I would like to repeat a formula and make its dynamic depending on the request.
The formular that I would like to repeat is:
=IF(ISERROR(INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3)),"",INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3))
why this isn't working?
=SUM(OFFSET(A4,0,3,1,(LOOKUP(9.99999999999999E+307,4:4))))
Here is an example list:
Networks
Hardware
Networks
Software
Networks
Resources
Apps
Hardware
Apps
Software
Apps
Resources
Domain
Hardware
Domain
Software
Domain
Resources
Print
Hardware
Print
Print
All I'm trying to do in the second column is something that can say if there is a change in column A, then restart the order, or not..
I have a column of a few hundred numbers (price's). All the price's in the whole column need to be calculated with this formula: (price/119)*100. how to do this in excel 2003?
View 8 Replies View RelatedFormula request
I need to ( in currency)
Example
Col B = $2.06 . Col C = $3.42
I need to in Col D to calc the difference between B and C less 25%.
So in the above example D should = $2.90
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I am looking for a formula that will search a range on multiple worksheets for the FIRST blank cell and then make that cell the current active cell.
View 9 Replies View Relatedhow to make few dropdown lists depending on one before.
Example: I have table with next data: COLUMN A: (A1) Expense Type ( in all columns under A1 are types of expenses );
(A2) total trip cost;
(A3) Prize promo tour cost;
(A4 ) court renting cost;
(A5) Prize IPP cost
In columns B1, C1, D1, E1 are cities. Under each city is value for type of expense. I have uploaded worksheet for example.
Now, problem is next: I am trying to make drop down lists ( in new work sheet ) by using depending data from data table.
1.I made drop down list in first cell (let's say it is an A1 cell ) where I can chose city ( for example City of Zagreb ).
2.Then in next cell (B2) I would like to choose type of expense in drop down list ( for example Total trip cost ).
3.Finally, in C3 cell I would like to make drop down list that offers me just expense value for combination of chosen city ( Zagreb ) and chosen expense type ( Total trip cost ).
In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:
[Code] .....
All my variables are declared:
Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables
Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I
SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed
The error message I receive is the following: "Run-time error 13, Type mismatch"
I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.
if I have one cell that ive enlarged to half the sheet.... and it is effected with rollover hyperlink so that when I hover over other cells. it turns different colours..
is it possible to make that cell open up different files using the double click event depending on the colour it currently is?
i.e. if its blue, open file1. if its yellow, open file 2 etc
I think this is possible but cant find anything on it ........
View 9 Replies View RelatedI have this code which looks information in a table. The problem is that the table is getting every time bigger.
Here the code:
VB:
With Worksheets("Sheet10").Cells(9, 3).Resize(, LastColumnf - 2)
.Formula = "=IFERROR(CONCATENATE(VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,3,FALSE),""."",
VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,2,FALSE)),"""")"
.Value = .Value
End With
How can I write $A$10:LastNewRow... Another problem rises here, LastNewRow might end up being the oldLastNewRow, i think. But maybe since it is getting bigger, there is no problem, I don't know.
Instead of having a static reference like $C$550 I would like to have a dynamic one.
I'm trying to make two identical worksheets in a workbook. I would like the second sheet reflect all the changes made in the first one. I thought I would simply use = but it doesn't work correctly if I add or delete rows. If I add a row between row 1 and 2 in the first sheet the formula in row 2 in the second worksheet changes from =sheet1!A2 to =sheet1!A3. The result is the same if I use absolute references which suprised me. I want the formula in row 2 to stay =sheet1!A2 whatever happens on the first sheet.
I don't care about formatting, just data are important.
The reason I want the same data on two worksheets is that the second sheet will contain some more data that should not be visible to everyone. I want to protect the second worksheet and require a password to unhide it.
I have never used charts in excel unfortunately. I just finished watching a few tutorials but still a little confused. I have a WS with a list of items I want to make various charts of how do you make a chart that adjusts when new items are added? (thus dynamic data) Do you need a macro to do this or is it just standard by defining a range within that sheet?
View 7 Replies View RelatedI need to compare two tables in two different worksheets (A and B) and update the weekly changes (income and sales) from B to A. I have been using an Index(Match) formula which has been working perfect. I am however forced to update to a macro.
The worksheets are identical and each item is identified by a unique ID.
Any ideas in exchange for a 6-pack Budweiser?
I would like to update a chart after I have updated the underlying data just by clicking a button and displaying the updated date in the chart. Does anyone know how to do this? Currently I am having to manually click on the graphs line in the chart, which highlights the columns data, then manually extend this for the chart to update. And then I am manually typing in a date cell in the chart. There MUST be a cool way to do this.
View 6 Replies View RelatedI have attached a workbook.
I have a calculated value in H2. This value will correspond to values in the table provided. This value is dynamic and will change based on criteria that will be added.
The value H2 is a combination of to "letters" D1 and A2 or A4 and B1 i.e. trace back where the intersection of H2 occurs within the table
In Cells A8 and A9 I am trying to represent which combination of letters will result in an intersection of the value H2. In the example provided it is C and A.
What i would like to do is have Cells A8 and A9 be more dynamic. So if for example the value in H2 changed to say R12,06 then the intersection would be B and B. Therefore Cell A8 = B and Cell A9 = B
The formula is cell A8 and A9 doesn't cater for this as the range is fixed. I need a dynamic range for the index and match function based on the where the intersection of H2 happens to be in the table.
It mentioned something about getting comments which display dynamic data as if something metioned in the cells will appear in the comment and on changing the data in the cells, the data in the comments also changes with it..
Unfortunately, I could not save that file or remember the website as my Internet went bonkers...
So can someone please help me with the same....
How do I keep repeating
If Range("E22").Value Range("G3").Value Then
Rows("22:22").Select
Selection.Delete Shift:=xlUp
Until E22 does = G3
Then I need it to go to Row 23 and do the same.
My goal is to leave only rows (between rows 22 and 50) that have the same value in its column E that match cell G3.
I am trying to send my field reps a spreadsheet that will allow them to pick the proper location for each building. The problem I am having is that there are ~45,000 buildings, each with anywhere from 1 - 92 locations. Here is how my spreadsheet is set up.
Sheet 1
Column A has the Buildings THIS IS NOT A DROP DOWN. THIS IS A STATIC CELL PRE FILLED OUT
Column B is where I want the drop down to be available for the rep to pick the location
Sheet 2
Column A has a list of the buildings
Column B has a list of the locations
I understand that normally I would need to create a named range for each building and its locations. However, there are more Buildings than columns in Excel. Is there a way I can do this using Index/Match, or Offset, or Indirect? I have a sample spreadsheet that can be found in my dropbox account using this link [URL]
I have a 34-page workbook. On Every Row (starting on line 4), and on Every Page (except the first "Summary" page) is repeated, this same formula....over and over again in column "N":
=IF(A4<>"A",(IF(AND(A4<>"A",OR(J4="",J4="NT")),"OK","WARNING: EXECUTION NOT EXPECTED OF LOW PRIORITY TEST CASE!")),IF((LEN(J4)=B4),"OK","WARNING: STATUS DOES NOT EQUAL TC COUNT!"))
So, since this keeps repeating over and over again, is there some way (either by formula, macro, or whatever), that I can prevent the constant repeating on every line, to bring the file size back down? [Note: This formula alone actually added almost 5MB to the file size!]
Two things to know:
- The formula above is seen on row 4 (that's why you see "4" all over the place). On Row 5, it would be "5" instead, and so on...
- The formula above always starts on row 4, and goes down to the "last used" row, in column "N" (so there's other information in that last used row as well).
....hopefully this is a very easy thing to do?
(PS: Thanks PeterSS for the help creating the above formula in the past...hopefully it can now be made less repetitive to conserve ~5MB of file space!)
I'm trying to create a formula (if possible) that will repeat column headers down a row and repeat every nth time. I have text values in cells E6:AL6 and would like to use a formula that will make it so that E6 will show up B2, F6 will show up in B3, G6 will show up in B4, etc. And then when it gets to B35 (AL6), B36 will then revert back to E6, and the loop will continue - B37 will be F6, B38 will be G6, etc.
My thought is to create an offset/address of some sort that will read as OFFSET(E6,0,x+1) and if x>35, start back at 0. However, I don't think you can create such a formula using an offset?
I have a formula that is working, but I want to repeat it every seven columns. I know I can drag it and release it (or drag a few and release them in the appropriate column), but at this point I have so many columns that it's quite cumbersome to do that. Is it possible to create a macro that will automatically repeat the formula in every cell seven columns to the right (the same row for all)?
My formula is in cell K7 is:
=IF(AND(K24<=0%,K24>=-2%,OR(J32="T",J32="F")),1,"FALSE")
Now I want that formula to repeat (with the proper adjustments) for cell R7, i.e.:
=IF(AND(R24<=0%,R24>=-2%,OR(Q32="T",Q32="F")),1,"FALSE")
and then to automatically continue like that for cells Y7, AF7, AM7, and so on.
how to get it to fill down. Basically depending on the contents of column D, a formula (which also needs to fill with the rows) is copied from sheet 2 in to column K.
Code:
Sub Copy()
With Sheets("sheet1")
typ = .Cells(Rows, Count, "D").End(x1Up).Row
[Code]...
That's what I have. I am totally stuck. the formula needs to relate to column G and fill down too. this is the formula
HTML Code:
=IF($G2=2,$G2*90,IF(AND($G2<4,$G2>2),"$270.00",IF($G2>6,360+(($G2-6)*50),IF(AND($G2>=4,$G2
I'm looking for is to repeat this formula within the cell, so that it can pull the information of not only the first match, but all matches proceeding it. Right now it only pulls the first match it finds, but I would like it to add every time a row matches the criteria of the formula.
=(LOOKUP(2,1/(('Paste SFHS'!$A$2:$A$9=A2)*('Paste SFHS'!$B$2:$B$9="08-Wave/Stu. Goals")),'Paste SFHS'!$C$2:$C$9))
I have a column of text strings in a2.a??? this is my data. Each text string has a persons name somewhere in it with other text around it.
In column c2.c??? i have text names of people names im searching for. eg. bob,jane,harry
what would be a pratical use of the vlookup function to return the name in column b2.b??? if the name from C was located in the string in A this is a non case sensertive requirement.
I am in the process of developing a budget template for next year and here is what I want to accomplish through Macro to avoid the tedious mannual manipulation process (hope that's achievable). BTW, I am only an entry-level Macro user who has no background in coding.
I have attached an Excel sample but let me explain:
In each of the expenses tabs (1, 2, and so on (only 1, 2 given in the sample)), I want to be able to select a range of the data cells (A19:Q34 in "Expense 1" and A10:Q28 in "Expense 2") and run this Macro so that:
1. 10 blank rows be inserted between selected data rows
2. A sum created for each month from the four rows below) with different color
3. A Year to Date Actual and To Year End Forecast created based on the VLOOKUP of the "P&L" matching the account code by month
4. Finally grouping of the first 9 rows.
the above is what I have manually created for the first account code in the "expense 1" tab. I have 7-8 expenses groups and about 200 account codes. So mannually creating the above for each expense groups is not that terrible if this will make life easier for Macro.
I would think this is a very typical Macro issue but can't really come up with anything.
The other issue I ran into the VLOOKUP for the YTD Actual and TYE Forecast. It is to look up accont code in the "P&L" tab and match the #s. But the column numbers in the VLOOKUP do not change automatically when I copy across. Thus I have to change mannually, which is really a pain in the butt. I also know I can't copy down because that will change the account code that I want it to match. Because to be able to copy the VLOOKUP formula across the same account code, I need to use the $ to fix the account code. But to copy down I think I need that to be without the $ sign. Any solution on that?
how to make a cell a color depending on a number in a different cell? Example...if A2 is 92.6 how would I make D2 blue? But if A2 were 91.9 how would I make D2 red?
View 5 Replies View RelatedI wish to create a spreadsheet which has formulas which would enable me to see if a patient has had more than one referral created within the next 30-90 days [the actual number of days not important - the ability to modify the formula to reflect which time period required would be cool] and also to see if a patient has been referred for the same medical condition again. Thus in my mind at least two different formulas - has the patient been referred again within a time period of days and has the patient been referred again for the same medical condition.
Attached is an example referral spreadsheet I have created
how to make conditional formatting for border line (top & bottom) after repeat 5 data/text ....
it's possible with CF formula and do not vba?
see my excel file attached..