I am remodeling my home and have put together a budget template. I have uploaded the file to make things easy to understand. Basically I want to return the values from column F and G on sheet "ledger" to the corresponding account name to column H in sheet "budget". For example, rows 14, 21, and 22 in the "budget" sheet currently correspond to the "fuel" account. I would like those values in column G (or F) to be added and calculated in cell H58 in the "budget" sheet.
In the attached sheet, I want to look up values from table (A1:G5) and then for each occurrence of a particular number, return the value in the same row in column H, and sum when there are multiple values (see green shaded area for desired output. For example, the number 8 occurs in E3, E4, and G5. I want to return the sum of the corresponding values in column H (1,5, and 2). I've spent hours trying to work this one out, I'm sure this is probably an array formula, but I can't manage to make it work.
I have this formula but it only gets the 1st Reuse code, I want it to get ALL reuse codes for that item.
{=INDEX('Reuse list '!$P$2:$P$24489,SMALL(IF('Reuse list '!$E$2:$E$24489='Status Sheet'!A11,ROW('Reuse list '!$E$2:$E$24489)-ROW('Reuse list '!$E$2)+1),1))}
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10, MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP (INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
I have a spreadsheet of information (product codes and values) and want to use VBA to find the top ten list of products by value. The list of products is variable in length so I can pass the data to a two-dimensioned array.
How do I ask VBA to return the top ten products by value - there can be duplicate values so I just want ten (if there are 4 #9s, I just want two of them, any two)?
I seem to be incapable of creating an array to return all of the values in each of the cells in the first row so that I can populate a combo box. I managed to do it without a problem for copying the sheet names within a workbook but not for this and I want to bang my head against the wall!
Basically, I have the first row of my spreadsheet for which I don't know how many columns contain data so my range is variable.
I then need to take the value of each cell and add it to my combo box (Later I would also like to use this routine to create and append sheets in other workbooks).
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
I'm having a difficult time returning COUNTIF values for a positive match between 2 columns THAT meet a certain condition. Basically I want to iterate through column A sheet 1 (ONLY for values where column B is paid) and return a count for every instance there is a match of value A sheet 1 in column A sheet 2. In other words, I'm looking to find the number of ids marked as paid from Column A sheet 1 that exist in Column A sheet 2. I don't wish to return the actual ids, just the total count.
I've tried the following but I know there's an error in iterating through Column A the way I have it:
I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:
{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.
My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?
Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.
Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.
Link to an example document to clarify this. [URL] .......
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
I have a list of ID Numbers and Dates. Let's call this "List 1".
I also have a second list "List 2" which also contains a list of ID Numbers and Dates as well as a third column for Rating.
I am trying to extract the Rating for each ID Number from List 2 and display in List 1. The problem is that the Rating can change with time, so List 2 contains several different Date and Rating values for the same ID Number.
What I need to do is lookup the ID Number from List 1 and return from List 2, for that ID Number, the Rating at the closest date prior to the date for that ID Number in List 1. Example below:
I have a bill of materials with a description column. I want to search that column for various words (ie. wheel, screw, spacer, shelf, etc) and return a value into another new column depending on that value (wheel inputs wheel, screw inputs hardware, spacer inputs hardware, shelf inputs shelf).
How Excel shows you how to search will only return one value because I can't use an else statement:
I have a workbook with multiple sheets in it. One sheet is an Overview sheet, and the others represent the months (JAN, FEB, MAR, etc). On the Overview sheet, I have a few columns of data set up that I need to retrieve from the various sheets within the workbook. The thing is, this data can occur more than once on any particular sheet and it's very likely to occur multiple times throughout the workbook. For example, compressor #1 was blown down on January 1, January 15, February 5, February 9, February 12, April 22, and so on. Compressors 2-5 were also blown down multiple times throughout the year, as well as various other equipment that I have listed out throughout the numerous monthly tabs. On the Overview sheet, I have the columns Equipment, Date, Temp, Begin PSIG and MCF Loss. I'm needing to get the information from those tabs into these columns.
I first tried a simple VLOOKUP. After all, it's worked for so many situations similar to this, why wouldn't it work here? I quickly found that it won't work here because I need to return multiple results, not just the first one it comes across.
When I copy the formula down it seems to return the same results in every cell, not the next result, and the next, and the next, and so on.
I know there have been many posts about multiple conditions in arrays, but I didn't find one that applied to my situation, so I'm hoping can help me out of jam. I'm using Excel 2000 on XP.
I have a database of sales information. Customer name is listed in column C, and columns F through Q contain the sales for the months of July - June (fiscal calendar year), with the headers for the months in row 4. There can be many rows of sales for the same customer, hence the need to sum them.
Example
C F G H CUSTOMER JULY AUGUST SEPTEMBER customer1 2 3 4 customer1 2 3 4 customer2 2 3 4 customer2 2 3 4
The problem is that this information will need to be updated every month to reflect sales year-to-date, meaning that the conditions for summing the data will change depending on how far into the year we are. So for instance, in August I will need to sum all the records for customer1 in the July column (column F) and the August column (column G), but next month it will have to sum the records for customer1 from July, August, and September (col H).
The result of this information would be displayed on a different worksheet. My thought was to assign a range of 12 cells (Sheet2!A1:A12) and to populate those cells with any of the months that need to be summed thus far. So for example, through September, A1 = "July", A2 = "August", and A3 = "September". Then the formula would use those values to evaulate the conditions. So in plain English the formula would:
sum the values in columns F : Q where the monthly header = the values in the range Sheet2!A1:A12 for all records where CUSTOMER = CustomerName
Basically I have a workbook that contains two worksheets, sheet1 contains flight numbers in column A and column E contains the Charge code that belongs to the flight number. The problem I have is that in some cases the flight number can appear more than once in the column and the corresponding charge code is different. Is there a way of using a look up to find the flight number and bring back the corresponding Charge code in sheet2?
Please note I have attached a summorised version of the workbook, the actual Travel# in sheet2 is in column R and the Charge code in sheet2 is in column AD.
I have list of 2043 rows and i have like 29 values i need to look up and return me several values that associated with that particular number but I want it to list them horizontally or even vertically but whenever i get the right code in one cell and i drag that green box it formats it in a weird way that gives me an error.
Here is the sheet I would like an VBA or macro.... my VBA code is already on here but somehow i get an error.
Book3.xlsx
So what i did was the first code followed this example still get errors [URL] .....
So match pcode columnsA to find and return the columnB result somewhere else on the sheet list them out horizontally preferred or vertically.
I'm looking to create a UDF called ListItems which will look through a range and create a one column contiguous list of non-blank values.
e.g. below is Range("A1:C3") --> ignore the Column Headers, they're just included for visual reference.
Column A Column B Column C
John Peter Mary Andy Dave Karen
If the user used =ListItems(A1:C3) in cell D1, the result would be:
Column D
John Peter Mary Andy Dave Karen
Couple of things to consider:
1. The user would most likely have to confirm this function with Ctrl+Shift+Enter --> that is fine
2. A UDF might not be the most efficient/suitable solution to this "problem", but I'm currently learning about UDFs, so am more interesting in how they work, than determining the most elegant/correct way to resolve this issue.
3. The order of the resultant values which I have used above (i.e. reading the range passed to the UDF from left to right one row at a time), is not critical, if it is easier to read top to bottom one column at a time, that would be absolutely fine too.
I need to modify the underneath Count Array Formula to count unique values based on multiple conditions. I can get the formulas to work with NUMERIC values in Column A in the N1 & N2 tabs. However, I cannot get the formula to work when column A contains TEXT values in the TX1 & TX2 tabs.
I've attached the XL file for your review of the project.
I need to figure out how to match three values on the "source info.xls" file attached to the "PFG FILE.xls" that is also attached. In column A in the "Source info.xls" file the formula will need to match the yellow column, then the green column, then the red column. keep in mind that the attached files are just a small subset of data. The "PFG File.XLS" is actually 150K rows long.
I have a list of countries in column A, there are duplicates in this list. In column B are numbers corresponding to the country.
A B IRELAND 1221 GERMANY 2341 USA 3443 IRELAND 2231
Ireland could be in the list and have up to 20 different values beside it in column B
On a separate sheet i have a drop down list of all the countries. I am looking for a vlookup or something similar to return a list of all the numbers beside IRELAND when Ireland is selected in the drop down list.
I had been trying a vlookup but this looks at the list and stops at the first "IRELAND" it finds and just returns the value beside the first "IRELAND"
I am trying to write a formula that is based on a vlookup that will return multiple values. Attached is a spreadsheet that is an example for what I am trying to do. On the download tab it is an example of a general ledger. On the total tab I want to enter a GL# and have it list all the entries for that GL number. I know I can try an array, but I have not been able to figure that out.
I managed to found an array formula that return multiple values with a condition. Below the formula:
[Code]....
I am attaching a simple file. In cell O4 I paste the formula, and I drag it as much as I need. But my issue comes when the formula begins the calculations. I need to calculate 50 columns with over 9,000 rows each column (over 45,000 arrays). Imagine the processing load to my computer and the consuming of time.
