How To Update Multiple Worksheets Based On One Userform
Jul 30, 2014
I have a userform I attached here with 3 combo boxes where a user can pick districts and schools, etc. When they click ok, the various tabs in this macro enabled workbook will "refresh" with the metrics for that entity)combination of picks from form) across the board. Each tab will have multiple pivot charts/tables so the filters will need to be addressed. I've been looking for code to kind of match this scenario. I've seen some that kind of in the ballpark, but due to the size and complexity, I suspect this will be extensive, right?
For worksheets 3 though to worksheet 9 and only columns D, E, F, G, H , I and J, and only rows 4 through to 35 auto update from a source workbook
Note 1: - as you will see in Wookbook A in the attached demo test zip file that row range 4 to 35 varies on each worksheet as the number of towns columns varies on each worksheet. So on one worksheet it might be row 4 to row 12 requiring update whereas on another worksheet it could be row 4 to up to row 35.
Note2: –the source workbook is a closed /non active workbook on another server in my network –path is X/sourcefiles/weeklydate/countfile.xls. In the source workbook the source is sheet 1.
Only update when there is a match of string of the place location name which are ALL listed in column C of the source worksheet –matched to that of string place location names in workbook A in their respective worksheets 3 through to worksheet 9. Then when there is a match – copy the content of the cells that correspond to the place location names in the source workbook (countfile.xls) from the columns D, E, F, G, H, I, and J.
Note 3. The way in which the source countfile works is that each week it will be updated with values/figures starting with column D in week 1 and column E in week 2 and column F in the third week and so on…..In the first week only column D will have values/ figures and the other columns will be empty – and second week only columns D and E will have values/figures – to make the code easy it would be OK to copy across the other columns when they are empty – thus leaving the other columns in workbookA also empty. So in week two when workbook A is opened and is updated from the source file with values/figures for workbook A’s columns D and E of worksheets 3 through to 9 the other columns F, G H, I and J on those worksheets would have only be empty cells or just not updated at all –as the source file at that time would have had only two weeks of figures entered.
Also copy across the column headings in row 4 for columns D, E, F, G, H, I , and J as those headings may change as they are dates.
The final bit that is important part of this is that as worksheet A is updated the formula in column K it will need to auto update as well as it is the initial figures in column D minus the figures in the most recent column updated – so if column G is updated today the formula needs to be =D5 – G5 and =D6-G6 and so on whereas when updated next week the formula would need to change to =D5 – H5 and =C6-H6 and so on.
How to Update the Worksheets field value based on updates done in Main Worksheet. As i have two different worksheets (Which can be even more then 5) and i want to update the Column Field value of "State" in work sheet "B" & "C" based on the updates done in "State" Column Field value in Worksheet A. I just want to update the "State" Column Field value in Worksheet "A" and it should update the "State" Column Field value in Worksheet "B" & "C". Only the criteria to match is Number. Based on number i want to search the values in Worksheet "B" & "C" and want that these values also get updated.
For example I have three columns named Name, City and Telephone.
UserForm1 has three textbox(TextBox1, TextBox2 and TextBox3). All three textboxes data populated from sheet1 (Name, City and Telephone) by selecting a comboBox.
The code is below... and which is working fine.. The problem is in my next code. I am trying to amend data in all worksheets but it is not working.
Private Sub ComboBox1_Change()
Dim strNamedRange As String Dim lRelativeRow As Long
With ComboBox1 If .ListIndex > -1 Then strNamedRange = .RowSource
I have a userform which loads the data into a worksheet named "Data" which is being used as a database for an event scheduler. I also load a calendar from a worksheet named "Month" so I need the information from the userform "UForm01" added to 2 worksheets.
The userform adds a series of textboxes to worksheet "Data" in the first open row. I also need certain textboxes from the Userform to be added to another worksheet to populate the calendar.
I want a summary list of data from all columns of worksheets that contain the target data and only where the value in col D is 1. So, in the attached example, the data to be checked is on Sheet1 and Sheet2 and the result should be shown on Summary sheet. There will be some tabs that don't need to be checked for the data so it's not a case of check all other tabs except for Summary.
I'm trying to sum across multiple worksheets based on a simple condition. I have a time sheet with a worksheet for each week (52 worksheets). I've gone back and added a column to code the type of work done, types 1 - 17. I want to sum the hours of each type across all worksheets. This is what I have that doesn't work:
I have a column where each cell contains the names of a variable number of worksheets in the format ["sheet1", "sheet2", etc. ] without the brackets but with the quotation marks. I would like to have some code that will select all of the sheets mentioned in a given cell. I found lots of threads about selecting an individual sheet based on a cell, but none about selecting multiple sheets. If it is easier, I can change the format of of the cells, or break each cell out into multiple cells in a given row. The best code I could come up with was
Sub Selects() Dim strSht As String Sheets("Criteria").Select strSht = ActiveSheet.Range("L31") Sheets( Array(strSht)).Select End Sub
We are an office furniture company and we want to hold a master list of all stock. The columns we require are:
Product ID Product Description Product Grade Product Price Sold
The Sold column would be a YES or NO answer, and based on that I want the data to split into two additional worksheets, one with all the unsold items and one with all the sold items. So really I need to know how to split the data based on whether the line has a YES or a NO in the sold column.
The data needs to update instantly so if I change a product from unsold to sold it then comes off the current available stock tab.
I have tried to split using KuTool and ASAP Tool but they dont work. They can only split base on #of row. Between each of the group of my data, there is a empty row that split them. I want to split every single row from A:H to a new workbook. Why A:H becuz from A1:A8, the A5 is empty. It has to be in range, specify by me, so if the condition is met as empty from A:H, then split from there and keep going on the whole spreadsheet.
The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)
The tab is selected based on the row Module 1Medication Management Module 2Privacy Module 3Process Module 4Patient Safety Module 5Medical Records Module 6Infection Control Module 7Environment of Care
I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.
I have multiple worksheets with multiple varying columns with varying rows. My one constant is the product_id. I want to merge all worksheets into 1 worksheet based on the product_id's. Here is my example:...............
It has to consolidate all of the column names from all of the worksheets into the final worksheet, then take all of the rows and put the product_id in the product_id column and put the other data under the appropriate columns. Some columns will end up blank where they may be a column in worksheet 2 but not worksheet 1.
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
I have a workbook composed of many worksheets with varying names. Of the 40 or so worksheets, 25 of them contain data that I need to copy and consolidate into a master summary sheet within the same workbook. All of the sheets I need to grab data from have a worksheet name that ends in “(Data)”. All worksheets contain data that starts on the same row (row 8) but the number of rows of data will change daily. When I copy the data range on the individual sheets I do not want to copy the header row. I’ve tried various uses of the offset command with no luck to resize the selected range. I’ve also tried giving each range a named Dynamic Range and referring to this name in VBA code but that didn’t get me very far either. So the flow looks something like this:
1. Find all sheets with name ending in “(Data)” (i.e. “Project X (Data)”) 2.For each sheet found, find the data range and omit the first row of data. 3.Copy selected range. 4.Go to sheet “Master” and find the last row of data. Move down one row to the first empty row and paste copied range. 5.Go to next sheet and repeat.
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
I am trying to write a Macro so that my Mastersheet has a command button, that when clicked, will update itself with information from 5 other worksheets. I only need it to update new data and not data that is already there and i need it to copy it into the mastersheet in the next available blank row.
I am working with a mastersheet created by someone else and I have created the 5 worksheets. All the columns are exactly the same in both the worksheets and mastersheet. The mastersheet has 2 sheets, the front sheet ("Front Page") has the command button and the second sheet ("Activity Log") is where i want the new data to appear. I have very little knowledge of VBA, I have recorded a few macros and have used that to create the code i need to open a closed worksheet but I dont know where to go from there.
In Excel, I have created a userform where a user inputs parameters into various textboxes. A simulation runs based on these user entered values. All the VB code is in this form. There are some textboxes and charts that are supposed to get updated as the simulation runs so that the user can view the parameters change as the simulation happens (it is a "do loop").
Everything is fine except the charts and textboxes don't display the most current value. They display the starting value during the "do loop " execution. Once the do loop quits, they then display the final values and chart.
I have me.repaint and chart.refresh inside the do loop to display the most recent values. none work, as far displaying the most current values.
I have two spreadsheets which carry the same information in three cells. Instead of just placing a link, =B2 etc., I would like to have the cells linked to each other through code.
For the one sheet I can use this with no problem, but as soon as I place this worksheet change event in the other sheet but reverse the cells references Excel gets unhappy.
Code: Private Sub Worksheet_Change(ByVal Target As Range) Dim rng As Range Set rng = Target.Parent.Range("B2, M2, N2")
[Code]....
Any proper way to update a cell no matter which spreadsheet the change takes place?
Sheet1 >> change is made to cell B2 and that same value is applied to Sheet cell C4.
I have a large amount of worksheets that require a formula update. Update itself is simple. Each formula in the cell has to be devided by different cell. My problem is that I have a big number of worksheets to do this in and they are in different workbooks. Is there a faster way of doing it besides manually updating each cell?
We have a tariff table with the following data per row: Area code - Destination name - Price - and some other stuff that is not important. Once or twice a month we receive updates on Price for some destinations and maybe even some new rows with area codes and destination names that we do not have in our table. Can someone help me with a macro that will look into two sheets and do 2 operations:
1) taking as reference the Sheet2 - Column C (Price Tag) will update column C in Sheet1, using the Area Code (Column A) of both sheets as identifier to find to what row will apply the change;
2) if there is a new Area Code - Destination - etc. row that is not present in sheet1, will add it to sheet1
It does not matter to me if will update directly sheet1 or it will write the entire sheet1 content with the updates to Sheet3.
I have a userform for data entry. I am able to make codes for Add ( Add entry to database), clear ( Clear userform ) , Cancel (Exit userform). I have some more buttons and functions to be assigned to them but not able to write code .
Need codes for :
1) Have search box which searches Mat id in the complete database and returns value in the search result listbox. When we click on the result in listbox , the userform values are filled with the values that the mat id has . Then if user wishes he can update teh details for that mat id , and click on update button . the data is updated in the database. Or he can delete the entry from database by clicking on delete button.
2) Have arrows which will navigate through database ( need macros for that ) .
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with: 1. I'd like the UserForm to open when the workbook opens. 2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B 3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
Not sure if I am linking this correctly but here it goes...http://www.excelforum.com/excel-prog...ification.html
This is a previous post link that is now solved but I have a new question based on the code in the post. I would like to know how to add a search and update ability to the user form I have created. I am newb with user forms so I apologize in advance for my lack of knowledge.
And yes I know the way it is set up now it is depositing data in two different locations; this is for a specific purpose.
I have a form that i am using that I would like to update at certain points in the code. I have the screenupdating set to false but it seems that this is keeping the userform from refreshing as well. Is there a way to refresh the userform without turning the screenupdating back on (because the user cannot see what is happening behind the scenes.
