I am using one macro in order to format the huge data and approx. it would take 2 to 3 min to complete the task.
While running this macro there will be more then 10 different sheets will open and close because it takes data from different sheets.
I can use Application.ScreenUpdating = False in order to hide this but along with this user should get initialization tab (we can see while installing any application).
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
View 2 Replies View RelatedI want to require that certain Text Boxes in a User Form have entries and I am coding the message box improperly.
View 7 Replies View RelatedCan you run a macro in an Excel sheet using a button in an acces form? And how do you do it ?
View 2 Replies View RelatedPrivate Sub UserForm_Initialize()
' MsgBox "removing outlines"
'OGA Mechanical Schemtic
Me.Label3.BorderStyle = fmBorderStyleNone '0821-1
Me.Label463.BorderStyle = fmBorderStyleNone 'Nitrogen Purge ORU
'OGA electrical Schematic
Me.Label447.BorderStyle = fmBorderStyleNone 'Hydrogen ORU
Me.Label184.BorderStyle = fmBorderStyleNone '0321-1
Me.Label468.BorderStyle = fmBorderStyleNone 'A301W1...............
I have a user form that builds a workbook from one template sheet and information in a SQL Server database. The template sheet contains 4 charts that are copied to every new sheet in the workbook, then their data ranges are set through VBA code. For a while the code was working wonderfully. All the necessary sheets were being generated and correctly populated.
Yesterday I added a new module to generate another sheet and pull data from the same SQL Server tables. Now if I run the userform it will work fine once and create all the needed sheets, and set all the charts to the proper ranges. However, if I delete all the created sheets and run the form again, I get:
Runtime Error '-2147417848 (80010108)'
Automation Error
The Object Invoked has disconnected from its clients
The error consistantly occurs for the following line of Selection.Copy Destination:=Worksheets("Master").Range("D1")
After the error the selected range still shows up as surrounded by a selection box, but if I change sheets, the box moves to the new sheet. Also I cannot select any new cells in the work book. In order to get Excel to work again I have to End Task from the Task Manager just to get it to close. When I restart Excel and go back to my work book I get the same results, i.e. The form works great once, then Excel dies.
I have tried qualifing all of the objects that can be qualified. I have tried setting all possible varriables to Nothing before exiting my macros. Nothing I have tried, or found suggested so far in the forum works.
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?
I want to require cell entry by users. For example, if a user wants to entry information in cell C1, they must first enter information in cell A1 and cell A2. If there is no information in both of those cells, I want to display an error message to the user indicating they need to first enter information in those two cells.
View 10 Replies View RelatedI have a file with the following sheets: P1, P2, P3, Inventory. This file is sent to different people (users Ab, Ad, An) and P1-P3 sheets are set as "VeryHidden" because we want to avoid for example that user "Ab" can see or unhide certain sheets.
I'm wondering if it's possible to request a password when opening the document then unhide certain sheets according with that password, there will be 3-6 users.
I have many textboxes on a UserForm and the value entered must be 6 numeric digits, how can I do this in my code? I understand how to limit with code to numeric numbers in the Exit event but can't find how to REQUIRE all 6 digits be entered.
View 2 Replies View RelatedI have data like
col A col B col C col D
DLM2.2 kWDLM75 kWDLM55 kWDLM160 kWDLM11 kWDLM1.5 kWRDLM110 kWRDLM2.2 kWRDLM11 kWRDLM55 kWDLM11 kWDLM30 kWDLM45 kWDLM1.5 kWUS40 kVAUS10 kVAFD45 kVAFD45 kVAFD6.4 kVAFD25 kVAFD45 kVAFD11 kVAFD11 kVAFD150 kVAFD10 kVAFD18.5 kVAFD25 kVAFD18.5 kVA
The problem is col B having M type and col C contain their respective ratings. I want summary report.
Rating 2.2 should give me total count, but if you see there are types.
In col A -
DL
RDL
blank cells
so, 2.2 DL = the perticular count
2.2 RDL = the perticular count
Only M type having subtype DL and RDL.
Im col B, there another subtype also like US or FD. For that also particular rating show their exact count.
Is that possible? I want excel formula not vba code.
I've got a table where I want excel to generate the next number. With the following table excel must generate an invoice number (column B). I've got the formula to work correctly until a payment is done as shown in B12,B13 and B14. I need a formula to lookup the maximum invoice number (SC1-0007) and in cell B15 the serial number SC1-0008 must be shown. [URL]
View 1 Replies View RelatedI would like the user to enter a password to unhide a column. I am aware of how to use a password to unhide a worksheet, but now I would like just a column.
View 9 Replies View RelatedVBA automation -
Excel added the formula - but they all return "Not Found". After the VBA automation - I visit each cell, see the formula is correct and then press Control +Shift + Enter; then the correct value displays! Of course, the curly brackets also appear in the formula bar. In VBA I tried to use the:
objXL.ActiveCell.FormulaArray = "=IF(ISERROR(INDEX(PositionDataSell!$T$2:$T$505,MATCH(" & lngContractID & "&" & strQuote & strConCat .....
The Excel Formula bar for the cell is just empty (blank)
Using only the Formula property:
objXL.ActiveCell.Formula = "=IF(ISERROR(INDEX(PositionDataSell!$T$2:$T$505,MATCH(" & lngContractID & "&" & strQuote & strConCat .....
The correct formula is created in each cell, but. Until I visit that cell and use the Control+Shift+Enter - the lookup will not work. It is proof that the right formula is there, without the curly brakcets.
In Excel - my vba code successfully constructs these formulas: In essence: It checks for an error and prints "Not Found" if no match is found in the check. It test for two values in a row - matches them to two columns on a row in another worksheet, and returns a third value for the matches of the same row.
I’m having problems linking data from various worksheets to one master worksheet, all in the same workbook. The workbook contains swimmers PB’s (personal best times) for each stroke and after each gala the swimmers new time is entered onto the worksheet. The worksheet data is then sorted so that the fastest swimmer is at the top.
The master worksheet contains all swimmers by name (alphabetically) and their best times for each stroke, what I am trying to do is have the master worksheet update automatically when I enter the swimmers new PB’s in the individual stroke worksheets, this works when I use ’Paste Special’, but when I go to sort the data with the fastest swimmer at the top, the data in the master worksheet does not reflect the correct times.
How can I require 2 numbers before a decimal in data validation? I have a formula to require at least to characters after.
I'd like to require the user to enter at least ##.##
I want to require the user of my Excel Userform to input a number greater than 100. How do I do that?
View 4 Replies View RelatedI have a report of users and thier roles
User# User_Christian User_Surname Role
1 bob smith operator
1 bob smith supervisor
1 bob smith warehouseman
2 john stone operator
2 john stone gunman
5 george brown Foreman
What Im after is:-
a matrix with unique Role list across the top
Unique ID & Name down the side
(I can do all the above using recorded macro's)
but the clever bit I cant even start to work out is how do I get matrix populated from the list?
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I have a spreadsheet (don't we all) that is currently password protected - you double click the file and need to input a password before it will open.
I have some code that will protect a workbook from changes and only unlock for specific usernames, and i wonder if there is some code that will do the following:
-User opens spreadsheet
-VBA looks at the username trying to open the sheet, for this example the username is Paul.Smith
-Paul.Smith is not one of the people who should have regular access to this sheet - so the VBA requests a password from him prior to opening the sheet.
My username opens the same sheet (galvin.paddy), VBA see's that my name is one of the 'Authorised Users', removes the password and opens the sheet for me ready for use.
Code:
' write data to txt file
For j = 1 To 3
For k = 1 To 21
Print FNum, OPTOarray(j, k)
Next k
Next j
I am writing an Array to a text file but I keep getting an error that the Print statement requires a suitable object. I tried Debug but all this did was put the data into the immediate window and created a file that was empty.
"????.Print FNum, OPTOarray(j, k)".
The data in the immediate window is correct but when you open the text file with notepad there is nothing to be seen.
Can i run a macro by just the pointer going over it.
View 9 Replies View RelatedI'm trying to get a macro to run when the user presses the save button. I have the following code:
[Code] .......
This code is supposed to apply the TRIM function to every worksheet in the workbook when the user presses save, and the saves the results. I understand the Private Sub bit is the code to have the macro run during the save, but for some reason the macro itself isn't actually running. I'm not getting any error message, its just that the cells which should have the TRIM function applied to them aren't being corrected.
I have a macro that takes about a minute to run. I would like to add a progress bar to appear once the macro starts running. There are no loops in the macro. What are my options?
View 3 Replies View RelatedI have 3 different sheets with a private sub on each all labelled
Private Sub CommandButton1_Click()
The macro's runs fine on each page.
I want to put a macro on a separate sheet that i can run each of those macro's
I did initially copy the original private macro and change the
Private Sub CommandButton1_Click()
to
sub report()
But I couldn't do all 3 in the same manner. i did change each name to something different... the other 2 subs did run, but they didn't do anything except put the massage box on the end saying that "the macro has finished".
The private macros are on sheets 26, 28 and 12.
I have 7 different workbooks as part of my daily routine.
At present the first workbook is opened via the task scheduler, and the macro is run using the following code
[Code] .....
This then opens the next workbook and closes the current one. The next workbook then runs its macro again from a timed call
[Code] ...........
This repeats for 7 workbooks. The problem is, if a macro overruns - the whole schedule is out of sync when macro's are called depending on the time. What I would like to do, is link each macro by calling for the next one, and closing the current workbook. However, when i have tried to do this, the macro has always stopped when the workbook has been closed - the next macro doesn't run.
Below is the entire code that I am using. It is a simple routine which checks whether a part has started its release process or not, based upon dates. The code works and does what I want.
The problem that I have is that it is very slow, for example it takes 35 seconds to go through 530 lines items. In my (limeted) experiance, based on other VBA doodlings this slow.
Is it possible to run a macro from an IF command?
View 9 Replies View RelatedI already have a macro made named (PowerPoint) that is saved to the wookbook. I am looking for a way to have this run every 20min. I have tried several differnt things and it did not work. Here is one I found online. I only need it to run when it is open and every 20mins. as long as I have it open.
View 3 Replies View Related
