I try to catch the maximum number of a cell series, for example: I have some number in the colum D and I need the maximun numbers in the colum E, but i want or like, this function found only the maximum numbers of some cells... It's best if you look the attached file Max number example.
A B C D E
Eq 12-->this is the Max number of Eq1
0.02 Normal1
0.02 Normal1
0.07 Normal1
0.03 Normal1
0.08 Slight2
0.03 Normal1
-
Alt 25-->this is the Max number of Alt2
0.31 Serious4
0.01 Normal1
0.01 Normal1
0.01 Normal1
0.05 Normal1
0.03 Normal1
0.04 Normal1
is used to generate data. If there is only one data in the set, then it returns a #VALUE! Error message (as expected)
The below formula is then used to show the absolute value of that answer in another set of cells
=IF(N(CO23)=0,"",(ABS(CO23)))
The problem being, I do need the absolute value of the data from those cells, but not the error code because it mucks/stops up other formula:
=MATCH(MAX(B52:AD52),B52:AD52,0)
>>The cell references may differ, but the formula is the same for all<<
Does anyone know of a way to get the second formula to change #VALUE! for an empty cell, as the answer, when the #VALUE! error is generated, but transfer all numbers (where there are any) in tact!
I am running a sales spreadsheet that requires sales entered each day. I use a simple formula to run a continuous total starting at Monday and ending Sunday (1st cell for sales input is B4, second D4, third F4 and so on. 1st Cell for accumulated sales is C4, second E4 and third G4 and so on.
I use B4+D4 to caluculate the running total in E4 or example,and to eliminate that total appearing in G4 where the next formula is B4+D4+F4 I precede that with an IF formula IF(E4=0,'', ). This way I only show the current Week to date totals, not the upcoming days in the rest of the week. My problem lies in Holidays. If for instance D4, the Tuesday was a holiday and I enter either "holiday" or just leave it blank, the rest of the weeks formula will not work. I get a Value message. How can I achieve my goal of getting a daily week to date total without having it show in the upcoming days AND have a holiday in there too?
I have created two userforms which allows people to log-in to the worksheet.
The code works great on the first go, sometimes even twice, but after a while I get taken to the VBE and shown the message "Code execution has been interrupted". And highlights a certain part of my code (highlighted in red below).
I will copy all of the code relating to the userform below.
UserForm Code
Code: Private Sub CancelButton_Click() Unload Me End Sub Private Sub ClearButton_Click() TextUsername.Value = "" TextPassword.Value = "" End Sub
There is definite problem, as the "Code execution has been interrupted" error message appears seemingly at random (although if the workbook doesnt change it is the same points), and for no reason.
If I click the continue button the macro runs exactly as planned, but still there seems to be no rhyme or reason as to why this happens!
Now..when I run any of my macros, I get the following message.. "Code Execution has been interrupted".
I'm not sure why I'm getting this message but it happens everytime I run ANY macro. Note that if I hit "Continue" every time it gives me the option, I am able to successfully run the macro, but obviously, I shouldn't have to do this.
I wrote a very simple macro in an Excel file a few months ago. Worked great. Worked on my computer, and worked on a dozen other people's computers perfectly. Now, months later, ONE person is getting the error message 'Code execution has been interrupted' every time she runs the macro. I've tested it on my computer with Excel 2007, and it worked. Tested it on another computer with Excel 2003 (offending computer has Excel 2003), and it worked again. So I tested a third computer on Excel 2003, and it worked again. I'm 100% positive the macro code isn't causing this error. This makes me think that it's related to an application setting that was changed somehow.
I have been trying to track down why this message keeps on popping up, doesn't matter what excel file I open it always pops up, code will halt at different times in the code.
i have been working on 2 sheets receiving and selling item and QTY, or in other words i have a Stock IN sheet and a Stock Out sheet
is there some sort of a formula which links 2 cells, columns, together in a way that, if one cell's number increased the other would decrease automatically ?
say iv set 50 in cell a1, i want to set 10 elsewhere and the 50 in cell a1 will automatically decrease from to 40
The included, small database is formatted as text. It is a text feed from an outside source. I simply want to format the cells into either numbers or general format but not text... seems simple, and it should be, but the only way I can get this done is to go to each cell and access the formula bar and re-enter the number by pressing Enter.
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I need to know wich formula or VB method, I have to use to count the number of cases in a range of colomns and rows C4:G107, have the same number. For eaxample how many times do I have number 1 and so on...
I have a similar question regarding coloring of empty cells between two cells with specific numbers as posted in below thread : [URL] .....
This is exactly what I want. But here I have some problem with formula.
=COUNTIF(A1:Z1,1)=1
Above formula could pick cell value 1 and color the empty cells in a row between the cells having value=1. But if I want to use the same formatting for other numbers like 2 or 3 it doesn't work.
For example in row(A1:Z1) I have A1=1, D1=1, and F1=2, K1=2, and O1=3, U1=3
I required multiple conditional formatting that could color the cells based on values first from A to D then from F to K and finally from O to U.
I'm using above formatting it works with cells having values 1 but its not working for 2, 3 or any other cells values.
I have already tried replacing 1 in above formula with 2 and 3 but it doesn't work.
In my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)
But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.
I am trying to hyperlink all Worksheet2 A cells to worksheet1 A cells according to their row number. I have tried to create a Hyperlink in A1 and drag it down but what happens is that hyperlink links to same cell adn doesnt change cell number whilst dragging.
creating this code or fomatting in my excel file. I want to fill color in cells between the two cells that has value of say "1" or anything in it. There will be only 2 numbers at any time in any row that has the value in it. All other cells will have value of "0" or can be changed to empty cells. So, the formula should check from say range "A3 to Z3" in row and for example it gets the first numbered cell in C3 then it start filling color from C3 cell until it reaches the other cell in that range that has the number in it. Say the row "A3 to Z3" has 1 number in C3 and other in cell H3 then it should fill color between this two cells from C3,D3,E3,F3,G3 and H3.
I have two columns of cells that need to be reformatted: B and C. In the B column excel is reading the cells as time (0:41:55.0), I need it to display those cells as a number like this: 00 41 55.0. In column C the cells look like this: 41 : 09 : 47.3. I need the C column cells to look just like the formatted B column cells (41 09 47.3) Also, even though they have the spaces, the numbers should be read by excel as one whole number (i.e. 41 09 47.3 would be used in a calculation as 410947.3)
I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
I am trying to add a number of cells according to a number in an adjacent cell. If cell A1 has a number in it and column b has a list of numbers, how do i only add the number of cells in the list to match the nmber in cell A1.
example, if a1 contains a 3 only add the first 3 cells in the list, if has a 5 only add the first 5 numbers in the list.
In my dataset above the cases finish after 12 months (hence why there is a maximum number of cases).
What I am seeking is a method to count along a certain number of cells, then sum the contents of those. For example, I would like to count the contents of up to 12 cells, then sum those 12 cells.
Where it gets difficult is as follows:
- In month 6, I am just counting the contents of 6 cells (months 1-6) - In month 12, I am counting the contents of 12 cells (months 1 -12) - In month 18, I am counting the contents of 12 cells (month 7 - 18)
I need to find a number (1, 2 or 3) and I am looking in two different cells for it. Now, Cell 1 might have the information; Cell 2 might have the information or BOTH Cells A AND B might have the information, or either cell (or both) might have different information. I can't do an IF/OR because I don't know which cell will have it, nor can I do an IF/AND for the same reason. I can't assume that they will both have the information -- so I can't just use a solution that includes a "divided by."
I need to store some numbers, all of which are prefixed by four or five zeros. When I format the cells as number, the zeros are erased. So, 0000012345 becomes 12345. The zeros are preserved when I store them as text, but I cannot do the functions that I need to do with the cells formatted as text.
