Disclaimer: I know almost nothing about VBA or Macros. I started with them yesterday. I took the following code off Ron de Bruin's website. I am attaching his example spreadsheet. When you click on Test 2 it does everything I want BUT copy the header row over. The workbook I want to apply this too has 12 sheets++ which have the same exact columns and headers, but different row counts. Ron directed me back to his site and the following code:
View 3 Replies
i have three worksheets: "List 1", "List 2" and "New ist".I want to merge the first two sheets into third.
List 1:
I have this macro to go to a specific folder and open up all of the files in the folder and merge them into a worksheet.
I want to change it so the user can select the files to be merged.
Sub MergeFiles()
Dim path As String, ThisWB As String, lngFilecounter As Long
Dim wbDest As Workbook, shtDest As Worksheet, ws As Worksheet
Dim Filename As String, Wkb As Workbook
Dim CopyRng As Range, Dest As Range
[Code]...
I have two worksheets with large amount of data.
Sheet 1 gives Store locations (approx 1000) and various types of revenue, (eg each Store Location may have many different rows of Revenue - Putney - Sales
Putney - Sundry Income
Putney - Donations
Sheet 2 gives Type of Store
Puntey - Charity
I want to merge the sheets so that I can see Store location, Store Type and Different Revenues. eg Putney - Charity - Sales
Putney - Charity - Sundry Income
Putney - Charity - Donations
I have 13 different worksheets with the same header columns, i would like to merge into one creating new work sheet. All the data in column A should keep on adding on the column A from all the worksheet and from column N going across. I have more than million records on each sheet
I have dropped the file on [URL]... for example
I have 447 worksheets in my workbook, I need to consolidate them into one sheet and transpose the data so that it goes into across rather than down. I really only need data in rows 19 to 40 but the data in 29, 30, 31 A to I needs to be in one cell.
View 5 Replies View RelatedI am trying to merge several imported worksheets into one worksheet so that I can build reports. In other words, sheets 1-3 are imported from other workbooks, then sheet 1, sheet 2, and sheet 3 (with the same header rows) will roll into sheet 4 with reports built from the merged worksheet. I understand how to import, but I need to merge the worksheets. Is there a macro to make this possible?
View 9 Replies View RelatedI am collecting data from 6 locations for the quarter and combining the information into a corp worksheet. Each quarter I need to copy information from 6 different files and paste it into the master file worksheet. The sheet I need to copy is named Substandard. The amount of information changes from each location (ie one may have 10 rows one 50 rows) so the number of the row to paste it into the master sheet changes. I would like a macro that opens the file Location1 copies the information from the substandard sheet opens the Master file pastes the information into the Substandard sheet closes the Location1 file, and repeats the process for all 6 locations. I would end up with all infomation in the Master file substandard sheet. I know how to manually record a macro to do this but the numer of the row to paste it into varies on the Master sheet depending on the amount of information from each location.
View 9 Replies View RelatedI am a CAD person, trying to edit a large spreadsheet for reading into CAD.
I need to merge 2 worksheets into a 3rd.
Then search and delete the blank rows. (There is only 3 columns in the document, but can be as many as 5,000 rows or more)
The Cad program does not like blank rows, so I have to delete them if users insert them, and there may be several in a row. (Users need only edit one of the worksheet, No. 2)
The 3rd worksheet must then be saved to a Tab-Delimited txt file in the same location on the network as the xls document.
I am able to select the worksheets and copy to a 3rd, but how to go to the end of the data, before merging the other data from the 1st worksheet into the third.
In my attached file, I've atttached a sample whereby in Sheet1 to Sheet3 I have data with the same format.
I want to copy all data with TD_SUB_ACNT_CODE = ETMY0100 into Sheet4. My actual data actually have more than 10 sheets and the sheet count can be more.
I did a search for " import text" and found some promising leads, but not exactly what I was looking for. I have tried running macros and looking at the code but don't know how to pass the file names from the the D47:D147 range to VBA(see below). I saw elsewhere that Excel can be told to create a temporary batch file, and that the batch file with the command "copy text1.txt+text2.txt+text3.txt all.txt" for example could be used to merge the 3 text files into a file called all.txt. I don't however know how specify the path where copy starts, to tell the batch file to look in subdirectories or to pass the file into Excel. I've posted this question yesterday to Yahoo Answers http://tinyurl.com/omers and http://tinyurl.com/rfww9 without much luck.
Below is the macro I would like:I have text files whose names are found in the range D47:D147 although without the appended ".txt" extension. The sheets can only contain one name sometimes, but on average 8 to 10, so in the average case only cells D47:D56 would have entries.The text files are found in the say H:Textfiles directory or subdirectories.I would like Excel to find these files, concatenate them with a row between each file, and paste the results into cell K251.Finally, the text import wizard should be used with a space as a delimiter and the last 3 columns (it's sometimes only 2) of the concatenated file, not imported.
I have two macro's that I need merged together. Specifically, the macro Find75 is run first which produces a new sheet, Peaks Found, and then normally I would run the kTest macro to give the Final Results sheet. Need to get this all into one macro? Thus one macro to run would produce the final results sheet, without producing the intermittent step of producing the Peaks Found sheet.
View 2 Replies View RelatedI have a range of data, that I need to setup a smart macro for, but I need the macro to do the following:
Merge Rows if Column G is the same, merge shall be done in Column A, C, D, E, F, G, H, I, J, K, L, M, N, S, T, U, V, W, X, YNo Merge: Column B and O, P, Q, RMake SUM in Column L, M, N for column O, P, Q. The macro to run for the entire sheet, until first empty cell in column G
A
B
C
D
E
F
G
[Code]....
I have tried with a Pivot, but it doesn't work out, as I need to be able to make changes to all cells after the "merged" cells has been done.
creating a macro in excel that will merge data based on matching id's.
The spread sheet looks something like this
A B C D E F ...
1 12 X 12 2 1 4 ...
2 13 X 17 3 4 4 ...
3 17 X 21 1 1 2 ...
4 21 X 22 2 1 3 ...
.
.
.
I would like to move Cells C2,D2,E2... down to where
the number in column A = the number in Column C
So in this cas C2-End of the sheet where there is data will move down one row, and the same with C3.
I have been using the following code to fill data down a col. For example if a1=blue and a5=green and a7=red. The macro will fill a1(blue) down to a4, then take a5(green) to a6, then a7(red) etc.
Sub Filldown()
If ActiveCell.Text = "" Then
MsgBox "please start with a non-empty cell"
Exit Sub
End If
For Each x In Selection.Cells
If x.Text = "" Then
x.Value = x.Offset(-1, 0).Value
End If
Next x
End Sub
code works great, but I was hoping it could be changed so that instead of filling the data down it would merge the data down. So, in the example, a1:a4 would be merged leaving the word blue, a5:a6 merged, and a7:etc would be merged.
Is this possible?
The code to merge sheets to a master sheet runs great, however when I copy the code to the Personal.XLSB to have the macro available to use on every workbook I’m getting an error. The line of code is Application.Goto DestSh.Cells(1) and the error is Method ‘Goto of object’_Application’failed. This happen even if I create a new workbook with 3 sheets and only a few cells with information. The macro to mail the sheet works fine using the Personal XLSB.
View 11 Replies View Relatedthe code necessary to merge all open workbooks (each contains only one worksheet) into 1 workbook made up of all of these individual worksheets?
View 2 Replies View RelatedI have been looking everywhere and I can't seem to find what I am looking for. I want to create a Macro that will go into a folder, search every Workbook (each with multiple Worksheets), and copy and paste the data onto a single Worksheet. The data that I want will begin in Row 3 of each Worksheet (the first two rows are titles and headers). The formatting will be the same for each sheet.
The only other part is that Column G has the following formula in each cell that I would like to keep if possible.
Code:
=IF(AND(ISNUMBER(F4),ISNUMBER(D4)),"Complete",IF(ISNUMBER(D4),TODAY()-E4,0))
I have some records. I want to merge them through macro in a singel cell, like I have selected a range then I want to merge them in active cell with a comma.
View 9 Replies View RelatedI am in need of a macro to merge approx 30 csv files, kept in same directory. Csv files are identical format, have one populated worksheet, 6 columns, no headers. However, number of rows will vary. I would like to merge them to a separate excel workbook, with data stacked to one master sheet. Is it also possible to only bring over rows that have than 0 in column E. I have the following macro to merge however, it merges .xls files and it brings over all rows.
Dim ToBook As String
Dim ToSheet As Worksheet
Dim NumColumns As Integer
Dim ToRow As Long
Dim FromBook As String
Dim FromSheet As Worksheet
Dim FromRow As Long
Dim LastRow As Long........
I use the merge button a lot for a group of cells in a column. However then I have to edit the formula in the merged cells.
I'm hoping there is a macro that can be made to bring these together.
Here's an example of what I do:
select range C2:C4. Cell C2 contains the formula =sum(B2)
merge these cells.
edit formula in new merged cell to be =sum(B2:B4)
Can I group this process into one macro?
I wonder is there a way that I can transpose and merge calls by using macro?
View 6 Replies View RelatedI am trying a macro to merge cell without losing the data until I find a next cell with the data - This merging should be pertain only for the column selected. Is it possible to write a macro and preform this activity.
View 1 Replies View Relatedfor creating the macro As I dont have any idea about macro.
My question is that I just want to marge all the tab into one tab however some header in all the tab are dirffernet however I need one header.
I have attached the example file, in that tab named as "OUTPUT" that is what I needed by macro.
I'm using this Macro to merge 40+ reports. It works great except it keeps pulling the headers over.
This wouldn't be that big of a deal, except that for every report I merge I have to click "OK" approx 10 times because the lines have the same title.
Is there a way to prevent this?
Sub simpleXlsMerger()
Dim bookList As Workbook
Dim mergeObj As Object, dirObj As Object, filesObj As Object, everyObj As Object
Application.ScreenUpdating = False
Set mergeObj = CreateObject("Scripting.FileSystemObject")
'change folder path of excel files here
[Code] ......
Is there a way i can dictate to Word from an Excel macro that i want it to open, Start a mail merge, use a pre-made file as a template, use the excel file the macro is in as the source, get it through the whole setup of the Mail merge all the way to the print function?
View 9 Replies View RelatedI have data like Below Mentioned in column A and Column B.I Want to Merge
and Center the Data in Column based on column A.
For example; I want to Combine the Cell i.e b2 and b3,B4 to B7,No Need to merge B8 Because A8 have a Same name But Differnet City. and so no.
I need a Macro.I have 6000 data in one sheet.I have 18 Sheets like this
DEALER NAME
A M MOTORS MALLAPURAM8
A M MOTORS MALLAPURAM
AALIANZ AUTOMOBILES NEW DELHI7.35
AALIANZ AUTOMOBILES NEW DELHI
AALIANZ AUTOMOBILES NEW DELHI
AALIANZ AUTOMOBILES NEW DELHI
AALIANZ AUTOMOBILES Noida15
ABHARAN MOTORS UDUPI7.88
ABT MARUTI CHENNAI7.89
ABT MARUTI CHENNAI
ABT MARUTI CHENNAI
ABT MARUTI CHENNAI
ABT MARUTI CHENNAI..................
This macro, enabled in Excel, is part of a chain of macros and will open Word, run the mail merge, save and close Excel. However, there is a macro in Word that I need to run but don't know how to activate it. Is there a code that I am missing that can be added to the end of the macro included?
VB:
Sub Mailmerge()
Dim wd As Object
Dim wdocSource As Object [code].....
I want to set up a one step button in an Excel workbook to open up a Word Mailmerge Document that I have already set up complete with Excel data source. I have used this code so far but it's not working. What else do I have to do?
Sub OpenWordMailmergeMasterB()
Set appWD = CreateObject("Word.Application")
appWD.Visible = True
appWD.Documents.Open Filename:="X:Detention filesMail MergeLesley's MailmergeMASTER Interim Report.doc"
'To Run the Mail Merge
'Data source is a range name in Excel workbook called "MailmergeReport":.....................
See attached the example worksheet. I am wondering if there is a way to write a macro that will change data from individual strings within a cell row to merged and centre data for that set of data. The issue is the data in the row will be varied i.e. sometimes there will be 20 x 2013 other times there may be 22 X 2013 etc. however, the data will always be fixed in the same row on the worksheet.
At the moment the best I have is a recorded macro, which really doesn't work too great and I end up fixing it constantly.
