I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
Attached worksheet : Test booklet.xlsx
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
CPT Sample Book.xlsx
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies View RelatedIf I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,
MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP
(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
View 9 Replies View Relatedi would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 8 Replies View RelatedI have a spreadsheet with two different rating scales (People & Business) that have a value of 1-5 per person. From this I created another column 'Sorter' that gives a person a single value of 1-25 (5*5 possibilities from the two rating scales.) I am trying to place people into a table based off of the column 'Sorter' as shown in columns U-Y. The real table cleaned up is in the table tab.
View 5 Replies View Relatedthe formular that i have in the attached file is returing all the customer numbers
Is it possible to return only one value of each
the data is in the "data" sheet and the formulars are in sheet1
I'm trying to extract the selected suppliers orders from a 1000+ rows list ; like appearing with the example of supplier "D" ; and the new one should be dynamic , it means if any data added to the source orders list and if the supplier was one of the selected the new table automatically update ; or can be refreshed
View 9 Replies View RelatedI have attached sample sheet.
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
I have a bill of materials with a description column. I want to search that column for various words (ie. wheel, screw, spacer, shelf, etc) and return a value into another new column depending on that value (wheel inputs wheel, screw inputs hardware, spacer inputs hardware, shelf inputs shelf).
How Excel shows you how to search will only return one value because I can't use an else statement:
Sheet 2 is the problem.
I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.
Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.
I have included a sample.
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
I have a workbook with multiple sheets in it. One sheet is an Overview sheet, and the others represent the months (JAN, FEB, MAR, etc). On the Overview sheet, I have a few columns of data set up that I need to retrieve from the various sheets within the workbook. The thing is, this data can occur more than once on any particular sheet and it's very likely to occur multiple times throughout the workbook. For example, compressor #1 was blown down on January 1, January 15, February 5, February 9, February 12, April 22, and so on. Compressors 2-5 were also blown down multiple times throughout the year, as well as various other equipment that I have listed out throughout the numerous monthly tabs. On the Overview sheet, I have the columns Equipment, Date, Temp, Begin PSIG and MCF Loss. I'm needing to get the information from those tabs into these columns.
I first tried a simple VLOOKUP. After all, it's worked for so many situations similar to this, why wouldn't it work here? I quickly found that it won't work here because I need to return multiple results, not just the first one it comes across.
When I copy the formula down it seems to return the same results in every cell, not the next result, and the next, and the next, and so on.
I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:
Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid
When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.
I have an assigned value of 10 to each checkbox that is checked. If the checkbox is selected I want to automatically sum the totals in a cell on my active sheet. Checkboxes are activeX placed directly on a worksheet. I currently have a work around but considering the number of checkboxes I have, coding is going to be a nightmare as I would have to code each one separately. Right now I am summing each box on another sheet and linking the summed total back to active sheet.
[Code] ....
I would like to do all check boxes with one code and sum the total in the active sheet in cell "I7". The set of checkboxes is 1 to 26.
I am looking to produce a formula that shows if a number is "found" or "not
found".
I have list of over 1000 numbers in one column (1 number per row) . I am
trying to identify if those values are present in a range of numbers from
another worksheet(also in a single column). My challenge is that the range of
numbers that I am looking in has multiple values, separated by commas in a
single cell. Looks like it was from an Access data dump.
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View Relatedformula that will return the number of "x"s or "o"s within the same cell.
The cell has values that are formatted in multiple ways for example: PXX--XXP, --XO, OXX--.
I want the formula to return 4 if the cells has PXX--XXP or 3 if the cells has --OXX etc.
Basically I have a workbook that contains two worksheets, sheet1 contains flight numbers in column A and column E contains the Charge code that belongs to the flight number. The problem I have is that in some cases the flight number can appear more than once in the column and the corresponding charge code is different. Is there a way of using a look up to find the flight number and bring back the corresponding Charge code in sheet2?
Please note I have attached a summorised version of the workbook, the actual Travel# in sheet2 is in column R and the Charge code in sheet2 is in column AD.
I have list of 2043 rows and i have like 29 values i need to look up and return me several values that associated with that particular number but I want it to list them horizontally or even vertically but whenever i get the right code in one cell and i drag that green box it formats it in a weird way that gives me an error.
Here is the sheet I would like an VBA or macro.... my VBA code is already on here but somehow i get an error.
Book3.xlsx
So what i did was the first code followed this example still get errors [URL] .....
So match pcode columnsA to find and return the columnB result somewhere else on the sheet list them out horizontally preferred or vertically.
I'm looking to create a UDF called ListItems which will look through a range and create a one column contiguous list of non-blank values.
e.g. below is Range("A1:C3") --> ignore the Column Headers, they're just included for visual reference.
Column A
Column B
Column C
John
Peter
Mary
Andy
Dave
Karen
If the user used =ListItems(A1:C3) in cell D1, the result would be:
Column D
John
Peter
Mary
Andy
Dave
Karen
Couple of things to consider:
1. The user would most likely have to confirm this function with Ctrl+Shift+Enter --> that is fine
2. A UDF might not be the most efficient/suitable solution to this "problem", but I'm currently learning about UDFs, so am more interesting in how they work, than determining the most elegant/correct way to resolve this issue.
3. The order of the resultant values which I have used above (i.e. reading the range passed to the UDF from left to right one row at a time), is not critical, if it is easier to read top to bottom one column at a time, that would be absolutely fine too.
I'm trying to lookup one value in a column, and if I find that value in multiple cells, I want to return what value is next to the finding value.
Attached is an example with 2 tabs of info.
Is there a way where i can vlookup a column and return all matches if there are multiple values?
View 5 Replies View RelatedI have a list of countries in column A, there are duplicates in this list. In column B are numbers corresponding to the country.
A B
IRELAND 1221
GERMANY 2341
USA 3443
IRELAND 2231
Ireland could be in the list and have up to 20 different values beside it in column B
On a separate sheet i have a drop down list of all the countries. I am looking for a vlookup or something similar to return a list of all the numbers beside IRELAND when Ireland is selected in the drop down list.
I had been trying a vlookup but this looks at the list and stops at the first "IRELAND" it finds and just returns the value beside the first "IRELAND"
I am trying to write a formula that is based on a vlookup that will return multiple values. Attached is a spreadsheet that is an example for what I am trying to do. On the download tab it is an example of a general ledger. On the total tab I want to enter a GL# and have it list all the entries for that GL number. I know I can try an array, but I have not been able to figure that out.
View 6 Replies View RelatedI am remodeling my home and have put together a budget template. I have uploaded the file to make things easy to understand. Basically I want to return the values from column F and G on sheet "ledger" to the corresponding account name to column H in sheet "budget". For example, rows 14, 21, and 22 in the "budget" sheet currently correspond to the "fuel" account. I would like those values in column G (or F) to be added and calculated in cell H58 in the "budget" sheet.
View 5 Replies View RelatedI managed to found an array formula that return multiple values with a condition. Below the formula:
[Code]....
I am attaching a simple file. In cell O4 I paste the formula, and I drag it as much as I need. But my issue comes when the formula begins the calculations. I need to calculate 50 columns with over 9,000 rows each column (over 45,000 arrays). Imagine the processing load to my computer and the consuming of time.
Attached File : Return-multiple-values-horizontally.xlsx