I have data written in Cells B5, C5, D5 etc that changes as you add more column data
I am trying to figure out how to merge cells starting from Cell B3 based on used cells in row B5 to end of column.
Now I know that merging cells is usually not a good thing in VBA, but I'm working on a data report that just looks bad unless longer pieces of text can span several cells to minimize column width.
So here's the problem:
I have a column of 1's and 0's in columns E and F, and text in Column G. I want to merge the cells in columns G and H for that specific row if there is a 1 in either the E or F column for that specific row. And I need to do this for a long range...rows 7-5000. Any ways that VBA can do this?
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedI need to mine a huge spreadsheet of about 30,000 cells and make columns from specific words. As in.
I need to search for all words "table" even if the word is "My_table" or "aTable" and suck them into one column. I have to do this one several words.
Let me know if you have the solution. I am trying to write something but I am unsure of the syntax at this level.
The begining portion of this works fine, I have it moveing data from one column to another, but I then need it to combine two rows (BW and P) and then place that into column (O)...
View 3 Replies View Relatedi am trying to merge cells based on the input from another sheet. these input will change from month to month and i need the sheet to cancel the merge and merge again based on the new input.
Example.xlsx the file showing what i need it to do.
I have a list of values, some are like values, others are not. is there a way to have the column to the right automatically merge the cells which have like information to their left. Attached is a sample file. I want to be able to have the cells in column B automatically merge based on the values in column A. I'm not sure if this can be done, but figured I would ask before I spend hours merging cells.
View 2 Replies View RelatedI'm using the following code (found here: [URL]......) populate dates in row 13 for a dynamic Gantt Chart...
[Code] ....
It works perfectly to display daily dates in the mm/dd format. Now I want to have an overarching month/year displayed over the entire range for any particular month by merging and centering the cells above the month's dates the above code populates, and pull in the month/year formatted as mmm-yyyy. I've attached a mock up I did manually to convey the desired result.
MergePic.JPG‎
I have a huge document that looks like this
Column A______Column B_____Column C
100/12__________B___________$
100/12______________________@
100/12______________________€
250/13______________________€
250/13______________________$
I want to keep in ColumnA all three rows of 100/12, because it has a value in Column B in one cell-which is the criteria, and remove the 250/13 because it has no value in cell B.
I was assuming that merging duplicates in column A, and than remove empty from ColumnB.
Here’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
I have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
I have a spreadsheet that has columns stating both status and then further to the right in the row, currency totals. There are only two status options, Stocked and On Order. I need to add the total currency amounts based on this other column's listing and it must change if status changes.
(Put simpler:
Column A lists Stocked or On Order and Column B is the currency tied up in that row.
I need to make totals for the cells in column B based on the status listed in Column A and it must change when Column A is changed. This should result in two totals, one for Stock Status Currency and one for On Order Curreny)
I would like to write a macro to add cells in columns C,D,E,F,G & H based on the text (employee) entered in column B. For example I need it to add all the cells for "John S" found within column "C" and then total it at the bottom with a code JSSS (John S straight shop time) or JSOS (John S overtime shop) as per my example. The attatchment is a spreadsheet I use to total billable hours for our employees.
View 3 Replies View RelatedI'd like to merge (and position in the center) all identical rows within column A without affecting the columns to the right of it. I have attached a small sample of what I'd like to accomplish.
View 5 Replies View RelatedI am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I have a problem which requires a vba routine that is currently outside of my level of expertise...
Here is an example of the data:
TESCO GARAGE 3729
59
REF 177 1092098207 BCC
59
CO-OP GROUP LTD
60
[Code]......
I have a statement from an account (which happens to be the government) in which they list every invoice they are paying and each item on that invoice. But they don't have an invoice total. I'd like a way to add up the item totals for each invoice and put the total in column D. Each invoice could have 1 to 10 different items on it.
A(invoice#) B(Item) C(total) D(invoice total)
111 widget 1 $5
111 widget 2 $10
111 widget 3 $8 XXXXX
222 widget 1 $5
222 widget 5 $15 XXXXX
333 widget 2 $10 XXXXX
444 widget 5 $15 XXXXX
I had thought an IF formula would be the way to go.
I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
How can I merge cells in the same row so when I sort a column (A>Z for example) the contents of the row near the selected one change position as well. I paste a picture for example.
View 9 Replies View RelatedI've got a workbook with a ton of worksheets in it. Every worksheet has 4 columns a, b, c & d that I want to merge so that column a will be the contents of the 4 cells above seperated by _ so it will become a_b_c_d. not sure if im explaining this right but i think you'll get what i mean. i need to do that for every worksheet in the workbook
View 5 Replies View RelatedI say reluctantly because it seemed easy enough that I should have been able to locate it in the help file of VBA. Which leads me to believe I do not know how to search effectively in VBA, yet/still.
how to merge cells w/ the use of VBA.
Below is my Post and Answer by EE ....
I have a rather large amount of data that comes to me very frequently in a bit of a mess and I have a need to somehow do the following:
I need to look for a cell that has date text in the format of 3 characters for the month followed by a four digit year i.e.Apr 2009 or Sep 2009 along with one marked YTD.
The cell then needs to be merged with the 2 adjoining cells to the right.
This heading structure repeats itself frequently over about 700 hundred rows so it will need to repeat itself until all date looking cells and YTD's have been merged with the 2 adjoing cells.
i have a file i need to merge 2 cells. the first cell has street number. second cell has street name. and i need a space between the number and the name
View 9 Replies View RelatedI have sheet and this kind of data in two colums:
A B
1 Text
2 continues in different
3 rows in B column.
1 I want to
2 merge this
3 text in single
4 row.
1 1 in A column
2 means a new row.
1 How can
2 I do it,
3 maybe with
4 macro?
1 Again new row.
There are over 30000 rows in my sheet. So there must be way to do it some other way than manually with copy-paste method.
I want the representant to fill the form we have with number 1 or 0. The only things, it's some time My cells are merge for visual aspect of the form. I made it work with a single cell but now I'm facing a wall for merge cells. This is the code for a single cell:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("I9")) Is Nothing Then
Cancel = True 'Prevent going into Edit Mode
If Target = vbNullString Then
Target = "1"
Else
Target = vbNullString
End If
End If
End Sub
How we can automatically (with macro) merge & center cells with same value? For example if ranges A6, A7, A8 have the same value 09/20/06, find them & merge A6:A8 & get only one 09/20/06.
View 9 Replies View Related