I have many textboxes on a UserForm and the value entered must be 6 numeric digits, how can I do this in my code? I understand how to limit with code to numeric numbers in the Exit event but can't find how to REQUIRE all 6 digits be entered.
View 2 Replies
I want to require the user of my Excel Userform to input a number greater than 100. How do I do that?
View 4 Replies View RelatedI am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!
View 4 Replies View Relatedbelow code. I need to change this code to accept 12 digits.
View 13 Replies View RelatedI've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
i need to format my numbers in the following format
10,00,000.00
the first three digits will be separated and then subsequently 2 digits
I have the following working great, but would like to see it refine a little, as the data vlookup is 6 digits, but i only needs the last 4 digits is enough for me to work, my question is how do i go about adding that to the following function i have implemented and working fine.
=IF(ISERROR(VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)),"",VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
Want to tab to next textbox in a userform.
Sample workbook has a userform with 4 textboxes.
When I enter something in textbox 1 and then try to tab to the next box, it tabs within the same box.
Attached sample : Form1.xlsm‎
i have a tabbed userform, that has 13 text boxes on each ,
how can after i have updated one tab unload to a specific cell in excel ?
textbox1 i need value when i "Unload" to b $F$6
textbox2 will be $F$7
textbox3 $F$8
etc etc
but i have no idea how to do this , i have a cmdbutton on bottom ready to unlaod to excel , can anyone start me off on right tracks
also is there a way to when this sheet is opened this userform is shown
I am editing a wine database which contains a vast amount of data, one column has the wine name and sometimes the vintage year in the begining or at the end of the cell. Sometimes the year is made of 2 digits (03, 05, ..) or 4 digits (1978, 2004, 2005, ...).
Is there a way to remove this vintage year form the string?
to make matters worse, there is often a single quote/apostrophe in front of the vintage year, which is driving me mad as 98% of the time it is one of these hidden ones that cannot be deleted using the find/replace function.
examples are like below:
De Wetshof Finesse/Lesca Cahrdonnay ‘07
De Wetshof Sauvignon Blanc ‘07
Lord Neethling Cabernet Franc 2002
Lord Neethling Pinotage ‘01
Bouchard Finlayson Tete de Cuvee Pinot Noir ‘07
Jacobsdal Pinotage 1994
Zondernaam Sauvignon Blanc 2007
Tokara Red
1976 St Emilion
03 Tokara rose
Plasir de Merle Cabernet Sauvignon ‘05
DuToitskloof Pinotage/Merlot/Ruby Cabernet
1999 Tradition Juracon 375ml
I have been searching the Internet for the past 2 days without luck on how to delete the end of string vintage year.
I have had some luck with the left side, as in:
=IF(ISERROR(VALUE(LEFT(B2,SEARCH(" ",B2)-1))),B2,MID(B2,SEARCH(" ",B2)+1,LEN(B2)))
As I am not an expert with Excel, I have no idea on how to use VBA (every time I have tried even basic things, I failed) nor even sure how the above funtion works (found it on another site).
I thought I could acheive my goal in two steps, first removing the left side vintage and use this partial result with the RIGHT equivalent funtion, but it simply is not working!
I am editing a wine database which contains a vast amount of data, one column has the wine name and sometimes the vintage year in the begining or at the end of the cell.
Sometimes the year is made of 2 digits (03, 05, ..) or 4 digits (1978, 2004, 2005, ...).
Is there a way to remove this vintage year form the string?
to make matters worse, there is often a single quote/apostrophe in front of the vintage year, which is driving me mad as 98% of the time it is one of these hidden ones that cannot be deleted using the find/replace function.
examples are like below:
De Wetshof Finesse/Lesca Cahrdonnay ‘07
De Wetshof Sauvignon Blanc ‘07
Lord Neethling Cabernet Franc 2002
Lord Neethling Pinotage ‘01
Bouchard Finlayson Tete de Cuvee Pinot Noir ‘07
Jacobsdal Pinotage 1994
Zondernaam Sauvignon Blanc 2007
2003 Tokara Red
1976 St Emilion
03 Tokara rose
Plasir de Merle Cabernet Sauvignon ‘05
I have been searching the Internet for the past 2 days without luck on how to delete the end of string vintage year.
I have had some luck with the left side, as in:
=IF(ISERROR(VALUE(LEFT(B2,SEARCH(" ",B2)-1))),B2,MID(B2,SEARCH(" ",B2)+1,LEN(B2)))
As I am not an expert with Excel, I have no idea on how to use VBA (every time I have tried even basic things, I failed) nor even sure how the above funtion works (found it on another site).
I thought I could acheive my goal in two steps, first removing the left side vintage and use this partial result with the RIGHT equivalent funtion, but it simply is not working!
Does anyone have an idea on how to help with this?
Ideally I would love to cut the vintage year, whether 2 or 4 digit, whether on right or left of cell and paste it in another cell, so to avoid manually doing it.
However, this is surely too complicated to do, so iwould settle with just deleting the vintage year and manually typing the vintage in another cell.
i have couple of textbox in my userform and i want to limit them for 7 number and one letter e.g. 7777777X.
View 2 Replies View RelatedHow do I get the text to wrap inside the text box? I have the Wordwrap property of the textbox = True.
View 6 Replies View RelatedI have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
View 1 Replies View RelatedI'm having a problem referring to the value in my text boxes. I'm trying to refer the value in those to certain columns and rows that will be deleted after.
[Code]......
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
I am creating a userform in vba with textboxes. Input (from user) into the textbox is copied to a worksheet in the workbook.
I one text box users will need to type numbers and in another they will need to type letters.
Can the textbox be formatted so it will only allow a number?
Can the text box be formatted to only allow text?
I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.
View 9 Replies View RelatedI have an userform say frmNew. In the form, I have three textboxes: txtCost, txtRate, txtSale.
The following two boxes are filled by a user:
txtCost contain the Cost of an item (numbers)
txtRate contain the % Rate (3 character), i.e. the txtRate can contain only A,B,C,D,E,F,G,H,I and J. The corresponding value is 1,2,....9,0 respsctively.
If a user enters any numbners or characters other than A,B,..J, a msgbox should popup with a error message.
The value for txtSale is generated by the Macro i.e. txtSale = (txtCost + (txtCost * txtRate)).
Could anyone offer advice on how I would go about accomplishing this task? I'm trying to format two textbox fields on my userform that when the user inputs data into it, it would automatically show the "symbols, dashes and/or spaces accordingling".
The first textbox field (TextBox9) I need to end up looking like this, with the numbers and/or letters changing by user input.
example: (MI) A000-000-000-000
The next textbox Field (TextBox10) I need to end up with this type of result:
example: (MI ID) A000-000-000-0
I was trying something like this but I'm not familiar enough with the formatting symbols to accomplish this task.
I am trying to update a Textbox from two Listbox's and several Textbox's as the user enters values (or double clicks the textbox for a value). (DoubleClick code is completed). I have ten textbox's to enter data into (or double click for prior data stored in the registry). Two Listbox's requiring one selection each. The last textbox (textbox11) produces the text as it is being entered from the previous ten, I currently enter the data in a specific order to build my string, which I want to stick to. If the user has entered the wrong data in any of the active textbox's I would like to be able to update the string shown in textbox11 without losing any data from the string.
Hence where my brain cells are popping. My current code (laughing is a pre-requisite). Is in the next two posts due to character length restrictions (no dis intended). Attached is a screen shot of the userform. In the textbox labeled "FCF" all the data you see that is not in any of the textbox's or listbox's is written in from code.
I'm a bit stuck with one of my userforms. I have a username textbox on my workbook logon screen. I have put a max length on the textbox to 7 characters. I have also added a bit of code which stops the user from entering anything less than 7 characters (once the commandbutton is clicked, a msgbox comes up), and the textbox will show text in upper case.
What I would like is a way to "format" the textbox. All of the usernames will be in the following format: BBAAA11. The first 2 characters will always be "BB". The 3rd, 4th and 5th characters will be any combination of letters (for example... "CAM", "EAL", "BEF"). Finally the last 2 characters will always be any combination of 2 digits (for example... "76" "24", "00").
If someone could provide me with some code which will not allow the textbox to type anything other than the specified format, or for a msgbox to appear once the commandbutton has been clicked to say that the incorrect format has been entered, I will be most grateful.
