I have faced a need to update several worksheets with the same format at once, like with copy paper, when i enter data in the first worksheet.
I have pre made worksheets that are identical by format.
There are probably many way to achieve what i want, but i need to find the easiest, less memory consuming method to do it.
On Event open workbook (wookbook A)
For worksheets 3 though to worksheet 9 and only columns D, E, F, G, H , I and J, and only rows 4 through to 35 auto update from a source workbook
Note 1: - as you will see in Wookbook A in the attached demo test zip file that row range 4 to 35 varies on each worksheet as the number of towns columns varies on each worksheet. So on one worksheet it might be row 4 to row 12 requiring update whereas on another worksheet it could be row 4 to up to row 35.
Note2: –the source workbook is a closed /non active workbook on another server in my network –path is X/sourcefiles/weeklydate/countfile.xls. In the source workbook the source is sheet 1.
Only update when there is a match of string of the place location name which are ALL listed in column C of the source worksheet –matched to that of string place location names in workbook A in their respective worksheets 3 through to worksheet 9. Then when there is a match – copy the content of the cells that correspond to the place location names in the source workbook (countfile.xls) from the columns D, E, F, G, H, I, and J.
Note 3. The way in which the source countfile works is that each week it will be updated with values/figures starting with column D in week 1 and column E in week 2 and column F in the third week and so on…..In the first week only column D will have values/ figures and the other columns will be empty – and second week only columns D and E will have values/figures – to make the code easy it would be OK to copy across the other columns when they are empty – thus leaving the other columns in workbookA also empty. So in week two when workbook A is opened and is updated from the source file with values/figures for workbook A’s columns D and E of worksheets 3 through to 9 the other columns F, G H, I and J on those worksheets would have only be empty cells or just not updated at all –as the source file at that time would have had only two weeks of figures entered.
Also copy across the column headings in row 4 for columns D, E, F, G, H, I , and J as those headings may change as they are dates.
The final bit that is important part of this is that as worksheet A is updated the formula in column K it will need to auto update as well as it is the initial figures in column D minus the figures in the most recent column updated – so if column G is updated today the formula needs to be =D5 – G5 and =D6-G6 and so on whereas when updated next week the formula would need to change to =D5 – H5 and =C6-H6 and so on.
I have a weekly report which lists items and their available date. This list is always changing - new items added, old items removed. These items are required for 4 different projects and the item listed says which project the item date is for. There is also the same item across different projects which also have different dates which also appear and disappear each week depending on requirements.
I want to be able to capture the date for each of the items per project per week. Ultimately, I want to be able to track the movement of the date per item per project. I have attached a sample of how I want it to do.
I have a userform I attached here with 3 combo boxes where a user can pick districts and schools, etc. When they click ok, the various tabs in this macro enabled workbook will "refresh" with the metrics for that entity)combination of picks from form) across the board. Each tab will have multiple pivot charts/tables so the filters will need to be addressed. I've been looking for code to kind of match this scenario. I've seen some that kind of in the ballpark, but due to the size and complexity, I suspect this will be extensive, right?
Parameter Selection.jpg
I have 2 nearly identical workbooks and I need to update historical data from the old workbook into the newer one.
My current Coding Snippets that I want to use look like the following:
Code:
Sub UpdateWorkbook()
Dim ws As Worksheet
Dim r1 As String
Dim r2 As String
Dim r3 As String
Dim r4 As String
Dim r5 As String
Dim r6 As String
[code]....
Now, this code isn't working I suspect because the Copy and PasteSpecial Functions don't work the way I wish to.
I have one excel workbook which contains employee cosolidated data (Master File).From Master file i want to update many employee individual files.
eg. in my master sheet i have 10 columns basic salary,fixed allowances,variable allownces etc.
Same components i have in employee individual file, but in diffrent rows.(all the components n one column).
I need a macro which can identify those column names and employee name file and update values as per master file.
Need MACRO to search a workbook with multiple worksheets?
View 9 Replies View RelatedI'm trying to do some averages for a year to date "cover" sheet. Worksheet 2 is Jan, Worksheet 3 is Feb, etc..through December. Worksheet 1 is the year to date averages. My data is a formula on each worksheet in cell B22, I thought I had the function written correctly however Excel won't take it:
=AVERAGE(IF(January!B22,February!B22,March!B22,April!B22,May!B22,June!B22,July!B22,August!B22,September!B22,October!B22, November!B22,December!B220, January!B22,February!B22,March!B22,April!B22,May!B22,June!B22,July!B22,August!B22,September!B22,October!B22,November!B22 ,December!B22,""))
There are blanks,of course, until each month is filled in. Could it be because the number that is in B22 on each worksheet is the result of a formula instead of typed number
I have a task to complete that requires me to extract worksheets from hundreds of workbooks and consolidate them into one "master" workbook. Out of the hundreds of workbooks, there is only one worksheet that I need to extract from each. The worksheet's name is "CostData". Once I have all the worksheets in one workbook, I will have to create buttons that will be able generate reports and charts based off the data in the worksheets. This will assist in determining cost comparisons, trends, and predictions. I am sure something like this has been done before, so can someone please help me out! Is there any code out there that can do this?
View 9 Replies View RelatedI would like to be able to use VBA to add a total amount from different worksheets. What I have attached is a copy of my workbook. It is a blank PO and at the bottom is the word total. Is there any way that I could use VBA or an add in to be able to sum the numbers that are adjacent to the word total on separate worksheets?copy.xlsm
View 2 Replies View RelatedI have about 30 Excel files, each with multiple tabs. Each file has a tab called "Invoice." I would like to create one workbook with all 30 Invoice tabs. As of not I am manually copying and pasting, which takes a while. There has to be an easier way, and I found this VB script to combine entire workbooks.
Is there any way I can run this and get just that Invoice tab and not all tabs on all files?
Sub GetSheets()
Path = "C:UsersdtDesktopdt kte"
Filename = Dir(Path & "*.xls")
Do While Filename <> ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub
I am trying to optimize my code below. It works but it is soo slow, it seems to slow down on the array copy and paste special areas. I believe this is because its doing a cell to cell paste method. These sheets have data as well as graphs that i want to retain on the new sheet, but i could select ranges for each each if that would speed up this procedure.
Code:
Sub CreateDataSheet()
Dim ws As Worksheet
Dim sDataOutputName As String
With Application
.Cursor = xlWait
.StatusBar = "Saving DataSheet..."
.ScreenUpdating = False
[Code]....
I have groups of folders that I need to extract "Sheet2" from each workbook and assemble them into one workbook. Along the way I want to rename the sheets to the file name (-xls). I have assembled this code so far but it is broken
Code:
Sub CombineSheets()
Dim sPath As String
Dim sFname As String
Dim wBk As Workbook
Dim wSht As Variant
[Code]....
I am trying to find a formulae that will sit in a summary sheet and lookup all of the worksheets in a workbook ( approx 80) for a particular individual's name and calculate the total amount paid.
The spreadsheet lists cash amounts by person for each week of the year. the individuals change, as they come and go during the year but the format of the spreadsheet remains the same.
I have attached the summary sheet and a few of the additional sheets. My formulae have fallen apart as I have been adding each person in manually, but I hope it will still be clear.
I am trying to change the page set up setiings to fit to 1 page for 56 worksheets within a workbook.
View 7 Replies View RelatedI have a workbook that has five worksheets listing warehouse inventory items. One worksheet for 2013, 2012, 2011, 2010 and 2009. In column b of each worksheet is a column B with a heading of "Item Number". There are hundreds of item numbers on each worksheet.
I would like to be able to find and highlight item numbers that appear in multiple years. Preferably color coded showing appears in five, four and three years. If that's too difficult than just items that appear in all five years. I tried conditional formatting, but have been unsuccessful.
Lastly, is there a way to list any duplicate item numbers on a new worksheet.
I have a userform which loads the data into a worksheet named "Data" which is being used as a database for an event scheduler. I also load a calendar from a worksheet named "Month" so I need the information from the userform "UForm01" added to 2 worksheets.
The userform adds a series of textboxes to worksheet "Data" in the first open row. I also need certain textboxes from the Userform to be added to another worksheet to populate the calendar.
See the code below.
[Code] .....
I have five excel separate excel files containing values covering more than 500,000 rows each. I want to put then in a single excel workbook without tedious work of copy/paste to sheets of this workbook.
View 2 Replies View Relatedl need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
View 9 Replies View RelatedI have a master workbook with 20 worksheets. 5 worksheets in the worksbook are distributed to field reps, but the remaining 15 worksheets are not. What is the best practice for receiving the 5-worksheet workbook from the field rep and importing the data into the 20-worksheet master workbook? If I merely use Copy Sheet I am able to copy the worksheets into the master workbook but then I have to remove the pathname references in each of the copied worksheets in order to map the data in the master workbook - which is quite cumbersome.
View 9 Replies View RelatedI have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
View 2 Replies View RelatedI inherited a price list workbook made up of multiple worksheets (some 30 pages). Each year the new prices (including % increase) are calculated by a formula in the row below each price (100's of rows and formulae).
Thus:
C1 might say £10
D1 says =C1+(C1*2.5%) £10.25 (it actually does some rounding too)
etc
It may seem odd having both rows but MD can see the before and after. The new price 10.25 must however be manually copied to C1 to avoid circular referencing and then D1 row hidden. Very laborious to repeat 100's of times.
Is there a way of first copying the entire workbook for the new year (easy) then by means of a macro looping through each formula cell of all sheets in workbook 1 and pushing the result to the new workbook and to the correct sheet and then to the same location but to the cell above. e.g. pushing £10.25 from D1 of sheet 1 workbook 1 to C1 of sheet 1 workbook 2 to become the new price for the coming year?
Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.
im working on a excel 2010
This is what i got for the moment..
Sub LoopThroughDirectory()
Dim MyFile As String[code].....
I have what is probably a simple request to all the VBA experts out there, and simply want to take a template sheet in a workbook and copy it across to 100 sheets numbered/named 101 -200, and add the name of each sheet as a text reference, e.g. sheet name 101 will have a cell within the worksheet that refers to sheet 101.
I have attached a simplified spreadsheet which indicates what i'm trying to achieve.
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
=SUM(IF(AND([L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4>=182,[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet26!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet27!$I$4
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I am trying to write a Macro so that my Mastersheet has a command button, that when clicked, will update itself with information from 5 other worksheets. I only need it to update new data and not data that is already there and i need it to copy it into the mastersheet in the next available blank row.
I am working with a mastersheet created by someone else and I have created the 5 worksheets. All the columns are exactly the same in both the worksheets and mastersheet. The mastersheet has 2 sheets, the front sheet ("Front Page") has the command button and the second sheet ("Activity Log") is where i want the new data to appear. I have very little knowledge of VBA, I have recorded a few macros and have used that to create the code i need to open a closed worksheet but I dont know where to go from there.
In order to do the tests, I'm using 2 simplified workbooks (test_copy and test_paste).
What I'd like to be able to do, once I click a button UPLOAD (creating the button isn't the problem), is to go to the first cell from workbook test_copy, check if that code is already on test_paste and if not add it to the bottom of the list, repeating the same cycle for each code on the workbook test_copy.
The orders of the codes might change on both workbooks differently depending on the way the columns are sorted. That is why I believe that for each code in test_copy I need to check the entire column in test_paste to check if the code already exists.
At the end of the routine, on the example below, we would have the codes 2670, 2676 and 2626 added to the end of the list on test_paste.
test_copy
Excel 2012
A
1
2684
2
2783
3
2669
[Code]...
I have two spreadsheets which carry the same information in three cells. Instead of just placing a link, =B2 etc., I would like to have the cells linked to each other through code.
For the one sheet I can use this with no problem, but as soon as I place this worksheet change event in the other sheet but reverse the cells references Excel gets unhappy.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Set rng = Target.Parent.Range("B2, M2, N2")
[Code]....
Any proper way to update a cell no matter which spreadsheet the change takes place?
Sheet1 >> change is made to cell B2 and that same value is applied to Sheet cell C4.