Merge To 1 Cell Decimals Places
Jan 28, 2008
Below I have this formula in cell A6, in the cells the formula refers to B6 thru O6 contains formula's also. There is text and numbers in the cells. The cells with numbers are formatted as number to 4 decimal places.
The problem is in cell A6 the numbers go to 15 decimal places. I don't know why but I need to keep it to 4 decimal places.
=B6& "" &C6&G6&H6&I6&J6&K6&L6&M6&N6&O6
G01G41X0.0125Y0.0125D(offset#)F0.39
This how cell A6 is after the inputs are in below.
G01G41X0.01249976025Y0.01249976025D(offset#)F0.386021052631579
This is how I need it to be below.
G01G41X0.0125Y0.0125D(offset#)F0.3860
Can anyone figure this out.
Wheather it is a formula or vb code
View 9 Replies
ADVERTISEMENT
Jun 23, 2009
I am having an issue with number format in my VBA code. The entire column of column D is format as ###.0000 (4 decimals places). There are certains cells which require zero decimal places. I am using the following bit of code, but it is not working correctly. It is still formatting the cell as 4 decimal places.
View 3 Replies
View Related
Feb 6, 2009
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
View 3 Replies
View Related
Oct 29, 2008
I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:
=IF(A2="","",(INT((LEFT(A2,3)+MID(A2,4,6)/60)*100000)/100000)&"d")
View 2 Replies
View Related
Jun 22, 2009
I am converting values from SAE to Metric and wish to retain the decimal places of the SAE value before converting.
My code below converts nicely but doesnt maintain decimal places.
View 8 Replies
View Related
Jan 16, 2010
What do I need to add to this code to set the decimal places to zero?
View 2 Replies
View Related
Dec 11, 2008
I am doing some calculations via Excel, and I have found that I get different results using a calculator. I know that by formatting the number, I can show as many or as little decimal places as I like in any cell, but can anyone tell me how many decimal places Excel actually uses when it's carrying out calculations? I have a feeling that the Excel results I'm getting might be more accurate than my calculator ones.
View 2 Replies
View Related
May 19, 2009
I'm trying to speed up some work on an excel sheet. The sheet converts degrees latitude and longitude to Northing and Easting coordinates, but right now we have to type them in directly.
For example, the degrees would be 81.0056 and I want to reference just the .0056 from the cell that contains the whole 81.0056 degrees. Is there any way to just reference character place three through seven of that cell? All I'll need it to do is copy it over, the rest of the program will convert it for me.
View 9 Replies
View Related
Feb 24, 2010
if I change the formatting of a cell to 2 decimal places, it appears as two decimal places (as it should) for example $88.88888 will show as $88.88
However, when I use this data in another application that displays this data it will display as 88.88888 still. I need to actually take the value and truncate it to 88.88 eg 8.8888888 will become 8.88
I have been using trunc by hand and wanted to try and find out if there is a way that I could write some sort of macro to do this for me each time.
View 14 Replies
View Related
Oct 23, 2008
How do I stop a user from entering more than 2 decimal places?
If I format the cell to "0.00" I can still type in 1234.1234 and it will display 1234.12.
If I select that cell, the value in the formula bar is still 1234.1234.
View 9 Replies
View Related
Jul 27, 2007
Is there a function in VBA that lets me increment or decrement the number of decimals of a particular cell? let's say i got a cell value of 7.123456 but excel only displays 7 on the cell. What if i want excel to display only 7.123? How can I specify the number of decimals i want on a particular cell (in this case 3)
View 2 Replies
View Related
Feb 25, 2009
I'm trying to clean up a very large list of last names. Only one individual cell, but that cell includes numbers, decimal points, and spaces inbetween the numbers. All I want left in the cell is the last name. I have just under 100,000 to do! How would I go about this? Using Excel 2007.....
View 2 Replies
View Related
May 10, 2014
AVERAGEIFS(X$2:X$1000,$AT$2:$AT$1000,1)& TEXT(BE2/BD2," 0%")
The formula is working , but the result is : 3.50239234449761 58% Formatting the cell did not work. Can these decimals be slashed?
View 5 Replies
View Related
Feb 27, 2014
I need a formula to take a number with several decimal places and round it up to two decimal places to either .33, .66 or, .00 if its above .66.
For example, 4.23423423423423 will be 4.33
4.43453453533434 will be 4.66
4.8353453453 will be 5.00
Lets say the number is in cell A1. What formula would do this?
View 3 Replies
View Related
May 29, 2014
content from form is captured via formulas to a CIMLoad format on another tab
Users keep entering four to six decimal places in weight value
I need to limit the cell to either whole numbers, or a maximum of 2 decimal places
The cell is formatted to two decimal places, but when you activate the cell it shows the full value they entered, and so does my CIMLoad
How to I limit the value in this cell to whole numbers or numbers with a maximum of two decimal places?
View 7 Replies
View Related
Dec 3, 2013
I have a list of cells that has two values concatenated. The first I would like to round to 2 decimal places, and the second is always a integer
Consider this formula..
Code:
=IF(SUMIFS('Analysis Data'!$I$5:$I$1840,'Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1)=0,0,SUMIFS('Analysis Data'!$I$5:$I$1840,'Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1)/COUNTIFS('Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1,'Analysis Data'!$I$5:$I$1840,">0"))
&"("&COUNTIFS('Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1,'Analysis Data'!$I$5:$I$1840,">0")&")"
In one cell this yields the value;
2.42553191489362(47)
In another it yields 2.975(40)
and so on..
I would like to format it to display as 2.43(47) and 2.98(40)
FWIW this means average of 2.43 games refereed per session in 47 sessions of refereeing.
View 3 Replies
View Related
Sep 8, 2009
I need a cell to restrict the input:
-Only numbers are allowed.
-No date posible.
-Any amount of decimals (they must all be shown in the cell).
I tried using the data validation and using the IsNumber() to restrict any non numeral input. The problem with this approach is that if the user enters a date; it apprears as a date format (eg: "5.May"). I'm using an european excel, where the decimal separator is a comma instead of a point; so if a user accidentaly types "5.5" instead of "5,5"; the cell will show "5.May".
I also tried the cell format/number/number format. The problem in here is that I dont know how many decimal positions will the input number have; and I need them all to be shown.
View 7 Replies
View Related
Apr 15, 2008
I have a pivot table of values displaying agency's performance based on their sales percentage to target. When the race is 'loose', and all companies are 1 or more percentage point away from each other, I format the values without decimal places. If two agencies appear tied, I add a decimal place to seperate them. Occasionally the race is really tight and I have to increase the format to two decimal places to seperate them. how to do this automatically?
View 4 Replies
View Related
Mar 5, 2009
I require a custom data validation formula to limit cell value to maximum of 4 decimal places.
0.0001 ok
0.02 ok
0.3 ok
0.12345 fail
0.123456 fail etc
View 2 Replies
View Related
Sep 28, 2013
I have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
View 7 Replies
View Related
Mar 22, 2009
I have data in two columns
Column A has values with names like -
John, Paul, Hena, Kumar, Paul, Hena, John in different rows
Colum B has day values - eg , sun, mon, tue, wed , thu, fri and sat
I want to insert a new column C with formula that returns
1. for every John, concatenate of all the day values adjacent to row of John eg "sunmonfri"
Similarly for all the values in Column A, Column C should reflect the concatenate values of Column B.
View 9 Replies
View Related
Feb 20, 2009
Have a data like this
350 352 353 362 364 I want to merge it into one cell
View 9 Replies
View Related
Dec 16, 2012
Trying to merge two formulas in one cell. I have two cells with different formulas in them. I try to merge both formulas in a third cell to show different results. Depends on the case. All solutions found in searches made ​​by me does not fit my case. I can not use pivot table and not concatenated. Just a simple merge both formulas in a third cell if possible.
Case1 :
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!E2:E5;MATCH(A3;FOLHA2!C2:C5;0)))
join to
VB:
=SE(�.ERRO(CORRESP(A3;Folha2!C2:C5;0));"";�NDICE(Folha2!I2:I5;CORRESP(A3;Folha2!C2:C5;0)))
Case2 :
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!G2:G5;MATCH(A3;FOLHA2!C2:C5;0)))
join to
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!K2:K5;MATCH(A3;FOLHA2!C2:C5;0)))
View 9 Replies
View Related
Apr 23, 2013
I want to count the merged cell as 1 on the same value regardless how many rows are in merge cells, for example column J5:J798 - i want to count the blank value but some of them were merge i want a result for the merge cell are 1 only not 5 or 6 or more.
View 1 Replies
View Related
Dec 16, 2012
I have two cells with different formulas in them. I try to merge both formulas in a third cell to show different results. Depends on the case. All solutions found in searches made ​​by me does not fit my case. I can not use pivot table and not concatenated. Just a simple merge both formulas in a third cell if possible.
[Code]....
Attached File : example.xlsx‎
View 14 Replies
View Related
Apr 12, 2006
creating a macro in excel that will merge data based on matching id's.
The spread sheet looks something like this
A B C D E F ...
1 12 X 12 2 1 4 ...
2 13 X 17 3 4 4 ...
3 17 X 21 1 1 2 ...
4 21 X 22 2 1 3 ...
.
.
.
I would like to move Cells C2,D2,E2... down to where
the number in column A = the number in Column C
So in this cas C2-End of the sheet where there is data will move down one row, and the same with C3.
View 3 Replies
View Related
Jun 26, 2014
Normally i have a row and data as below:
Item
Red
Comfortable
New
Car
1
and i would like to merge them into one cell like this(with spacing between them):
Item Red Comfortable New Car 1
Can VBA do this move?
View 4 Replies
View Related
Mar 10, 2009
I have a row of data. I want to merge it all into the first cell and have a line break between each line (from each of the cells).
View 13 Replies
View Related
Oct 27, 2009
I have excel data containing in column A "Plot number" which is repeated and other four column is land area and the next column is "Land Owner Name". Now I want to merge same plot no if the land area is same if differ then I want to leave as it is. And another thing I want to do that the all land owner name is merge in a row.
View 8 Replies
View Related
Apr 16, 2007
I want to merge cell text from different column's and row's into a empty cell using VBA and array. e.g (fName, lName, address, City)
I have seen many way's to merge cell text from same row.
View 4 Replies
View Related
