Marking Then Copying To Another Sheet
Aug 15, 2012
Is there a way to go down a sheet and mark a certain row with say an X Then run a macro to copy all the cells in that row marked with the x to another sheet. There may be 45 X's down the sheet.
Example Below..
FirstLastAddressCityStZipCode
DaveJones55 Pine StElkhartPA3333221
xTomJones56 Pine StElkhartPA3333221
JoeJones57 Pine StElkhartPA3333221
xAmyJones58 Pine StElkhartPA3333223
So to either copy them to another sheet or even better a Word Document that is setup that has Cells to accept everything from First to Code.
View 3 Replies
ADVERTISEMENT
May 15, 2014
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
View 2 Replies
View Related
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Feb 10, 2007
Marking My Post As? How do i mark my post as solved?
View 5 Replies
View Related
Nov 18, 2008
I have a worksheet ('Matrix') that has a grid that is 40 rows x 40 columns. On another sheet ('Drivers') I have a two columned table where a user is enters two numbers between (you guessed it!) 1 and 40. What I'm trying to do is within the grid, have a "Y" appear on the crossing point as denoted by the table. I've tried a couple of experiments with MATCH, but I'm not getting very far.
I've attached an example document to make this a bit clearer and I've coloured the references on the 'Drivers' sheet to correspond to where they should appear on the 'Matrix' sheet. Sorry if that's a bit garbled. Let me know if you need any clarification.
View 4 Replies
View Related
Nov 19, 2008
Usually when I try to mark a row/column for future reference I code the following:
View 14 Replies
View Related
Apr 5, 2007
I am wondering what is a convenient way to invisibly mark off certain cells on a spreadsheet, so that VBA can later recognize that they are so marked, and thus treat them differently. I have a spreadsheet listing various farms that our hatchery purchases eggs from. I have a commandbutton on that sheet that opens up a userform, allowing the user to assign certain farms to participate in various breed tests. Ideally, when the user selects a farm for a breed test, the corresponding cell on the spreadsheet (containg that farm's name) will be marked in some invisible way. That way, when I run another macro, the code will be able to recognize that cell as marked, and treat it accordingly.
So, what is the favored way of marking a cell in a way that will remain invisible to the user? I know that there are plenty of properties that a cell has, many of which appear useless to me. Is it good protocol to adjust any of these as I like, or is there some method that is to be preferred?
View 2 Replies
View Related
Jul 8, 2014
So I am trying to mark certain rows as duplicates if their values in Columns J, AD and ABS(BD) match. J and AD contain Number letter Identification combinations and BD contains a value. I currently have a formula as shows that will mark all of these values:
[Formula]
=IF(AND(COUNTIFS(J:J,J15,BD:BD,ABS(BD15),AD:AD,AD15)>1, (SUMIFS(BD:BD,J:J,J15,AD:AD,AD15,BD:BD,ABS(BD15)))<>ABS(BD15)),"Duplicate","")
[Formula]
The issue with this formula is that I do not want it to mark rows that look like this:
J - AD - BD
AA1 BB2 20
AA1 BB2 -20
AA1 BB2 20
I have a lot of rows that will appear like this. Their sum in BD equals the absolute value of the value in BD. I thought this would get picked up using the SUMIFS portion of my formula but it is not. I cannot find the problem.
View 2 Replies
View Related
Oct 22, 2007
there are loads of posts sitting with requests for more info but just sit there because 2/3 replies have ben posted but nothing has been actualy done.
i dont look at these because i assume problem has been fixed so when i/others look we could actually still have a go at helping the original person better still once this is in place have a link to unresolved posts
View 4 Replies
View Related
Apr 30, 2009
I am looking at a register of documents that are constantly being revised. What I need to do is mark up which ones need to be reviewedDocument RevisionViewedapples1apples2yapples3apples4apples5pears1pears2ypears3pears4oranges1oranges2oranges3
If a revision is marked as Y then previous revisions don;t need to be looked at and can be marked with n/a anything older doesn't need to be reviewed except for the latest one. In the above table if apples revision 2 has been viewed so rev 1, 3, and 4 are no longer relevant and only rev 5 needs to be reviewed. Pears rev 2 has been reviewed so on rev 4 needs to be reviewed. No Orange documents have been reviewed so only rev 3 needs to be reviewed.
The above is just an example my table consists of 8000 entries.
View 12 Replies
View Related
Mar 21, 2013
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
View 1 Replies
View Related
Dec 3, 2008
I am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
View 4 Replies
View Related
Nov 21, 2009
I have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"
Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.
I am stuck however referring to the previous sheet to update the date value in "A1"
View 7 Replies
View Related
Mar 14, 2014
A little background, I am trying to match CC deposit batch transactions to daily sales transactions. I have two reports, one from our credit card processor/gateway (Report "B") and one from our software where the daily sales (Report "A") are recorded. I used the INDEX/MATCH formula to pull the information I needed from Report "A" into Report "B". It worked perfectly. My question is, is there anyway that I can show what information has been pulled from Report "A"? Possibly by highlighting what was pulled over? It is a longshot, but it would make my life so much easier if it was possible...
View 1 Replies
View Related
Jun 10, 2009
I receive an automation error, when using this code, the debugger is marking the line with n =...
View 14 Replies
View Related
Jan 9, 2014
I have a huge lists of names that I need to work with. The first is a list of all employees. The second is a list of those employees who have submitted their monthly report. In theory every record should be a match. I need to compare the lists and mark the people who are missing their monthly report in the main list of all employees.
Not sure how to set this up in Excel
Sheet 1: Column A - All employees names, Columns B-M: used to show whether a report has been submitted.
Sheet 2-13 (July, Aug., Sept., through June): Column A - employees who have submitted their report.
I need Sheet 1 to show either all of the missing records across all the months or it can show the ones that have been received. Either will work.
View 6 Replies
View Related
Jun 8, 2014
I am currently working on a script that will copy some data from one sheet to another, but I keep getting the following error message:
Run time error: Object required
at
Set uRng = .Range("F1", .Range("F" & .Rows.Count).End(xlUp))
What could be causing it?
View 3 Replies
View Related
Dec 12, 2013
I have a userform which clones the latest sheet and produces copy of it on the next sheet. The first sheet they will be cloning is the sheet called 'template', I however want this to be hidden since I do not want anybody to modify a sheet which basically serves purpose of a template. And once cloned, it is no longer needed.
On the click of the command button, the macro will create sheet1 taking the info from sheet named 'Template' in the same workbook . And now on the next click of the command button, Sheet 2 is created taking the info from sheet1 and Sheet 3 is created taking the info from Sheet 2 and so on. Here is what I currently have, so how can i modify it in order for my scnerio to work?
To select the last sheet in the workbook
Code:
Sheets(Sheets.Count).Select
To create new sheet
Code:
Sheets(Sheets.Count).Copy After:=Sheets(Sheets.Count)Sheets(Sheets.Count).Name = MyEvent & " " & MySCN & "(" & ThisWorkbook.Sheets.Count - 2 & ")"
View 3 Replies
View Related
Oct 8, 2009
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
View 9 Replies
View Related
Jul 14, 2009
The find value will always be the same...its just a placeholder that is randomly inserted. (currently i am using the value "Placeholder"). basically in column B i want to insert the iteration of the Place holder. the attached spreadsheet better illustrates what i am trying to do. starting the count at zero is kind of important, but not the end of the world if it is impossible.
View 3 Replies
View Related
Jul 30, 2013
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
View 3 Replies
View Related
Jul 7, 2014
I have a separate sheet that I will drop a csv file into. On another sheet, I would like to copy that data. I know how to copy a cell and drag it to collect all the cells for the first go around, and this would work great if only my csv file had the same amount of rows each time, which it doesn't.
Is there anyway to create a macro to copy a dynamic range of rows from another sheet?
View 3 Replies
View Related
Aug 2, 2007
what I need, but can't seem to string anything together for the final product. What I want to do is search one sheet, in column BQ, for the word Complete. If a cell has that word in it, I want to copy that row, paste it into another sheet, and than go back and delete that row, and continue the search until all rows have been searched. Is there a simple way to do this?
I was thinking of an auto filter, but I'm not sure it'd work how I want it based off of what I've read.
View 9 Replies
View Related
Jun 28, 2006
I have multiple worksheets and I am looking to take specific information from those worksheets and paste them into a new one, thereby compiling the information.
The "C" column is populated with certain cells that say "Not Acceptable". This varies from sheet to sheet, but all in the C column. I'm looking for a code that will run through all the sheets, find the cells that say "Not Acceptable", copy that row of information it is in, and paste it onto a specific sheet that we'll call "Summary"
View 4 Replies
View Related
Sep 21, 2007
I have attached my workbook. This has 3 sheets that contain data to be manipulated plus a data page.
The first sheet 'Referrals' is a permanent record, data remains in it for ever.
The second sheet 'database' needs to contain copied data from 'Referrals' when an entry is made in col P of 'Referrals'.
When an entry is made in col P of 'Referrals' the following is required to be copied into the next empty line in 'Database'
Col O 'Referrals' to Col A 'Database'
Cols B,C,D,E 'Referrals' to col B,C,D,E 'Database'
Cols G,H,I,J,K,L 'Referrals' to col L,M,N,O,P,Q 'Database'
Information in 'Database' will be required to be removed from time to time and copied to the sheet 'Leavers' which is another permanent record.
When an entry is made in Col AI of 'Database', the whole line (A:AI) should be cut and pasted into the next free line in 'Leavers' starting at col B. The data in 'Database' col AI also needs to be be copied to 'Leavers' col A.
If cutting the line from 'Database' leaves a gap, the entries below should be moved up.
View 14 Replies
View Related
Mar 31, 2009
My main sheet has a couple drop down menus controlled by vba which depending on what is selected, it assigns cells differently. For example, from the drop down menu, if 'A' is selected, cell G16 will be assigned as "abc", but if 'B' is selected from the drop down menu, cell G16 will be assigned as "xyz".
Just for additional information as it may help, "abc" and "xyz" are actually assigned around G90 and G91, but when 'A' or 'B' are selected, it cuts "abc" and "xyz" for G90 or G91 and pastes them to G16.
What I am trying to do is have cells in another worksheet show what is in the first screen. But if I assign cell G16 in Sheet2 as 'Sheet1'!G16, it will work if 'A' is selected from the drop down menu, but return #REF! when 'B' is selected from the drop down menu.
View 4 Replies
View Related
May 17, 2014
i use the following to copy columns from and external sheet to the current workbook
Dim wbCopy As Workbook
Dim wsCopy As Worksheet
Dim rngCopy As Range
[Code]....
this works fin but doesnt keep the column widths in the active workbook
I have tried adding Paste:=xlColumnWidths to the pste special but i get a "Paste Special Method class failed" error
I am trying to load the columns from the external sheet to the active workbook sheet but i want the column widths to stay as they are in the active workbook
View 1 Replies
View Related
Nov 26, 2008
Lets say I want to copy a cell in A1 Sheet one (Date) to cell A1 in Sheet 2. I go to cell A1 in Sheet 2 and hit = then click on sheet one AI and it populates. That's fine - but my question is when I try to drag it so it copies that formula to the cells underneith it shows 1/0/1900, when there is no information in the cell that is copied (A2,A3,A4, etc.). Is there any way I can have the copied formulas left blank?
View 2 Replies
View Related
Sep 29, 2011
I have a spreadsheet with a number of tabs in it lets call them
sheet1
sheet2
sheet3
sheet4
which all have records entered in them each record contains data in columns H TO Col AB - Starting at row 4 (row 3 contains the titles) from week to week the amount of records in sheets 1-4 will vary and in some cases, there will be no records at all.
i am trying to automate the process so that it copies the data from each of the sheets 1 - 4 and pastes it into sheet 5 before the process runs, all the rows from 4 downwards in sheet 5 get cleared.
It then goes to sheet 1, selects the range of data, copies and pastes the records into sheet 5 (row 4 column h) then looks up sheet 2, selects the range of data, goes into sheet 5, goes to the next empty row below the previously copied data and pastes the next selection, and so on.
View 1 Replies
View Related
Jan 12, 2012
I need to copy the whole of the sheet "AR Report" From the open workbook called "Current AR Report HSUK.XLS" Then to copy this into a new tab called AR Report (it needs to create this tab!) on the workbook "45dayreporttest"
Code:
Sub COPYCELL()
Dim wbk As Workbook
strFirstFile = "S:ACCOUNTSAR ReportCurrent AR Report HSUK.XLS"
stropenfile = Workbooks("45dayreporttest").Sheets("sheet1")
[Code] ........
View 9 Replies
View Related
