Making A List Of IDs And Cost Based On Date Range
Jul 14, 2014
I need to make an automated way of extracting a list of IDs and the associated cost by a date range, say 6/1/2015 to 12/31/2015, plus the starting letter of the ID. I need the data to then fill a form where it can be sub-totaled. There are several additional columns of data that are not relevant so I know I can create a pivot table and then filter the data, but then I need to copy and paste the filtered data into the form. Is there a way to do this without me copy and pasting everytime?
I added a test worksheet to show the data and form.
View 6 Replies
ADVERTISEMENT
Jun 10, 2014
Looking for a formula for total cost based on a list of hours for each employee and a table of rates for each employee.
Please see attached file : Formula.xlsx‎
View 1 Replies
View Related
Dec 9, 2013
Attached is a spreadsheet wherein I'm trying to extrapolate project costs across various months based on working days in a month subject to start and end dates of the project. Need an accurate formula to spread the cost.
Days & Cost Allocation Example.xlsx‎
View 2 Replies
View Related
Apr 21, 2006
I would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate.
Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
View 7 Replies
View Related
Jun 18, 2009
I am using something like this to copy data from one workbook to another
View 2 Replies
View Related
Dec 25, 2012
I have created a qualification tracking spreadsheet to track when qualifications are coming due. Each cell may have a different date based on when that employee initially got that qualification. I want the cell that the initial qualification date is typed in to turn "red" after 180days, "orange" after 120 days and "yellow" after 90 days. I have a formula that does close to what I need, but it changes the cell next to it in color.
That code is as follows: =AND(A1<>"",Today()>=A1+90,B1="")
I have attached the sheet, what I am trying to do. Basically columns B-E and rows 2-35 are the ones that need the formatting.
Streiffs_Weapons_Warfare_Qual Tracker.xls
View 5 Replies
View Related
Mar 15, 2007
In a financial environment we have a calculator which uses iteration to allow for a cost being added to loan amount where the cost is based on the total loan amount. Iteration is set to 100 iterations with max change .001
On one PC the first time the calculator is opened it gives a particular (incorrect) result. If the input cells are cleared and the data re-entered, it gives the correct result. This only happens on one particular PC. Is there some other setting , other than the iteration setting, that would cause this?
View 5 Replies
View Related
Mar 8, 2012
I'm using Excel 2010 on a Windows 7 machine.
I have one sheet with a large list of dates and total prices.
I have a second sheet with a list of dates and unit prices.
I want to divide the total price in my first list by the unit price on my second list.
I want to somehow point Excel to the date in the first list, and then lookup the corresponding date in the second list to use the correct unit price.
My thoughts thus far have been along using VLOOKUP with WEEKNUM and YEAR but I've been unsuccessful.
View 2 Replies
View Related
Apr 25, 2006
List Price $46.98 (e2)
Net Cost $19.53 (e3)
How do I enter a calculation that will show me my discount percentage from my supplier? (e4)
I then need to be able to drag the formula to the end of the sheet. Discount percentages will be different for each product, but the List Price and Net Costs are present, so the calculation needs to take these differences into consideration so that I get the correct discount percentage for each item.
View 9 Replies
View Related
Sep 26, 2007
set up a cost based markup spreadsheet?
I need to be able to mark up values from 0.01-9.99 by 20% of their value, and 10.00 and above by 10% of their value.
I only know how to mark up values by a single percentage.
View 9 Replies
View Related
Aug 22, 2013
i have attached the spreadsheet
basically I am trying to total this spreadsheet up to work out a sum for the month by customer number. some customers made a payment in jan 2012 and paid again in jan 2013, some paid twice in one month.
what needs to happen is
it needs to have customer number going down and the month/year going across the top with a summary paid for that month
i have attached the spreadsheet.
View 13 Replies
View Related
Jan 14, 2014
I need a sum of amount based on the Cost center & Category from the details table , can i have a formula to get them .
Please find the example amount in the attached excel sheet highlighted in RED Colour.
View 3 Replies
View Related
Jan 7, 2009
i. I currently have a spreadsheet which is used to forecast resource cost for a project. The forecasted cost is calculated on a few factors - rate, allocation, contract start and end date, and expected days worked per month. One of the mods actually helped me out with this a few weeks ago.
I now have been told that there is a possibility that certain resource costs may change in the new year and that will need to be reflected in the sheet whilst keeping the historic information.
For example - XXX has a rate of £200 p/d, allocation is 1, working 18.83 days p/m and is working from 01/01/09 to 01/06/09. The current formula will work out his cost per month until contract end. Now say his rate will be changed to £150 p/d from the 01/03 and all other info remains the same, I need the sheet to calculate his revised cost from 01/03 onwards and not change the calculation previous to that month.
Now Ive actually managed to figure that part out myself by adding in two columns (over-ride rate and over-ride date) using a nested IF statement. The only problem is that if the new rate starts mid month then it will still calcuate the original amount for the full month and the revised amount from the next month.
Edit - Also, could someone advise as to how do I remove my old attachments as I have almost used up my allocation.
View 10 Replies
View Related
Dec 15, 2007
I am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
View 9 Replies
View Related
Oct 9, 2007
In sheet1 I have the following
1. Names (Column A)
2. Date (Column B)
My current list if from A2:B300
I am trying to have a piece of code go through all the records in this list, if any of the dates are within the next 2 weeks (from now()) then copy this record (name, date) and put in sheet2. And loop through all 300 records or possibly additional records.
View 10 Replies
View Related
Jul 14, 2014
How would I create a simple user form to display a price based off the category selected.
User types in List Price, then selects 1 of 4 discount categories, it then displays that price.
An added bonus would be copying that price to another sheet, but not necessary..
View 2 Replies
View Related
Mar 5, 2014
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
View 1 Replies
View Related
Jul 1, 2008
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
View 2 Replies
View Related
Mar 28, 2014
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
View 13 Replies
View Related
Jun 20, 2013
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
View 12 Replies
View Related
Jan 14, 2009
I have a workbook of contracts that I have designed in excel. Each worksheet tab/title is the contract number, i.e. 3487. On each individual contract I have the contact name, address etc. Each cell/field is in the same position on every contract. In other words, every B1 is the Group name, every B2 is the first name, every C2 is the last name, etc. What I'm trying to do is to make a new page with all of the contact info on it so I can make labels etc. I hope this is clear.
View 5 Replies
View Related
Dec 12, 2007
i have to make a synonym list out of existing wordlist for my professor. As far that’s the most boring job I would like to ask you people, if it could be automatically done by a vba code. I don’t think that that’s technically possible but I hope though that I am wrong and that some one here can help me. I will try my best to describe the problem as good as I can. Please let me know if its not precise.
Here we go!
I have a wordlist containing four columns A,B,C and D. In column A we have got Source Words(sw), in column B word specifications1(ws1), in column C word specifications 2(ws2) and in column D we have many meanings and target words separated by comma (tw1,tw2,tw3,…) for (sw). The interesting columns for our problem are only A containing words (sw) and column D containing meanings and synonyms(tw). The wordlist is supposed be get larger through finding, enhancing and adding synonyms in the same list. The difficult thing would be to make a macro with two modes. In first mode which asks each time before it adds or enhance a cell and in second mode the macro should do all the work alone without asking the user. The existing wordlist looks like: ...
View 41 Replies
View Related
Apr 2, 2007
what im trying to do right now is get some scripting to work better
the following is what the macro recorder gave us
what i need it to do is read how many rows are in the range and put the totals row one after the end. now it seems to be set to 507 and one wksheet has almost 700. can someone help me decipher all this.
thanks
kev
Sub General_Reports()
'
Range("A:D,F:F,G:G,H:H").Select
Range("H1").Activate
ActiveWindow.SmallScroll ToRight:=4
Range("A:D,F:F,G:G,H:H,I:I").Select
Range("I1").Activate
Selection.Delete Shift:=xlToLeft
View 9 Replies
View Related
Dec 31, 2009
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
View 8 Replies
View Related
May 14, 2014
In it I have a list of different profiles (From autocad Civil 3D). With a column for the station value, and a column with the elevation. These profiles are arranged all below each other. In the example xls, I've limited it to 2 example profiles to make it a bit clear. The 1st few columns come from the export out of Civil 3D (with empty rows between them, but these are easy to delete). For each station of the profile, you have an elevation
What I need to do is calculate a 3D length for each profile. So manually you can do this with A=(B2+C2)^1/2, and then make a sum. Which is not really a problem if you have a list with 2 profiles. But sometimes we have a list with 100 profiles.
Optionally, it would also be handy that we then get a list in another sheet, with in 1 column the profile names, and next to it the 3D length.
My main question is: Is this possible with VBA? (I would assume it is..) Next, it would be handy if I could be directed in the right direction to produce these routines, because I don't have that many experience in vba.
View 3 Replies
View Related
Jan 2, 2014
I like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
View 8 Replies
View Related
Nov 10, 2008
1. Is it possible for this hyperlink box to only be displayed when ALL the questions have been answered? i.e. All drop down boxes have been used?
2. Is it possible for the result (along with their individual names and scores) to be saved on another sheet? This of course would be supplemental (i.e. When the next person finishes the test, their name would be next on the summary etc.)? I would then have a whole list of who had taken the test...when...and what their score was!
3. Finally, and I know I'm pushing my luck, but is it possible for this summary sheet of names and scores to be hidden?
View 9 Replies
View Related
Sep 18, 2013
I have a bunch of excel files in a folder, and I want to make an excel spreadsheet that makes a list of them all. This drive is a shared drive and their are different authors for files. I have already made the list, with the file name, date modified, date created, etc. However, I am having trouble importing the list of the authors for the files. Is there a way to automatically import a list of excel files in an excel, with an "authors" column? I can't do it manually, for their are hundreds of excel files.
View 1 Replies
View Related
Jul 22, 2009
I have one column with a list of 2000 rows like this
apple
banana
carrot
dog
elephant
fish
goat
hat
I want to do is put all those lines of text / rows into one cell with the word "or" between each phrase. In other words in one cell all the above should be made into "apple or banana or carrot or dog or elephant or fish or goat or hat" . There should be no breaks.
View 2 Replies
View Related
Sep 25, 2011
I have a list that looks sort of like this:
Last Name | First Name | Date | Service Day
Smith...........John....................Monday
Jones............Alex...................Thursday
etc..
This list goes on down for like 50 cells. Anyway, I'd like to make a new list based on Service Day so that I can organize the names under the service day so it should look something like this:
Monday | Tuesday | Wednesday | Thursday | etc..
Smith, John..............................Jones, Alex
etc...
I tried using the vlookup function but then it confused me when i also needed to match the names with their respective service days.
View 7 Replies
View Related
