Comparing Two Columns And Display Not Matched Entries
Jun 17, 2009
I've tried searching for an answer all over with out success. Here's my dilemma. I've got two columns (A and B) with over 1000 entries in each column with computer names. Most of the names are the same however some differ in the way that they might be in column A and not in column B and vice versa. What I would like to achieve is to compare those two columns and display the result in column C and D but keep the names of the in the retrospective column.
What I mean by that is that if a name was found in A but not in B I would like to have it displayed in column D and vice versa. If a name is found in B but not in A, to have it displayed in column C. If there is an easier of doing this, please by all means (i.e. highlight the name in A if missing in B and vice versa).
I have two columns of card numbers (16 digits) in text format, as column A and column B. In column C, I'm trying to figure out how to compare column A and B for matches, and display the match in column C, if there is a hit.
I have a table with names in column 1 and the date as row 1. The corresponding cells contain the data I want to link to in another sheet and display them by the data/date
Ex,
Name 01-Sep02-Sep03-Sep
bob A1 A1 "blank" joe A2 "blank" A2 steve A3 A3 A3
I want it to display in another sheet with column 1 data and row 1 as date if the data has a match versus that date;
I need to compare column A of Original.test worksheet to column A of Supplier.test worksheet. If there is a match then copy entire row of the corresponding match from Original.test to Matched worksheet. If no match then copy that row into OnlyInOriginal worksheet.
I have included the workbook and what the output should be. Hope it makes sense. ozgrid.xlsx
I have 2 columns worth of data (ie: B and C). I want to see if there are matches AND if there are matches, I want another column's data to be shown (ie: A).
Columns B and C are peoples names and column A are employee numbers. Sat around bouncing ideas off coworkers and we could not figure anything out.
I have 3 times series data in excel (returns on stock, market return and risk free return), each has their own date corresponding to its return, so 6 columns all up.
Imagine it like this: Date | Stock Return -- Date | Market Return -- Date | Risk Free Return
The problem is that the 3rd data set (risk free return), its date column mismatch the dates column of the first two (returns on stock and market). So the obviously solution is to basically get the third time series data to only show the same dates as the first two.
I want to use the first two data sets date's as like a benchmark for the third data set to only show those dates.
I have tried filter/advanced filter in Excel 2007 and spent ages on google/youtube but no luck; it wont let me try to match specific cells to filter out dates from a specific series of cells.
I'm trying to compare 2 worksheets with the same headers(NAME, ADDRESS, CONTACT NO...). What codes should I use that when there is a duplicated row in worksheet A and worksheet B, it will be deleted and when there are 2 names with different addresses and/or contact no, the whole row in file A will be obtained. Output should also be in another worksheet. It goes like this.
worksheet A NAME ADDRESS CONTACT NO JOE ABC 123 MIL XYZ 567 NIK LMN 234 NED QRS 456
[Code]...
So the output should be:
worksheet C NAME ADDRESS CONTACT NO JOE ABC 123 MIL XYZ 567 NIK LMN 234 NED QRS 456 JIM JKL 345 SAM FGH 789
If i make the listfillrange of my combobox a named range, is there a setting in the combobox that allows it to ignore any blank cells in the named range.
Lets say my named range is cells A1:A5 but only A1 has a value, the rest are blank.
The combobox drop down menu will display the value of cell A1 and then 4 blank rows. Can i make the combobox igoner the blank rows and only display cells A1 in the drop down menu?
I have a worksheet called 'Letters' with data stretching from A2:W5000. I need a Listbox that will display only those entries that fit the following criteria;
Columns A and O have data in them, Column V does not. The other columns can be disregarded for the purposes of this project. Additionally, is it possible for the Listbox entry to show any formatting that appears on the sheet? What I mean is, I have a conditional formatting set up on the sheet to show any duplicate entries, for example if the entry appears twice the cell fill colour is yellow - I need that to be shown in the Listbox too if it is possible.
I'm trying to create a chart that will display dates along the vertical (y) axis and time (on a 24-hour timeline) on the horizontal (x) axis. Ideally, I'd like the chart to show the various time entries on each date, perhaps represented by a point or other mark at the appropriate intervals corresponding to the time entries for each date. Failing that, a Gantt-style chart that shows a span, represented by a bar beginning at the earliest time and extending to the latest time entry for each date would be useful....
Hoping someone would be able to help me with this. I have a sheet (example attached) and this sheet has a number of varying description types in the W coloumn (usually approx 10,000 rows). This field is manually input so there could be spelling mistakes and/or non standard descriptions.
What I would like, if possible, is a macro that would look at the D column and if this is 'GENERAL LEDGER', it would then look at the W column.
An input box would come up, and would list the different descriptions it found in column W, and number them. It would only list each different description once.
e.g.
1. Bank charges 2. Bank charge 3. Cash 4. Fund Custodian Fees 5. Fund Manager fee 6. Interest income cash account 7. Interest income cash acc 8. Miscellaneous expenses 9. Miscellaneous income 10. Other income 11. Sec lending comm 12. Sec lending commission income 13. Tax Reclaimable - Dividends 14. Withholding tax dividend
The user would then be able to type in the corresponding numbers, if possible seperated by a space, comma or semicolon and the macro would then run through the sheet and delete the entire row if D was GENERAL LEDGER and W was the selected description.
I am trying to do 2 things involving data validation. 1) Count the number of entries in a data validation dropdown list and display a result. 2) Use an If statement to pull the formatting from a cell into another cell.
An example would be if Cell A1="A", then show the drop down list associated with cell or sheet "!ryanB2". Alternatively, I would like to also display the number of entries in the drop down list.
1) if Column M has the value "School" then corresponding value in column N should have oly "Bus","Subject","Teacher". if values in Column B other than "Bus","Subject","Teacher" then the cell should populate RED Color.
2) if Column M has the value "College" then corresponding value in column N should have oly "Box","Madam","World". if values in Column B other than "Box","Madam","World" then the cell should populate RED Color.
I have a table with many columns of data on sheet1
Is it possible to have sheet2 have ... oh I dont know... say 5 columns. In which I can choose the headers that correspond to the headers in sheet1. Therefore comparing the columns that I want simply by changing the header?
What I'm attempting to do is analyze data on spread sheet. I've attached an example. what I need to do is compare columns "E" and "I". But I have numerous means of comparing the data. I think I will need three different formulas which is okay and am unsure if VBA is better. For example: I compare "E2" and "I2"...ect: 1) I would need to compare complete cell 2) I would need to compare the first three digits 3) I would need to compare the middle digits If you towards the end you can see that some will compare to a BLANK cell if column "E" is ever blank. I first tried using countif but couldn't get it done. I only need totals that do not match in this category.i.e. 25 of 140 do not match.
I have currently browsed the forums and have came up with a code to compare two columns from two separate excel books and then highlight anything matching with the CompareRange. Here is a few more details about the problem:
- I have two excel sheets. And data like this in each sheet:
(First Sheet) (Second Sheet) -A B N O -7 .7 3 .56 -6 .6 8 .45 -5 .5 9 .55 -4 .4 11 .2 -3 .3 8 .22 -2 .2 9 .55 -1 .1 8 .54
As you can see, given this example nothing should be highlighted once the macro is run since nothing from Column A or B from the first sheet matches directly with Column N & O from the second sheet. The problem is that with the macro (module) I have come up with will highlight "3" from Column A and ".2" from Column B, just because they appear in Column N & Column O respectivally. What I want: I only want a number to be highlighted if both the numbers "7" & ".7" are matched in the same row of Column N & Column O on the other spreadsheet. To be a little more precise, I'll give an example. Say I edited the data to be like this.
(First Sheet) (Second Sheet) A B N O 7 .7 3 .56 8 .45 8 .45 5 .5 9 .55 11 .4 11 .2 3 .3 8 .22 2 .2 9 .55 1 .1 8 .54
With this data, I would want the second row of A & B ("8" & ".45") highlighted, while my error "3" of Column A and ".2" of Column B is not highlighted. Also, I would like it if row 4 of Column A & B ("11" & ".4") is not highlighted at all either, just because in O it is .2 and in B it would be .4 even though the 11's match. Attached is the macro/module I have entered in which is working kind of correctly but producing the mistake. And also, (kind of a lesser problem), both the files with data will have the same header, example would be if Column A & Column N both had "Dogs" as it's title in Row 1 and Column B & O both had "Cats" as it's title in Row 1. Is there anyway the macro can be adjusted so it compares those two columns between the two workbooks without me even having to select or assigning a range?
HTML Code: Sub Find_Matches() Dim Column1 As Range Dim Column2 As Range
I have column A which contains a range of part numbers, and column B is an On Hand quantity of that part number.
Column C is just like column A, in that it contains the same part numbers but it has about 1,000 additional part numbers that are obsolete. Column D has the On Hand quantity for Column C.
Column A and B are old information as far as the On Hand quantities, where Column C and D are up to date On Hand. The problem is the old outdated part numbers in column C.
How do I make column A and column C match, but not lose their respective On Hand quantities? I know this sounds discombobulated, but basically I need column A's part numbers, with column D's on hand quantity.
I'm trying to compare addresses in a worksheet, column A and column C have the addresses in them, in column A there are 44063 rows and column C has 43751 rows , both columns should have the same number of rows in each column because they should have the same number of addresses in each column but they dont so what i need to find out is which addresses from column A arent in column C and which addresses in column C arent in Column A and have the result put in column D.
workbook1 column A has tag numbers, workbook2 column A also has tag numbers. I want to compare the 2 columns and if the tag number in book 1 is also in book 2 i want it to return 25B-F138-28-01 in column B workbook1.
I have need to do a comparison of 2 values located in different columns. As this is almost impossible to describe in text format, I have included a spreadsheet showing exactly the problem. Im sure the solution will involve INDEX and MATCH but every permutation I have tried has failed (possibly theres another way?).
with hello and regards two all members and administrators i have this table COUNTRY1EXPORT$COUNTRY2IMPORT$SAME CODEEXPORT$IMPORT$30% MINOR 1019011710190294 102107410210138 10290161029029 10511271051111 105191271051970 106391271063947 10690191069047 ………… ………… ………… 9617001996170018 9618005589618001 97011097097011027 9701901169701903 97050009705003 970600097060091,969
Column A: Country1 Export Code Column B: Export value for Country 1 Column C: Country2 Import Code Column D: Import value for Country 2 ------------------- NOW --------------------- i want to fill in Column E to H with a macro Column E: same code in Column A and Column C Column F: export value for same code (from Column B) Column G: import value for same code (from Column D) Column H: 30 percent of Minor Value for example if F3 is 9000 and G3 is 1000 then H3 will be 2700 that is 30 percent of F3
I need to compare data across two columns: the date a claim was filed (column T), and the date it was resolved (column AH).
On my summary worksheet, I'm displaying the claim details for each month. I need to show how many of the claims filed (T) in each month are resolved (AH) - and for this output I'm not concerned about when they were resolved. This lets us track if there's still money due to flow out of the coffers for old claims. For example, there were 5 claims filed in July, and 4 of them are resolved. I want my summary tab to return a value of "Completed" beside July when I enter the resolution date for that last one, and "Pending" until then.
All the fields I'm describing are formatted as dates - including the name of the month (eg, "July" is displayed because I've put a custom format of "MMMM" on 7/1/08).
I've been playing around with countif and sumproduct but can't quite figure this one out.
As you can see there are certain numbers that are missing between column B and A. I want to know which of the numbers that are present in column B are missing in column A ...any handy calculation ?
I have data in column A which is the correct data. I also have data in other columns that I would like to compare to column A. If the data is the same, then it moves beside it, if not then it leaves a blank cell.
I have looked for macros and formulas to do this for ages but i cant seem to find one. Here is an example
BEFORE
A B C D 1 1 2 1 2 4 3 2 3 5 4 4 4 7 5 6 5 - - 7 6 - - - 7 - - -
AFTER
A B C D 1 1 - 1 2 - 2 2 3 - 3 - 4 4 4 4 5 5 5 - 6 - - 6 7 7 - 7
Right now i have a list of data in text format....they are stock tickers. One column is about 2000 entries long and the other is 500 entries long. I need to compare the two columns together and highlight the entries in the long column when they match to an entry in the 500 column. I have tried so many different formulas and conditional formatting on my own and can't figure it out
I want Excel to compare two columns of numbers. Column R has 1000 entries, beginning with the number 1 and ending with the number 1000. Column S will have from approx. two hundred to as many as six or seven hundred entries, looking something like this: 3, 5, 6, 10, 11, 13, 14, 15, 18 . . . . . . 990, 992, 995, 996, 999, 1000. I want Excel to compare column S with column R and display the difference in Column T. Column T will therefore look like: 1,2,4, 7, 8, 9, 12, 16, 17, 19 . . . . . 899, 991, 993, 994, 997, 998. I have to do this multiple times, does Excel have a built-in function(s) that can do this or do I need to write a macro? The numbers can be formatted as text if neces- sary
I'm trying to determine if one date meets the criteria to be considered 'on time'. I have two columns: estimated completion date and completion date. I want to compare the completion date to the estimated completion date and if completion date is <= completion date but is NOT = 1/1/2099 then I met my date. I've tried this several different ways and problem is I cannot make it work.
When estimated completion date is 1/1/2099 'on time' should be 'no' When estimated completion date is not 1/1/2099 but is greater than completion date 'on time' should be 'no' When completion date is <= estimated completion date and estimated completion date is not equal to 1/1/2099 'on time' should be 'yes'
And I have a null date to deal with also but if I can satisfy the first 3 criteria I can manipulate the null values manually.
