I have two macro's that I need merged together. Specifically, the macro Find75 is run first which produces a new sheet, Peaks Found, and then normally I would run the kTest macro to give the Final Results sheet. Need to get this all into one macro? Thus one macro to run would produce the final results sheet, without producing the intermittent step of producing the Peaks Found sheet.
View 2 Replies
Disclaimer: I know almost nothing about VBA or Macros. I started with them yesterday. I took the following code off Ron de Bruin's website. I am attaching his example spreadsheet. When you click on Test 2 it does everything I want BUT copy the header row over. The workbook I want to apply this too has 12 sheets++ which have the same exact columns and headers, but different row counts. Ron directed me back to his site and the following code:
View 3 Replies View RelatedI have a range of data, that I need to setup a smart macro for, but I need the macro to do the following:
Merge Rows if Column G is the same, merge shall be done in Column A, C, D, E, F, G, H, I, J, K, L, M, N, S, T, U, V, W, X, YNo Merge: Column B and O, P, Q, RMake SUM in Column L, M, N for column O, P, Q. The macro to run for the entire sheet, until first empty cell in column G
A
B
C
D
E
F
G
[Code]....
I have tried with a Pivot, but it doesn't work out, as I need to be able to make changes to all cells after the "merged" cells has been done.
creating a macro in excel that will merge data based on matching id's.
The spread sheet looks something like this
A B C D E F ...
1 12 X 12 2 1 4 ...
2 13 X 17 3 4 4 ...
3 17 X 21 1 1 2 ...
4 21 X 22 2 1 3 ...
.
.
.
I would like to move Cells C2,D2,E2... down to where
the number in column A = the number in Column C
So in this cas C2-End of the sheet where there is data will move down one row, and the same with C3.
I have been using the following code to fill data down a col. For example if a1=blue and a5=green and a7=red. The macro will fill a1(blue) down to a4, then take a5(green) to a6, then a7(red) etc.
Sub Filldown()
If ActiveCell.Text = "" Then
MsgBox "please start with a non-empty cell"
Exit Sub
End If
For Each x In Selection.Cells
If x.Text = "" Then
x.Value = x.Offset(-1, 0).Value
End If
Next x
End Sub
code works great, but I was hoping it could be changed so that instead of filling the data down it would merge the data down. So, in the example, a1:a4 would be merged leaving the word blue, a5:a6 merged, and a7:etc would be merged.
Is this possible?
The code to merge sheets to a master sheet runs great, however when I copy the code to the Personal.XLSB to have the macro available to use on every workbook I’m getting an error. The line of code is Application.Goto DestSh.Cells(1) and the error is Method ‘Goto of object’_Application’failed. This happen even if I create a new workbook with 3 sheets and only a few cells with information. The macro to mail the sheet works fine using the Personal XLSB.
View 11 Replies View Relatedthe code necessary to merge all open workbooks (each contains only one worksheet) into 1 workbook made up of all of these individual worksheets?
View 2 Replies View RelatedI have been looking everywhere and I can't seem to find what I am looking for. I want to create a Macro that will go into a folder, search every Workbook (each with multiple Worksheets), and copy and paste the data onto a single Worksheet. The data that I want will begin in Row 3 of each Worksheet (the first two rows are titles and headers). The formatting will be the same for each sheet.
The only other part is that Column G has the following formula in each cell that I would like to keep if possible.
Code:
=IF(AND(ISNUMBER(F4),ISNUMBER(D4)),"Complete",IF(ISNUMBER(D4),TODAY()-E4,0))
I have some records. I want to merge them through macro in a singel cell, like I have selected a range then I want to merge them in active cell with a comma.
View 9 Replies View RelatedI am in need of a macro to merge approx 30 csv files, kept in same directory. Csv files are identical format, have one populated worksheet, 6 columns, no headers. However, number of rows will vary. I would like to merge them to a separate excel workbook, with data stacked to one master sheet. Is it also possible to only bring over rows that have than 0 in column E. I have the following macro to merge however, it merges .xls files and it brings over all rows.
Dim ToBook As String
Dim ToSheet As Worksheet
Dim NumColumns As Integer
Dim ToRow As Long
Dim FromBook As String
Dim FromSheet As Worksheet
Dim FromRow As Long
Dim LastRow As Long........
I use the merge button a lot for a group of cells in a column. However then I have to edit the formula in the merged cells.
I'm hoping there is a macro that can be made to bring these together.
Here's an example of what I do:
select range C2:C4. Cell C2 contains the formula =sum(B2)
merge these cells.
edit formula in new merged cell to be =sum(B2:B4)
Can I group this process into one macro?
I wonder is there a way that I can transpose and merge calls by using macro?
View 6 Replies View RelatedI am trying a macro to merge cell without losing the data until I find a next cell with the data - This merging should be pertain only for the column selected. Is it possible to write a macro and preform this activity.
View 1 Replies View Relatedfor creating the macro As I dont have any idea about macro.
My question is that I just want to marge all the tab into one tab however some header in all the tab are dirffernet however I need one header.
I have attached the example file, in that tab named as "OUTPUT" that is what I needed by macro.
I'm using this Macro to merge 40+ reports. It works great except it keeps pulling the headers over.
This wouldn't be that big of a deal, except that for every report I merge I have to click "OK" approx 10 times because the lines have the same title.
Is there a way to prevent this?
Sub simpleXlsMerger()
Dim bookList As Workbook
Dim mergeObj As Object, dirObj As Object, filesObj As Object, everyObj As Object
Application.ScreenUpdating = False
Set mergeObj = CreateObject("Scripting.FileSystemObject")
'change folder path of excel files here
[Code] ......
i have three worksheets: "List 1", "List 2" and "New ist".I want to merge the first two sheets into third.
List 1:
I have this macro to go to a specific folder and open up all of the files in the folder and merge them into a worksheet.
I want to change it so the user can select the files to be merged.
Sub MergeFiles()
Dim path As String, ThisWB As String, lngFilecounter As Long
Dim wbDest As Workbook, shtDest As Worksheet, ws As Worksheet
Dim Filename As String, Wkb As Workbook
Dim CopyRng As Range, Dest As Range
[Code]...
Is there a way i can dictate to Word from an Excel macro that i want it to open, Start a mail merge, use a pre-made file as a template, use the excel file the macro is in as the source, get it through the whole setup of the Mail merge all the way to the print function?
View 9 Replies View RelatedI have data like Below Mentioned in column A and Column B.I Want to Merge
and Center the Data in Column based on column A.
For example; I want to Combine the Cell i.e b2 and b3,B4 to B7,No Need to merge B8 Because A8 have a Same name But Differnet City. and so no.
I need a Macro.I have 6000 data in one sheet.I have 18 Sheets like this
DEALER NAME
A M MOTORS MALLAPURAM8
A M MOTORS MALLAPURAM
AALIANZ AUTOMOBILES NEW DELHI7.35
AALIANZ AUTOMOBILES NEW DELHI
AALIANZ AUTOMOBILES NEW DELHI
AALIANZ AUTOMOBILES NEW DELHI
AALIANZ AUTOMOBILES Noida15
ABHARAN MOTORS UDUPI7.88
ABT MARUTI CHENNAI7.89
ABT MARUTI CHENNAI
ABT MARUTI CHENNAI
ABT MARUTI CHENNAI
ABT MARUTI CHENNAI..................
This macro, enabled in Excel, is part of a chain of macros and will open Word, run the mail merge, save and close Excel. However, there is a macro in Word that I need to run but don't know how to activate it. Is there a code that I am missing that can be added to the end of the macro included?
VB:
Sub Mailmerge()
Dim wd As Object
Dim wdocSource As Object [code].....
I want to set up a one step button in an Excel workbook to open up a Word Mailmerge Document that I have already set up complete with Excel data source. I have used this code so far but it's not working. What else do I have to do?
Sub OpenWordMailmergeMasterB()
Set appWD = CreateObject("Word.Application")
appWD.Visible = True
appWD.Documents.Open Filename:="X:Detention filesMail MergeLesley's MailmergeMASTER Interim Report.doc"
'To Run the Mail Merge
'Data source is a range name in Excel workbook called "MailmergeReport":.....................
See attached the example worksheet. I am wondering if there is a way to write a macro that will change data from individual strings within a cell row to merged and centre data for that set of data. The issue is the data in the row will be varied i.e. sometimes there will be 20 x 2013 other times there may be 22 X 2013 etc. however, the data will always be fixed in the same row on the worksheet.
At the moment the best I have is a recorded macro, which really doesn't work too great and I end up fixing it constantly.
I'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.
FYI, I have named my merge cells to "myMergedCells"
[Code] .....
Does anyone have a VB macro that will copy information from a cell (this will be variable based on criteria) and paste it into the middle of another cell that contains HTML code?
The criteria for the copy/insert/paste is that the information in the cell that is to be copy/inserted must match up with the correct number (part number).
I hope this makes sense. I have attached an example spreadsheet. (Pictures are worth 1000 words. ) Hope someone can help. I checked this site and couldn't find anything that was solved that matched the specifics.
I have two columns, which have different length and in which there can be three types of data:
The data also in the first and the second column, so it is an old data.Second is, that the data is in the first column, but not in the second, so it is old, but it was solved.The third type is, when the data is in the second column, but not iin the first, so it is new data.
My task is to regularly update the list (so I have to merge the new and old columns), to see in which conditions the data is, but not to delete any of them (only the recurring, so if it is old, then it must not be listed two times).
I am trying to merge two different databases in the next week. The problem I am running into is the name from 1 database isn't always the same on the other database.
I want to merge Database 1 with Database 2 and create a relationship with them both by using the database 2 internal #. As you can see in my table database 1 has similar names to database 2 but they are not exact. I want to match these names and have the formula on match tell me what the database 2 internal # is. I have also uploaded a sample excel doc with a note in B2.
database1
Herb Chambers Ford of Braintree
Herb Chambers Honda of Seekonk
Dimmitt St. Petersburg
Database 2 matched internal #
Database 2
Herb Chambers Ford of Braintree (Dave Dinger Ford)
Herb Chambers Honda Of Seekonk (7-FI)
Dew Cadillac (Dimmitt of St. Petersburg)
Database 2 internal #
15360
15301
25413
How can I merge cells in the same row so when I sort a column (A>Z for example) the contents of the row near the selected one change position as well. I paste a picture for example.
View 9 Replies View RelatedI have a need to merge cells in a row and there to be more than one line of data in the merged cell. I also format it to wrap text. But I found that when doing this with merged cells it won't automatically resize the height of the row to accomodate the wraped text. It can be done manually, but this is a pain.
View 13 Replies View RelatedI have a need to get the data from columns A and B and transfer to C but one line from A and second line from B and this successively until the end of A and B. They will have the same number of lines.
View 3 Replies View RelatedIs there any way that you can combine two worksheets or Excel files, for example:
WORKSHEET_1 has columns and values as:
firstname
lastname
city
state
WORKSHEET_2 has coulms with NO values as:
firstname
lastname
address
city
state phone
I want to take the info from WORKSHEET_1 and insert it into WORKSHEET_2 without specifying any columns since WORKSHEET_1 might sometimes have only 1 column and sometimes might have all 5 columns.
The purpose of this is to create a standardized Excel file that I need to import into a Database, however the users might have Excel files without all the columns required therefore I need to "standardize" the worksheet before being imported and have any black values import as NULL into the Database
