make the code easy it would be OK to copy across the other columns when they are empty – thus leaving the other columns in workbookA also empty. So in week two when workbook A is opened and is updated from the source file with values/figures for workbook A’s columns D and E of worksheets 3 through to 9 the other columns F, G H, I and J on those worksheets would have only be empty cells or just not updated at all –as the source file at that time would have had only two weeks of figures entered.
Also copy across the column headings in row 4 for columns D, E, F, G, H, I , and J as those headings may change as they are dates.
The final bit that is important part of this is that as worksheet A is updated the formula in column K it will need to auto update as well as it is the initial figures in column D minus the figures in the most recent column updated – so if column G is updated today the formula needs to be =D5 – G5 and =D6-G6 and so on whereas when updated next week the formula would need to change to =D5 – H5 and =C6-H6 and so on.
I have a report that I pull that I pull fairly often that is in this format and shows which footage of products each store is getting (out of over 1800 stores)!
Above is the format that it comes back as. And here is a spreadsheet that shows what steps I take to find correct values in detail.
So each FTG has an ID# and Desc. The ID is in text format and each ID is seperated with a comma, no space. Description also. Date is seperate by a space and comma. Stores change footages a lot so I want to find out which footage is effective today (1/27/2014) For ex: Store 63 would have the 5ft effective right now because we are between 5/23/08 and 5/22/14. So each ID# and Ftg Description is in the same order as Date.
When I have hundreds of stores, it is difficult to go through and get each one (even with the way I've been doing it.) But my ultimate goal is to create a macro to put only the current footage ID#, Desc, and Date in Columns C,D,and E. I'm not sure even where to start with doing a macro.
I usually just find the store with most ftgs, count them, insert that many rows after ID and Description columns, then do a text to columns (comma, delimited), sort by 2nd date column (so they all come up top) and then manually go through them and delete unneeded columns once I have them all.
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
I would like to select all cells in column A that begin with the text "SP". Some cells will be contiguous but others will not. For instance in one case, I would like the macro to select cells with the text "SP" which would result in cells A1, A2, A3, A10, A15 being selected. I am working on building a macro that will then do other things to these cells/rows so this is the first step.
The below code will select the first cell with "SP". How would I alter this code to only search Column A and select multiple cells? or totally different code.
Code: Sub test() Dim r As RangeSet r = Cells.Find(what:="SP", LookIn:=xlValues, lookat:=xlWhole) If Not r Is Nothing Then r.Select End Sub
I have three cells where a user will input data, in some cases (2T Weld Condition) they will only enter in B12 and C12, but in the case of a 3T weld they will also enter data in the D12 cell. I then use a formula to check for the thinnest material and that is entered into another cell with a formula, B14. I then need to check the value in B14 to verify if it is above zero, but below 0.65 (mm). If it is then I would like to have a message appear on the screen notifying the user that they are outside the acceptable range.
I cannot figure out how to use the information in cell B14 because it is a formula and my code only works with a direct value. The code I am using works if I point to one of the three input cells, B12, C12 or D12. How do I use the information in B14 to work with the code below.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$B$12" Then If Target.Value < 0.65 Then Run "MyMacro" End If End If End Sub
I have multiple sheets all of which are identical except for the number of rows containing data. I have been trying to create a macro to update these sheets into one 'Master' sheet but I'm having great difficulties due to me needing to leave Column A and Row 1 blank.
I have uploaded example data of what I am after, sheets 2 - 6 need to be automatically updated to the 'Master' sheet when the macro is run.
I have ~ 300 pivots (one on each tab) all linking to one data set in the same workbook. I realized that I neglected to select the year 2006 in my column label for every pivot table and hoping that there is some way to
simultaneously update all pivots to include 2006 data instead of manually checking the box off one by one.
I'm trying to update a pivot table filter with a list on another worksheet. When I do a record and select two WBS for filter criteria I get the following:
If I entered values 700UY0S1MGL1 & 700UY0S1MGL2 in cells A1 and A2 of Sheet2 in the same workbook, how can I get this code to read that? If I extend the list to include additional items, how can I get the code to read it?
My next question is, in Excel I could enter a partial search (like 700UY0S1MG) in the filter drop down and I could filter on everything with this string. Using the macro it seems as though the full 12 char string needs to be qualified. How would I write a macro to handle this?
The spreadsheet is comprised of 4 sales data sheets, one for each store. Each of these sales data sheets runs several pivot tables (One for dept sales, one for waste, one for sales on Selected UPCs etc) and I used to have 1 copy of each pivot table for each store (ie 24 pivot tables). Now I have found a way to have only 1 copy of each PivotTable which changes based on which store is selected using the following code:
I have a form (the main one) which accesses a second form, which accesses a third form. All forms have a combo box, control button and a text box.
The items selected in the control boxes are entered into cells (the base cells) in the spreadsheet, via “Control Source”. The text boxes access these cells and show the selected items, which are then copied to other cells via a macro on activating the control button in the main form.
The main form stays open while other items are selected and transferred. Some of the items may not be changed (reselected) as they may be common. The problem is that after a number of items have been selected and transferred, the base cells for the second and third text boxes do not update after a selection from the combo boxes, and they continue to show a previously selected item.
The problem can be solved by closing the 2nd and 3rd forms and starting again. What can I do keep the cells updating without closing the form down?
in A1 there will be a box with LinkedCell set to A1 and ListFillRange set to B1:B5. I now want a similar box in A2, with A2 as LinkedCell. However, when I copy paste the box in A1, it still refers to A1 and B1:B5 (the last part is ok). I can easily change A1 to A2 by just changing it in the properties, but the thing is that I also need these boxes in A3:A100. Someone else helped me out by writing some code, but this is not working correctly yet, probably because I'm doing something wrong.
Also, the ListFillRange might expand in the future. Therefor I would like to know if its possible to select the boxes in A1:A100 and change the ListFillRange to B1:B6 for all at once, or even have a piece of code attached to a command button that recognizes the expanded range and updates it.
I couldn't attach the file because it was to big, therefor I uploaded it with yousendit: [url]
So in short: I would like all the comboboxes in column E to be linked to the cell underneath and have and option to adjust the listfillrange. The same for column F, but for this one the listfillrange needs to be O8:O11.
I am creating a budget spread sheet, where a different sheet is used for every month.The months are divided into weeks of the year (week 1, 2... 52), but it also includes weeks where only a few days of the month occur (eg. Feb 2012 - week 1 includes 30 and 31 of Jan, then 1, 2, 3, 4, 5 of Feb and week 5 includes 27, 28, 29 of Feb and 1, 2, 3, 4 of March). Now, since week 5 of January and week 1 of February will be the same, I would like to link those cells, so if I was to change the cell value in January, it automatically changes in February. The issue is, that I also want to make it so that if I am to change the cell value in February, it alters the cell in January (so cell F33!Jan = F33!Feb and F33!Feb = F33!Jan).
I am trying to create a macro that will create a number of check boxes, which are linked different cells. I have had some success in creating multiple check boxes and having them at the destination I want the problem is that instead of linking to different cells they are all linked to the same cell. I have attached a sample workbook SAMPLE.xlsx
Here is a project I can’t seem to do on my own if you can point me in the right direction I would be grateful! here is the best suedo code to describe the needs of the script:
In the open workbook named MASTER, on Worksheet named -MASTER- ( Let’s refer to this all as just MASTER)
(In production, the name of this workbook will be an account #_ date, and the worksheet will be a date)
For each numeric value in row 6 (we’ll call these values AD###) of MASTER
'*****Part one of routine*****
Search directory "H:AccountingAdvertising Accounts" for workbook named AD### AX.xls
(Note the AX suffix of the file name) If match is found open workbook and proceed to Part two
If match is not found, goto Private Sub AD_MISSING
