Matching Header To Copy Data And Add New If Not Matched
Jan 31, 2014
I am trying to match headers of different files and copy data.If the one of the header is not matched then a new column with the non matching header should be created and the column has to be copied
Ex: file1.xlsx has AA BB CC as header
file2.xlsx has AA BB DD EE as header
file3.xlsx should contain AA BB CC DD EE i.e data from file1.xlsx and file2.xlsx
I have more than 300 files how can I copy all the files to one excel file by matching headers ?
View 1 Replies
ADVERTISEMENT
Aug 4, 2014
I need to compare column A of Original.test worksheet to column A of Supplier.test worksheet. If there is a match then copy entire row of the corresponding match from Original.test to Matched worksheet. If no match then copy that row into OnlyInOriginal worksheet.
I have included the workbook and what the output should be. Hope it makes sense. ozgrid.xlsx
View 5 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
May 19, 2014
I have 2 columns worth of data (ie: B and C). I want to see if there are matches AND if there are matches, I want another column's data to be shown (ie: A).
Columns B and C are peoples names and column A are employee numbers. Sat around bouncing ideas off coworkers and we could not figure anything out.
View 11 Replies
View Related
Jun 12, 2009
i need a macro that will allow an entire row from one sheet be copied into a new sheet.
so basically here is what needs to be done:
1. from my active sheet, look in Column 'D', select all rows in in column D if it has the word "Confirmed" in it
2. create a new sheet and paste all those selected rows to this sheet
3. delete this transfered data from sheet 1
4. in the new sheet, i need to add in titles as follows in columns A - O:
Ticket
OrgCode
Event
Event Status
Project Type
Project Status
Start Date
End Date,.....................
View 9 Replies
View Related
Feb 20, 2014
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
View 1 Replies
View Related
Dec 6, 2013
Attaching the excel (QOS- ARP- Applications.xlsx) - Formula I am trying in D27, "X" value is there in the row and the corresponding application (Header ) should be the return in D27.
View 1 Replies
View Related
May 16, 2013
I'd like a formula that'll return the column header by matching a lookup value with a table in the second sheet.
eg: sheet 1
Name
Cell
Region
John
111-2222
[Code] .......
The formula should match the name in A2, John, with value from the table in sheet 2 and return the correct region, this case North.
View 1 Replies
View Related
Apr 11, 2014
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
View 3 Replies
View Related
Oct 18, 2013
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
View 14 Replies
View Related
Jul 10, 2006
I'm trying to use a vlookup or some formulae in sheet 3 that looks at AGDP and matchs column A with a number in statement file worksheet column b. If they match not all of them will then the row is cut and paste into Sheet 3.
View 9 Replies
View Related
Nov 12, 2006
I have 2 worksheets in excel.
1. No. Description Code Req Unit Amount
1 Description 591032 1 pc ?
2 Despription 614804 25 pcs ?
etc.
2. No. Code Description Unit Qty Items Amount
1 591032 Description pc 1 84.30 84.30
2 614804 Description pcs 25 0.89 25.25
etc.
I would like to copy the amount in worksheet 2 to paste it to worksheet 1, by searching using code value. Advice: the codes are in different places in worksheet 1 & 2
View 3 Replies
View Related
Jul 25, 2007
I have a workbook with 3 sheets. AP, Move, Match. AP & Move will be about 40,000 lines.
I need a macro that will take the data from those two sheets and match them up on the match sheet by column A Line by line with all data moving over. An example is attached.
I'm not sure if this is possible, but please let me know if you need more info because I really don't want to do this manually. Anything that doesn't match I just need a blank line. I can add the true-false formula, but if it would fit in the macro that would be cool to.
View 7 Replies
View Related
Apr 18, 2008
I am trying to find a way of comparing entries in one spreadsheet to another spreadsheet and generating a third sheet of those that do not match.
As an example, I have a spreadsheet of approved supplyers, with name, reference and date in each column, and a speadsheet of used supplyers, some with references and some without. I want to compare the supplyers used to the approved supplyers list by reference number (which are in the same format), and produce a third sheet listing all those that do NOT match e.g. unapproved supplyers.
I need to make sure that the third spreadsheet only lists each seperate supplyer once, even though they may have been used several times, AND it must also include supplyers without a reference number.
I will use this to compare many spreadsheets with the same data, but of varying length and would like to use a macro to perform this function.
View 6 Replies
View Related
Jul 15, 2014
I am trying to copy a row based on the value of a cell.
I have two sheets in my workbook and on sheet 1, I have a part number and a description. On sheet 2, I have part numbers again, but this time I the description is broken up into the format I need.
What I am trying to do is have excel search on sheet 2 for the part numbers, then copy the information that corresponds to the part number into the correct column.
I have tried using Vlookup. But if the part number in row 2 on sheet 1 match the one in row 8 on sheet 2, this will copy over the data from row 2 whereas I need row 8.
If this would be more doable using VBA, that is fine by me. I haven't been able to figure out anything in VBA or in excel formulas up to this point.
View 7 Replies
View Related
Feb 18, 2014
I'm using the code below to compare columns on two sheets (1 column for each) and where there is a match, copy data from the 'Source' to 'Destination' sheet.
[Code] ...........
The code works fine, but I'd like to amend this, but I'm a little unsure about how to proceed.
The script currently compares column C on the 'Source' sheet with column D on the 'Destination' sheet and where a match is found copy column G from the 'Source' sheet and pastes this to column O on the 'Destination' sheet.
I'd still like to copy and paste the same columns, but I'd like to compare two columns from each sheet, so from the 'Source' sheet compare columns C and E to columns D and J on the 'Destination' sheet.
View 2 Replies
View Related
Jan 8, 2008
Does anybody have a code snippet to search and compare 2 sheets.
I want to read the value in a cell on the first sheet, then search the entire second sheet for a match, if it does match then copy the value from certain cells on the second sheet to the row on the first.
View 8 Replies
View Related
Mar 11, 2008
I have to write a macro that will copy the values of 'Items' in 'worksheet 2' to 'Items' in 'worksheet 1' ONLY when the 'Title' value is matching in both worksheets AND the value of ' Heading' in worksheet 2 is 'Entry1'.
Example:
Worksheet 1:
Title |Items
David
Bill
John
Worksheet 2:
Title |Items |Heading
David |A, B, C |Entry1
David |A, B |Entry2
Bill |A, B, C |Entry1
Bill |A, B, D |Entry2
John |G, H, J |Entry1
Gerry |G, H, R |Entry1
From the above data, I want the macro to compare 'Worksheet 1' with 'Worksheet 2' and only copy the 'Items' that have a matching 'Title' AND a 'Heading 1' value of 'Entry1'
So the final result should be:
Worksheet 1:
Title |Items
David |A, B, C
Bill |A, B, C
John |G, H, J
I have seen examples of compare used but not sure how to apply it to my case.
View 8 Replies
View Related
Apr 18, 2008
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
View 2 Replies
View Related
Jun 10, 2014
I have fixed data:
Michael = Resident
Joan = Intern
Patricia = Consultant
James = Nurse
what I want is every time the name (eg Michael) appears in column A, the title (resident) auto fills in column B. Do I need to put a data source for this?
View 14 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
Mar 16, 2009
I was able to use the IF function to match all of the sells in each work sheet but have been unable to figure out how to pull the SYSTEM# from each MASTER into the inventory sheet matching the CCSD row D.
I was able to figure out how to add the IF function to the individual worksheets but I have no idea what function would pull the SYSTEM# from the matching MASTER worksheet.
I'm attaching working document I have so far I was able to use the count function to add up quantities and the conditional format to set up the formats.
View 6 Replies
View Related
Aug 30, 2009
I have a table with names in column 1 and the date as row 1. The corresponding cells contain the data I want to link to in another sheet and display them by the data/date
Ex,
Name 01-Sep02-Sep03-Sep
bob A1 A1 "blank"
joe A2 "blank" A2
steve A3 A3 A3
I want it to display in another sheet with column 1 data and row 1 as date if the data has a match versus that date;
01-Sep02-Sep03-Sep
A1X X
A2X X
A3X X X
The data is in list boxes.
View 2 Replies
View Related
Feb 2, 2010
Macro that cut entire row to new sheet if cell data is matched.
For example,
Column A Column E
001 AAA
002 BBB
003 CCC
004 AAA
005 CCC
006 DDD
From sheet 1, A & C matched criteria, cut entire row and paste in new sheet with same header.
View 9 Replies
View Related
Jun 8, 2008
In a sheet from A:E, the headings on the first row are:
ID, Name, Gender, and Age.
I enter the data in sheet “DB” and I want to retrieve the data in sheet “Report”. I want to lookup the data range for each ID listed in Column A and retrieve all data from the matching row in a report form/look.
I have tried to use the vLookup formula, but when defining the range of the column (A2:A), it would return “0”. When defining only the range that contains data, it displays the correct information....
View 6 Replies
View Related
Feb 13, 2014
I have 2 worksheets, A and B. In both worksheets there is common data in column A (account ID). I would like to find a way to return all of the data for the matching row in worksheet B and have it pasted into the matching row in worksheet A.
So in the example below, I am looking for a function that will match on Account ID in both worksheets and then paste the results from Dataset 1, 2 and 3 into the row with the matching Account ID in worksheet A.
Worksheet A
Account ID
Column to paste matching rows from Worksheet B
1
2
Worksheet B
Account ID
Dataset 1
Dataset 2
Dataset 3
1
AAA
BB
CC
4
EE
DD
FF
View 1 Replies
View Related
Dec 20, 2013
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
Here is what my formula looks like now.
=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")
Whenever I try to run it an error message comes up and highlights the match function name.
View 12 Replies
View Related
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Jul 14, 2009
I need another big macro to search a different workbook "database" for a match. An example of what the "drawing number" will look like that the macro will search for is;
View 5 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
