Excel VBA - Merge And Center Cells Based On Date Values In Row Below

May 22, 2014

I'm using the following code (found here: [URL]......) populate dates in row 13 for a dynamic Gantt Chart...

[Code] ....

It works perfectly to display daily dates in the mm/dd format. Now I want to have an overarching month/year displayed over the entire range for any particular month by merging and centering the cells above the month's dates the above code populates, and pull in the month/year formatted as mmm-yyyy. I've attached a mock up I did manually to convey the desired result.

MergePic.JPG‎

View 1 Replies


ADVERTISEMENT

VBA To Merge Cells Based On Other Column Values?

Mar 19, 2014

Now I know that merging cells is usually not a good thing in VBA, but I'm working on a data report that just looks bad unless longer pieces of text can span several cells to minimize column width.

So here's the problem:

I have a column of 1's and 0's in columns E and F, and text in Column G. I want to merge the cells in columns G and H for that specific row if there is a 1 in either the E or F column for that specific row. And I need to do this for a long range...rows 7-5000. Any ways that VBA can do this?

View 4 Replies View Related

Merge And Center Only Column Labels Of Pivot?

Feb 9, 2014

When I use "Merge & Center cells with Labels" of a pivot table, It is merging Column labels as well as row labels. Is there a workaround to apply this feature only for column labels and not for row labels.

View 2 Replies View Related

Macro To Merge And Center Varied Range Of Data In Fixed Row

Jun 10, 2014

See attached the example worksheet. I am wondering if there is a way to write a macro that will change data from individual strings within a cell row to merged and centre data for that set of data. The issue is the data in the row will be varied i.e. sometimes there will be 20 x 2013 other times there may be 22 X 2013 etc. however, the data will always be fixed in the same row on the worksheet.

At the moment the best I have is a recorded macro, which really doesn't work too great and I end up fixing it constantly.

View 2 Replies View Related

Unable To Use "merge And Center","insert" In Unprotected Cells

Jun 2, 2006

I can choose some cells in a sheet to protect them and prevent any one to change.
it's supposed to change and edit in the other cells.

the problem which I face when I try to use " merge and center" or to insert picture or autoshapes ..etc. in unprotected cells!

View 8 Replies View Related

Merge Date From Adjacent Cells Inbetween Current Cells

Nov 17, 2009

I have 2 columns of data and want to be able to merge as follows

COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32

need to get result of

COL a
4123567
123.45
4125467
900.56
4356456
456.32

View 4 Replies View Related

Find Same Values And Merge In The Form Of Excel VBA

Oct 24, 2013

Of the form "packing list" page of the changes made to the necessary places "commertial Invoice" section is being transferred. So far, no problem. If you are loading only the truck. However, a truck, trailer or container are loading more than one, "packing list" Vehicle / Container Nos. are different. If you are loading more than one truck or container, "packing list" Vehicle / Container Nos. are different. This is not a problem for the packing list. But the "commertial Invoice" on the invoice values ​​that must be unique.

For example, from "the product 2" 50 pieces laoded to the truck and trailer have loaded a 25 pieces, in the "commertial Invoice", from "product 2" needs to write 75 pieces.

My question to you is this:

In the "Packing List" find duplicate products, to "commertial Invoice" Can we write to collect the amount of write one?

Second question:

In the form comboboxes' chage events are the same. Can we make change events one code?

View 7 Replies View Related

How To Merge Values With Blank Cells Above Or Below Them

Jan 20, 2014

I have a column which contains unique values and also blank cells between them. These blank cells are associated with the cells having value below them. e.g.

Say we have

COLUMN A

1004Z
blank cell
blank cell
blank cell
blank cell
1031Z
1305Z
1007Z
1046Z
blank cell
blank cell
1400Z
blank cell
1021Z

Suppose these above are 14 cells (A1:A14); I want to merge preceding set of blank cells with the values below them.... in this example I want to merge A2,A3,A4,A5 with value in A6...

Likewise A10,A11 merge with A12 to show value in A12.

I have only one column to merge values like this.

View 2 Replies View Related

Merge And Change Colours Of The Cells By Date?

Jan 27, 2014

excel.JPG

Is there any way to Merge the cell and coloured automatically by Date range same like above picture. In the Image:

"MERIAN FROM 1/1/2014 12:01:00 AM TO 1/2/2014 10:15:00 AM" is Merged and Coloured according to Date January 1 and Time 00

Same also...
"SILVER FERN FROM 1/2/2014 1:20:00 PM TO 1/3/2014 11:20:00 AM"

View 1 Replies View Related

Merge Two Cells Based On Criteria

Dec 19, 2007

The begining portion of this works fine, I have it moveing data from one column to another, but I then need it to combine two rows (BW and P) and then place that into column (O)...

View 3 Replies View Related

Excel 2007 :: Sum Cells Based On Date Range Input

May 28, 2014

I am using Excel 2007.

Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.

28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0

Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell

I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.

For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.

View 9 Replies View Related

Merge Cells Based On Used Cells In Column 5

Jan 7, 2014

I have data written in Cells B5, C5, D5 etc that changes as you add more column data

I am trying to figure out how to merge cells starting from Cell B3 based on used cells in row B5 to end of column.

View 6 Replies View Related

Merge Cells Based On Input From Another Sheet?

Jul 4, 2013

i am trying to merge cells based on the input from another sheet. these input will change from month to month and i need the sheet to cancel the merge and merge again based on the new input.

Example.xlsx the file showing what i need it to do.

View 8 Replies View Related

Draw Line From Center Of Cell To Center Of Another

Aug 13, 2008

Following is what I want to do:

Draw a line from the center of the first cell to the center of another cell.

View 3 Replies View Related

Excel 2010 :: Delete Duplicate Rows Based On Values Of Cells

Jun 17, 2014

I'm new to VBA and macros, using Excel 2010, and am trying to figure out how to delete all duplicate rows in a sheet where 2 or less of their values in column A is "1". I'd like have a script that is flexible enough to change to 3 or less if need be. I also have a header row that needs to be offset in the process.

A---B-
0--123 <-delete
0--123 <-delete
0--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321

or

A---B-
0--123 <-delete
0--123 <-delete
1--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321

View 5 Replies View Related

Excel 2013 :: Merge ALL Cells With Same Value In A Sheet (rows And Columns)

May 11, 2014

We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.

long story short, we ended up with an excel sheet like this: Screen_Shot_2014-05-11_at_4.png

Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)

I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.

But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.

I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.)

Screen_Shot_2014-05-11_at_46FDQO.png

I googled for days, i only found Visual basic commands i guess? that only merge same rows. and they were poorly made. beside that it didn't work properly. Method to do it automatically?

EXCEL 2013

View 3 Replies View Related

Excel 2013 :: Merge ALL Cells With Same Value In A Sheet (Rows AND Columns)

May 11, 2014

We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.

Excel sheet like this:

Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)

I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.

But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.

I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.) Any method to do it automatically?

EXCEL 2013

View 3 Replies View Related

Excel 2007 :: Lock / Unlock Cells Based On Values Selected In Dropdown List

May 15, 2013

I am looking to write a code to lock/unlock cells based on values selected using a drop down list (see attached Excel) For example if Netherlands is chosen as the Country (Column A), then except for the columns Amsterdam (column B) and Eindhoven (column C), all other columns must be locked. Similarly, if India is chosen as the country from the drop down list, then only the columns New Delhi and Mumbai must be editable for the user, the rest of the columns remain locked.

I tried tweaking some of the lock/unlock codes around, but got lost especially with getting to run the macro - still trying to come to terms with running a "Private Sub Worksheet_SelectionChange" function in the sheet from "Module"!

View 1 Replies View Related

To Merge Variable Number Of Cells Into One Single Cell Based On Criteria

Sep 19, 2009

Here’s an example of my data:

A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH

I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:

A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH

View 10 Replies View Related

Merge Cells: Select A Range Based On Two Variables Which Store The Column Numbers

Jul 19, 2009

I am trying to select a range based on two variables which store the column numbers. what I have is:

View 4 Replies View Related

SUM Based On Cost Center Wise

Jan 14, 2014

I need a sum of amount based on the Cost center & Category from the details table , can i have a formula to get them .

Please find the example amount in the attached excel sheet highlighted in RED Colour.

View 3 Replies View Related

Date Cells In Project Plan To Change Based On Other Cells Including Other Date Cells

Oct 31, 2008

This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.

I would like to have a seperate start date cell and a go live date cell.

The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.

View 9 Replies View Related

Shortcut Key To Center Data In Excel

Dec 4, 2012

Any shortcut key to center data in the current cell? Or if I write a simple macro (not very good at writing them), what would the vba code to use to center text in whatever cell I am currently in?

View 1 Replies View Related

Userform To Always Open In Center Of Excel Screen?

Apr 5, 2010

Is there any way to tell a userform to always open in the center of the excel screen? It always seems to open somewhere in outer space on multiple screen setups.

View 9 Replies View Related

Range With (Center Across Selection) Cells In It

Jan 30, 2012

I am trying to use Range.Find in a named range that has some areas where two cells are merged using the format "Center Across Selection"

Set rngTemp = wbMaster.Range("PnLDateRow").Find(what:=dDate)

I get a run time error 438 "Object doesn't support this property or method"

Is it not possible to use this method to find the cell in this range? I tried iterating through the range but that errors also.

View 1 Replies View Related

Cells To Align To Center/left/right

Mar 14, 2008

Here's a weird one: I can't get some of my cells to align to center/left/right. Both the buttons on the toolbar and Format->Cells->Alignment won't work. The kicker is that other cells on the same sheet will center/left/right just fine. Is there some kind of formatting protection I inadvertently set?

fyi, Excel 2003 on XP Pro, all fully updated.

View 9 Replies View Related

Excel 2010 :: Text Aligning Just Slightly To The Left Of Center

Dec 10, 2012

My current spreadsheet shows text that's aligning just slightly to the left of center. In the Format Cells menu under Alignment, I have selected Center for both Horizontal and Vertical. There is no indent. Orientation is 0 degrees. Text is set to wrap. Merge cells is unchecked. Text direction is Context.

When I double click a cell to change the text, it centers correctly as the cursor blinks. But when I click somewhere else and it stops blinking and allowing me to type in the cell, it aligns slightly to the left of center.

View 5 Replies View Related

Cells Not Responding To Left, Right, Center Arrangment

Jan 19, 2010

I think I did something but I don't know What. I select a cell that has a 20 font Size I enter a number it show at the 20 Font. Now when I go some ware else in the work unselecting that cell the number went to font 10 and droped to the left bottom of the cell. When I select the cell again and select the the left middle and right to move the number it does not responed. It happens everyware in the worksheet.

View 14 Replies View Related

Align & Center Text In Cells Vertically

Feb 22, 2008

I know how to center text from left to right, but how about from top to bottom?

View 3 Replies View Related

Excel 2010 :: Lock Out Trust Center Settings For Disabling All Macros?

Mar 12, 2014

There are some excel documents in a hidden folder that contain sensitive information. Shortcuts to these documents will be provided to users to open them and add data. These documents contain all kinds of macros as well. Once macro disables the 'Save As' feature so that the workbook can not be saved outside of the hidden folder, preventing to some degree a user from saving as a different name and emailing the document with the sensitive data.

This all works fine with Macros enabled. As soon as macros are disabled the 'Save As' prevention is bypassed and the workbook can be saved anywhere.

Is there a way for an administrator to lock out the Trust Center options for disabling all macros?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved