VBA Macro To Create Multiple Workbooks From One Master Workbook By Cost Centre
Jun 27, 2013
VBA Macro to work through a worksheet that consist of static data (tab 4) cost centres and to populate a new work book per cost centre consisting of three tabs for every cost centre found in the static data.
The master Workbook has the following tabs:
Tab 1 is called travel and consist of column a which is the cost centre number (plus 14 other columns)
Tab 2 is called Mobile and consist of column a which is the cost centre number (plus 14 other columns)
Tab 3 is called Expenses. and consist of column a which is the cost centre number (plus 14 other columns)
Tab 4 Static Date column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns).
If no information found on a specific cost centre, the tab will include the headers and return the words "No transactions for this period"
Whilst splitting data into Tabs the workbooks should check against the Static Data table and include cost center description in Column B of each tab in the new workbook.
If master workbook consist of the following....
Tab 1 is called travel and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,557,
Tab 2 is called Mobile column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns) cost centres, 555, 78689,
Tab 3 is called Expenses. column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,
tab 4 Static Date - column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns). cost centres, 555, 557,78689
It should output 3 workbooks by cost centre number.
One for 555, which consists of 3 tabs, travel, mobile and expenses.
A second for 557 which has 3 tabs travel, mobile and expenses, but only with data in the travel tab.
A third for 78689 which has 3 tabs travel, mobile and expenses, but only with data for mobile data.
The workbooks will be replicates of the contents within the tabs where column a wil be the cost centre plus 14 additional columns.
I need to consolidate a lot of information from multiple workbooks all the workbooks are located in a folder, i am not bothered about running each one separately or a group at a time, each work book has ten sheets with each sheet in the workbook being different, it needs to add to the next blank row on each sheet.
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from. 2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook 3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
how to consolidate multiple workbooks into the master workbook? I need to consolidate 12 workbooks into the master workbook every month. The subsidiaries will report me their figures monthly. Hereby attached one of the subsi, "B Co" reporting package, and the master copy "XYZ Holding Co" how it look like. Hence, may I know how to write a macro so that it will auto update monthly when the subsidiaries return me their reporting package, so that I can auto update in my master copy for tab BS and tab PL.
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
At our small firm, each staff member keeps a small excel spread sheet on the network that contains their "work in progress." This spreadsheet is roughly six columns wide and roughly twenty lines long.
What I am attempting to do is have one "master" spreadsheet with a tab for each staff member that links their "work in progress" so that partners and managers can easily see how much work each of the fifteen or so staff members have.
I can create fifteen different tabs and fifteen different files on the network and link =[Staff1.xlsx]Sheet1!$A$1:$G$25 =[Staff2.xlsx]Sheet1!$A$1:$G$25 =[Staff3.xlsx]Sheet1!$A$1:$G$25 and so on.
If I make a change to the layout of the work in progress sheet, I have to delete and copy the file fifteen times, then go back through and re-link fifteen tabs to fifteen workbooks in order to keep it uniform.
I want create a macro which will extract 6 values (see below) from a workbook tab called summary to an master workbook for reporting purposes. Each workbook has a unique file name e,g ACI1150.
Values on sheet SUMMARY: A1 A2 A3 G21 G24 G26
I tried to adapt the below to get one item copied/extracted. However it would no work.
I am new to using macros
Sub GetG26s() Dim MyDir As String, FN As String, SN As String, NR As Long Application.ScreenUpdating = False
I'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
Is it possible to VLookUp Data between multiple workbooks (12 different workbooks to be exact) in one master sheet?
I would like the master sheet to find the empty data for the item number. Basically, how can I automatically populate the empty data for each item number in the master sheet. Every item will be different. The 12 workbooks are invoices throughout the year (Jan, Feb, Mar, Apr, etc) and these workbooks have the data needed to fill the master sheet. How is this possible? Or is it not?
Master sheet.xlsx -Contains item number -Purchase Date -Sell Date -Purchase Price -Sell Price -Profit Price
The 12 workbooks are the 12 months out of the year, which are invoices.
- Contain the data needed in the master sheet such as sell date, sold price, and profit.
The reason I would like to keep the 12 invoices as workbooks instead of worksheets in 1 big file, is due to the high capacity of item numbers each monthly invoice would have. For example (approximately 500 items in each workbook)
I have for hours and weeks, actually months, But I haven't found any sources on the internet, although I have seen the VLook Up how to's on youtube between 2 workbooks, but not the 12 I would like.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:
Sub LoopThroughDirectory() Dim MyFile As String Dim erow MyFile = Dir("C:ToolFolderWorkObjectives")
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
I attached a workbook and it shows data in row 2 - 960. and in cells BA1574 -BM1604 are the summary by using 'sum if' function. As you can see, row 160 countercheck the results and it shows differences.
So my questions are
1) any formula that i can use to ensure all cost centres are taken up in Col AZ1574 - AZ1604? I am sure that i have missed something out.
2) My goal is to summarise the total of each cost centre. Is there other options to reach this goal apart from using 'sum if' function? I would like to learn something new.
On a weekly basis, I receive a single worksheet in a workbook that contains ~30,000 rows of product sales.
Row one contains column headings that is unique to all other rows. Column A contains the store number that sold the product. There are ~50 unique store numbers.
I am trying to create a macro that will break the report up into seperate workbooks.
For example, assume in column A there are 30 rows of data for 3 different store numbers (say store 112, 386, & 798, each with 10 rows of data). I want to create 3 new workbooks and include the same column heading for each. For example, name new workbooks as follows: "Store 112", "Store 386", "Store 798".
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files. My question is how do I write the code so the source files populate the master in a specific order. For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit Sub ConsolidateSheetsFromWorkbooks() 'Author: Jennifer Starr 'Date: 7/12/2013 'Summary: Open all files in a folder and merge data (stacked) on all
I am trying to create a master file, with a macro built in, that will allow multiple users to use it at once. The macro is to open a dilouge(sp sorry) box showing the contents of a specific folder, allow the user to selct one of the sheets, then copy and paste the set details from the hidden tab on this sheet (All sheets will be the same barring title), append the details to the master list in the first empty row.
I've got this far thus Sub Macro1() ' ' Macro1 Macro ' ' ' Modify this folder path to point to the files you want to use. FolderPath = "My Folder name here"
' Set the current directory to the the folder path. ChDrive FolderPath
[Code] .....
So I can copy the row, but I can't get the first part to open .
This is a relatively long list - 1000's. What I'd like to do is create a macro that sorts by brand, and at every change in Brand, copy the user details (Username, firstname, lastname, email) to another workbook with those labels at the top of the table. Upon completion, it saves the workbook with the name of the appropriate brand.
E.g. I'd have 3 workbooks: - BrandA.xlsx - with the 2 user listed - BrandB.xlsx - with the 1 user listed - BrandC.xlsx - with the 1 user listed
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB: Sub Create_Subfiles()
Dim FDMName As String Dim FBName As String Dim DIYName As String Dim WMName As String
Is it a good idea to merge xls workbooks in to one master workbook?
I have read online that some say it is ok and nothing will happen and others say it isn't a good idea because macros and formulas will not work right once merge in to one workbook.
So I have many workbooks with 2 - 4 worksheets in them. All have formulas as well as macro's and everything is working fine just as it is. But I would like to have 1 Master workbook with all workbook/worksheets combined in to 1, so that I can stop opening so many workbooks.
I wish to be able to get data from several workbooks (.xls), and gather all the data in one master workbook.
As I said, I've got a number of workbooks with data I wish to copy and merge into one master worksheet. Each workbook contains a sheet called "MILESTONES" (project) in which I want to pick up data. The data ranges from A5:J88, but I think this can be expanded by the users (more rows). There is no guarantee that the users will enter data in all the columns. Columns A and B occur frequently blank, so the users usually starts entering in information in column C (heading = description).
The Master workbook contains of exactly the same headings, except that the columns has been expanded by 1. Column A1 has the heading "Workpack" which is the name of the workbook the information has been gathered from (description is in column D1). This name can be found in a sheet called "REPORT" in all of the workbooks, and I want this to be copied over, row by row so it matches the data. I don't know if it can cause any trouble, but the names are merged through C to J in row 12 in all of the workbooks.
The workbooks (or workpacks) and the master workbook (summary) are placed in the same folder. Let's say C:Project. The workbooks also changes names frequently (each month). Lastly, if there is a way to automatically update the master workbook every time it is opened.
I have 600+ variations of the same workbook. Contained within each workbook is a worksheet, from which I need to copy and paste a range of cells into one "master" workbook. For example, in workbook 1 I need to copy rows 2:5 and paste that into the master workbook in cells 2:5. Then I need to open workbook 2, copy rows 2:5 and paste them into the master workbook starting at row 6. I have fumbled my way through everything except the pasting part into the Master workbook.
I have a workbook that links out to numerous other workbooks for current data. After one of the supporting workbooks gets up dated, I return to the master workbook.
Here, I need to see the updated results. The only way that I can find a way of updating the master is to close and save it and then re-open.
Is there a way of updating the master workbook using a macro?
I have got a file with a lot of different workbooks
What i want to do, is open each one of them, copy a range of cells, for example E4:E15, then open the "master" workbook, look in row 4 which cell is empty and then paste the data there
i know how to copy-paste from one workbook to another, i am just not sure how to do it for more than one workbook.
I have several hundred workbooks which are linked to a master workbook from where the workbooks draw their information. Now I would like to break all the links in all of the several hundred workbooks to this master workbook and retain the information. Is this possible without having to open each workbook individually and break the links via the 'edit links' option?
I'd like to import column A,E, H, and I in different 11 workbooks in MYdocument folder to one Master workbook.
I'd like to import 'Name' and ' ID' in cell E3 and C3 in each different 11 workbooks to cell A1 and cell B1 in Master workbook.
Starting row for Column A,E,H and I are 'row 6' because row1 thru 5 are title, name, and comments.
In the Sheet 1 in Master workbook will be the Main sheet for command buttons, so I want to import after Sheet1 in Master workbook.
I want to import each worksheet , not stacked type. I got 11 workbooks in my document right now, but numbers are always changing. I also import in row 2 in Master workbook because I need to add title or button on row 1 in Master workbook.
How can I import only selected columns from row 6 into row 2 in master workbook?
