I need to compare two tables in two different worksheets (A and B) and update the weekly changes (income and sales) from B to A. I have been using an Index(Match) formula which has been working perfect. I am however forced to update to a macro.
The worksheets are identical and each item is identified by a unique ID.
Any ideas in exchange for a 6-pack Budweiser?
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
******** ******************** ************************************************************************>Microsoft Excel - Book3___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1ABC 2464104641046410 32081500002081520815 44062000040624062 51521259171521215212 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
What I am doing is comparing Zip Codes from 3 Data Bases against each. If all 3 DB's are equal then I need a responce of "Ok", if there is a difference in any of the 3 then I need a "Bad". I know this is simple, but Data Base A can have the Zip Code as all 9 numerals or just the first 4. It only depends on who entered the Zip whether or not the trailing 4 numerals were entered or the were entered as all zeros. To throw another wrench in it, if the leading numeral is a zero, all three DB's will drop the leading zero.
I want to do all of this in 1 Function, not 5 fromulas.
What I need is for Database A, test the cell for Length and if it is 8 or 9 numerals then remove the right 4 to only leave the left 4 or 5 numerals (4 if it had the leading dropped 0) and then do a simple If A=B and A=C Then "Ok" Else "Bad".
I have this code which looks information in a table. The problem is that the table is getting every time bigger.
Here the code:
VB:
With Worksheets("Sheet10").Cells(9, 3).Resize(, LastColumnf - 2)
.Formula = "=IFERROR(CONCATENATE(VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,3,FALSE),""."",
VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,2,FALSE)),"""")"
.Value = .Value
End With
How can I write $A$10:LastNewRow... Another problem rises here, LastNewRow might end up being the oldLastNewRow, i think. But maybe since it is getting bigger, there is no problem, I don't know.
Instead of having a static reference like $C$550 I would like to have a dynamic one.
I'm trying to make two identical worksheets in a workbook. I would like the second sheet reflect all the changes made in the first one. I thought I would simply use = but it doesn't work correctly if I add or delete rows. If I add a row between row 1 and 2 in the first sheet the formula in row 2 in the second worksheet changes from =sheet1!A2 to =sheet1!A3. The result is the same if I use absolute references which suprised me. I want the formula in row 2 to stay =sheet1!A2 whatever happens on the first sheet.
I don't care about formatting, just data are important.
The reason I want the same data on two worksheets is that the second sheet will contain some more data that should not be visible to everyone. I want to protect the second worksheet and require a password to unhide it.
I have never used charts in excel unfortunately. I just finished watching a few tutorials but still a little confused. I have a WS with a list of items I want to make various charts of how do you make a chart that adjusts when new items are added? (thus dynamic data) Do you need a macro to do this or is it just standard by defining a range within that sheet?
View 7 Replies View Relatedwhy this isn't working?
=SUM(OFFSET(A4,0,3,1,(LOOKUP(9.99999999999999E+307,4:4))))
I would like to update a chart after I have updated the underlying data just by clicking a button and displaying the updated date in the chart. Does anyone know how to do this? Currently I am having to manually click on the graphs line in the chart, which highlights the columns data, then manually extend this for the chart to update. And then I am manually typing in a date cell in the chart. There MUST be a cool way to do this.
View 6 Replies View RelatedI've developed a spreadsheet that shows what errors people made in their spreadsheets. I compare cell A1 in spreadsheet 1 (original) against cell A1 in spreadsheet 2 (final), in spreadsheet 3. Spreadsheet 3 shows a "-" if the cell they wrote was OK, and shows the new, correct value if they made an error, as follows:
=IF('Final'!A5='Original'!A5, "-",'Final'!A5)
The problem is, this only works if I take the original spreadsheets, which contain formulae in each cell, and paste them into a new spreadsheet using paste values.
Is it possible for the IF function to search the formula in a cell, and not the value?
I have attached a workbook.
I have a calculated value in H2. This value will correspond to values in the table provided. This value is dynamic and will change based on criteria that will be added.
The value H2 is a combination of to "letters" D1 and A2 or A4 and B1 i.e. trace back where the intersection of H2 occurs within the table
In Cells A8 and A9 I am trying to represent which combination of letters will result in an intersection of the value H2. In the example provided it is C and A.
What i would like to do is have Cells A8 and A9 be more dynamic. So if for example the value in H2 changed to say R12,06 then the intersection would be B and B. Therefore Cell A8 = B and Cell A9 = B
The formula is cell A8 and A9 doesn't cater for this as the range is fixed. I need a dynamic range for the index and match function based on the where the intersection of H2 happens to be in the table.
It mentioned something about getting comments which display dynamic data as if something metioned in the cells will appear in the comment and on changing the data in the cells, the data in the comments also changes with it..
Unfortunately, I could not save that file or remember the website as my Internet went bonkers...
So can someone please help me with the same....
I have a problem with 2 "IF formulas"
A B C
23:30 00:30 1:00 - =IF(B2>B2,A2-A2,B2+1-A2)
14:00 13:00 On Time -=IF(B3<A3,"On Time","Delayed")
My question is: - how to make the first line to show me Delayed. It is a problem with the time before and after midnight.
I am trying to send my field reps a spreadsheet that will allow them to pick the proper location for each building. The problem I am having is that there are ~45,000 buildings, each with anywhere from 1 - 92 locations. Here is how my spreadsheet is set up.
Sheet 1
Column A has the Buildings THIS IS NOT A DROP DOWN. THIS IS A STATIC CELL PRE FILLED OUT
Column B is where I want the drop down to be available for the rep to pick the location
Sheet 2
Column A has a list of the buildings
Column B has a list of the locations
I understand that normally I would need to create a named range for each building and its locations. However, there are more Buildings than columns in Excel. Is there a way I can do this using Index/Match, or Offset, or Indirect? I have a sample spreadsheet that can be found in my dropbox account using this link [URL]
I would like to repeat a formula and make its dynamic depending on the request.
The formular that I would like to repeat is:
=IF(ISERROR(INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3)),"",INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3))
I have a Filter set up across a few columns of data. Lets say one of the columns is called "Hours", and another is called "User". There is another cell called "Totals" outside of the Filter.
What I would like to have is a self-updating Totals cell that will Sum the total number of Hours for whatever the Filter is currently showing.
Examples:
If I set the Filter to show only UserA's data, the Totals cell will Sum the Hours for UserA.
If I set the Filter to show All Users with Hours greater than 2, the Totals cell will Sum all the Hours greater than 2.
If I set the Filter to show UserB and UserC and Hours less than 5...well you get the idea.
Can I write a function that loops through the data that meets the Filter's criteria? Do I need to create a macro to update the Totals cell each time the Filter is changed? Is there an easier way that I don't know about?
I have made a table with many dynamic formulas that I want to import into the Name Manager. It has the names in Column A and the "Refers to" formulas in Column B. Unfortunately, when highlighting the cells and using the "Create from Selection" feature of Excel 2010 it puts the Column B cell address in the "Refers to" field, not the actual formula. Is there another way to get these formulas into the "Refers to" field without typing them all out or coping and pasting them individually?
View 2 Replies View RelatedI have a Dynamic Named Range (Entries) that shows in my Name Manager...but is not being recognized in formulas.
The range is defined with a standard DNR formula, and selecting the code in Name Manager highlights the Dynamic Range.
[Code].....
But, when I use the NAME in a simple formula, I get an error. (#NAME?)
[Code] .....
I have a list of codes from which I'm trying to extract all unique entries.
For example, col A has 001, 001, 002, 003, 003, 003, 004, ...
I'm trying to create a report template with formulas that reference col A and return a single unique entry for each code so that the new column has only 001, 002, 003, 004.
Essentially, the codes reference customers. A customer can have multiple purchases -- but I'm trying to create a report in which I can utilize SumIf formulas to Sum the purchases for each customer and represent those purchases on a single line per customer code.
The catch is that the purchases change monthly (i.e., next month the purchases may be 001, 002, 002, 002, 004) so my report template needs to have the flexibility to adapt without me rewriting the SumIf formulas and return SumIf results for only customers 001, 002, 004. Whereas in the prior month, the report returned SumIf results for customers 001, 002, 003, 004.
i have a list of serial numbers in a column, say column a, for example, and i have corresponding data in columns to the right of this, say just column B for example- I also have a header on column B which counts the data in column b. (just a COUNTA, counting occurences of 'x' )
my issue is this: i need to limit the range of the COUNTA dynamically- by the number of serial numbers in column A. for example: if i have 10 serial numbers, i want my COUNTA range to be B1:B10 (excluding header) and... i need this to be a built-in formula, NOT a VBA macro. i need it to update automatically, as soon as another serial number is entered. i've tried using references to named ranges and all sorts of language tricks, and i cant seem to get it to work. (such as:
' =counta(b1:namedrange1)
i'm going to have to do the same thing with COUNTIF's, so if that is also easily explainable,
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
Want to type in a formula and copy it down through the column.
The formula should find the most recent final for the country listed in column A.
Country
Champions league final
Formula (Most recent final - country)
Spain
2012
?
[Code] ........
This is so hard to explain so see my example and my attachment. example: If "314A" is in column A and "4031" is in column B then return the value in column G.
View 3 Replies View RelatedI have a list that I have validated as a list with a blank on top to enable data override.
I have a formula that uses the content of this cell, c7 say, to perform so vlookup function and return a result. However, when the cell c7 is blank( meaning the blank cell in the list is selected), the result is #N/A.
I am trying to have that result be a blank.
The formula is as follows, assuming c7 is the data containing cell:
=IF(OR(LEFT($C7,1)="W",VLOOKUP($C7,Table2B_1,7)>9,ISBLANK(C7))," ",VLOOKUP($C7,Table2B_1,2))
I would like to sum results, all but #NA results. For example,
=Sum(I8:I10)
How do you manipulate the sum formula so it ignores the #NA 's? zip attached.
getting a macro to dynamically assign a drop down box to a list of numbers?
Specifically, I have a list of numbers in column A, and I would like to dynamically (because the size of the column differs every time) add drop down boxes in column B so that a user may select different values in column A, simply by changing the drop down box value to "Selected"
This would this make it easier for collect all the "Selected" values and perform further analyses upon them.
Here's my formula that gives me an answer of zero.
=IF(IF(L14="L",(LOOKUP(B14,data!Y1:Y14831,data!AO1:AO14831)),0),IF(L14="L+R",(LOOKUP(B14,data!Y1:Y14 831,data!AQ1:AQ14831)),0),0)
L14 is a dropdown box, selection is L or L+R
The L true result is 30 and L+R result is 60
It should be possible to combine these should it not?
I would do a screen shot but it's quite huge.
I want to make a lookup on a string of words from one of my worksheets and I also whant to make a hyper link so that when I click on the lookup command I should pop to the other worksheet were my database is.
View 2 Replies View RelatedMy table is the equation of time (EoT) (sundialist's jargon). It shows each day of the year if the sun is running fast or slow according to the clock. I need to make (on another page of that file) where I input the month and date. It will then till me the time it is fast or slow
View 5 Replies View RelatedI'm trying to calculate a figure in a report tab that reads off the data tab and looks for a specific column based on the header of that column. My explanation is admittedly poor but I've attached a sample file with an outline of what I'm trying to do which I hope makes things clearer.
Sample File.xlsx
