Is there a function that would return the contents of the most frequent.
i.e. in the example below with the function in cell C2 it would return Red (this been the most frequent entry in the cells A2:A10....
In a row i have : A1= 450B1=560C1=500D1=510E1=445F1=430G1= 420. Those values represent several weights of a product prepared in this case 7 times, now that i want to decide what is the most relative weight to use on my list, i need a formula to tell me what is the most frequent bin scored given a difference of 50 grs maximum. The formula should return the following answer : 400-450 which means that the most frequent weight bin is between 400 and 450 grs , now the 50 should be variable so if i change it somehow in the formula to 100 it should return 400-500 which means that the most frequent weight bin falls between 400 and 500 grs. Any smart frequency formula can do that?
View 6 Replies View RelatedI thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedIn this old thread (which the software did not let me continue) Yogi mentions 2nd mode and third mode etc.
[url]
In the above thread, Yogi has a nice formula for finding the "other mode", when the other mode is a tie. I am wondering - is there a simple formula
to find the 2nd (or 3rd) most frequent number. For example the (AFAIK non-existent) formula or function would act like this:
1
1
1
3
3
2
"modelarge(range,2)" should return 3
I have a column of names of people who have logged calls within a period. Some of these names obviously pop up more than once and I am wanting to report on those top 3 people who have logged calls in that period.
In short, I want the top 3 most frequent in a list.
I have an excel file which contains 59058 numbers ranging from 1 to 70 arranged in a matrix so they are from A1 to Q3474.
I need to find the most frequent number, the second most frequent, third most frequent and so on to the ninth most frequent number.
I am aware of the MODE function, but that function has 2 problems, it can only handle 255 numbers, and it only shows the most frequent number, and I'm also interested in the second most frequent number and so forth.
I have some data that looks like this:
Columns c through H
#N/A030016030037030037030037030016030037
I want to find the most frequently occuring value. These are not always numbers, so I can't use mode. Also, some of the columns may contain errors.
My normal formula for extracting the most frequent value would be:
=INDEX(C2:H2,MATCH(MAX(COUNTIF(C2:H2,C2:H2)),COUNTIF(C2:H2,C2:H2),0))
But this doesn't work for a horizontal list because match looks for the rownum.
I've tried using offset to get it to work, but either that doesn't work, or I don't know how to do it properly.
I have a need to look within a variable number of rows (but only a single column) and find the most common value(s) within that range.
If there is only one most common value, I return that value. If there's more than one most common value, I need to concatenate the values (if they are text) or average the values (if they are numeric).
how to find the least frequent Numeric value in a range - while the range is in ONE ROW or ONE COLUMN.
I am looking for a formula to find the least frequent Numeric value in a TWO DIMENSIONAL TABLE (A1:D50).
Is there a way to stick the option "Instant email notification" so it will not change unless I'll change it!
I am using a formula that finds the most frequently occuring text from a range of cells that have the text 'Ra' 'Ma', 'Mo' or 'Mi' in them (each cell has a drop down list with these text items only). I am currently using this formula to find which of the four text items appears most frequently in the range:
=INDEX(D6:D15,MATCH(MAX(INDEX(COUNTIF(D6:D15,D6:D15),0)),INDEX(COUNTIF(D6:D15,D6:D15),0),0))
This formula works fine in a case where there is more of one text item than any other, but when there are two items with the same number of entries, this formula comes back with the item that fulfils the criteria first - i.e. if 'Ra' appears 5 times and 'Mo' appears 5 times, then either could come back, depending on which appears first in the range.
The text items rate in importance with 'Ra' being the most important, then 'Ma', then 'Mo', then 'Mi' is the least important. What I am trying to do is, in cases where more that one text item appears the same number of times, get the formula to display the one that is the most important. So for example 'Ra' will always appear over 'Mo' if both have 5 entries, but 'Mo' will appear over 'Mi' if 'Mo' and 'Mi' both have the most entries.
I have a list of names in 1 column and I would like to be able to find out what name is most frequent and I'd also like to know how many times that name appears in that column.
Here is an example of what I'm looking for:
NAME
Most Frequent
No. of times they appear
[Code].....
Below is a small sample of Column A from a spreadsheet I'm working with. All cells in the column begin with a 6 digit number:
115383_BOSTON
115384_NEW_YORK
115385_PORTLAND
115402_LOS_ANGELES
115403_WACO
115010_SAINT_PAUL
115011_SAN_DIEGO
115130_WEST_NYACK
115021_CHAPEL_HILL
What formula would allow me to enter only a 6 digit number and return the entire cell contents, i.e, search for 115403 and get a return of 115403_WACO ? I have tried INDEX and MATCH, but I'm not getting the results I need.
I have inlcuded my workbook that I use for tracking the NFL season and I'd like to add in some team logos just to make it look a little cooler.
The attached workbook includes three sheets, the first of which uses a drop-down for selecting picks. The second sheet has the team logos and the third sheet feeds off the first.
I'd like for team logos to populate into the third sheet based on what is selected in the first sheet.
I've already tried a few methods, all unsuccessfully. I tried this [URL] which was a great idea but it didn't allow for the same image to be repeated potentially 100 times. I also tried a method involving named ranges and indirect lookups to the linked picture image but that would require a different named range for every person and every pick which isn't feasible.
if it's possible to just do a massive nested if statement with a vlookup to return an image but I haven't been successful in that either.
I would like cell CM2 to look at cell G2 and get the value there. Here is where it gets interesting. I would like it to reference sheet "LookupTables" in column A.
Cell G2 will be a 4 digit number.
Cells in column A of sheet "LookupTables" will be formatted like this: 3 digit number-4 digit number-4 digit number, like this "001-0001-0001".
If cell G2 exists in column A of the LookupTables sheet, (but it needs to ignore the first 4 digits and the last 5 digits of that number) then it should return that value in cell CM2. I would like it to look through the entire column A of the LookupTables sheet and return all numbers that match the above criteria, and separate them with a comma.
So, if G2 is 0001 and column A of the LookupTables sheet contains several values including:
001-0001-0006
004-0001-0187
098-0001-0874
098-0002-4356 (it should ignore this since the middle numbers don't match the value of G2)
then CM2 should display: 001-0001-0006,004-0001-0187,089-0001-0874
Also, if there are no matches, then it should just return a blank cell.
I am trying to figure out how to return the contents of last non blank cell in column B, based on the name in column A. So, if I choose "Sam", the result I am looking for is "blue". If I choose "Pete", the result I am looking for is "orange".
Sam
red
Sam
blue
Sam
Pete
orange
Sam
In Column A, in each cell in rows 1-10, there is various text that may or may not include "ABC" and "DEFG" as the first four letters. In Column B, rows 1-10, there is numerical data. What I would like to do in Column C, rows 1-10, is place a formula that would return the contents of the respective cell in Column B, but only where the first three or four letters in the respective cell in column A is "ABC" or "DEFG".
View 9 Replies View RelatedOn Sheet2 I have a table where I want M2 to do the following:
1.) Look at cell A2 where the name "John" is and B2 where the name "smith" is.
2.) Look at sheet1 and look in B2 and C2 for "John" and "smith"
3.) Once it matches the name, place the contents of sheet1, cell I2 into sheet2, cell M2.
So in short, match the name on sheet2 to the name on sheet1 and return the number in I2 to M2 on sheet2.
Maybe combining the persons name in to one column would make it easier?
Function Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
On sheet1, I have numbers and names. These names are also contained in Comments on sheet2, and i would like a function in Column M that matches the numbers with the names in the comments. Cell M1 I have manually filled for demonstration purposes.
Can this be done with a function or is this a VBA task?
I seem to be unable to locate a worksheet
function that allows me to determine, if a given cell contents is a formula
or a value.
I'm trying to do is pass the contents of a listbox to a function to sort it into alphabeticalorder. I get a error saying object required
Sub PopulateAll()
Dim lgLastRow As Long
Dim lgRowCounter As Long
Dim intCounter As Integer
Dim olb As MSForms.ListBox
For intCounter = 0 To UBound(vAllEnv)
Me.lstAll.AddItem (vAllEnv(intCounter))
Next intCounter
Set olb = frmOptions.lstAll.........................
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
I am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
So right now I have a spreadsheet that looks something like this:
A
B
C
D
[Code]....
As you can see, the stock names are slightly different in columns A & C (CORP. vs CORP, CO vs CO., etc). I need a formula in column D that searches column A for the first word in column C, and then retrieves the contents of that cell. I want to do this because I will then use a vlookup in column E to get the ticker for the stock.
Right now I have: =IF(ISERROR(SEARCH(LEFT(C1,FIND(" ",C1)),A:A,1)),A:A,"")
This formula searches column A for EXXON, but does not return the contents of the cell. Instead, it returns the contents of a different cell in the column.
I'm trying to get a "simple" function to return a number and not the #NAME?error!
I'm writing the following vba code. It's located in the sheet1 vba code area.
On the spreadsheet itself, on sheet1, column C, there is data from row 1 down to row 55. I have tried formatting the Column as General, text,etc.
Function Asset() As String
Asset = Range("C1").End(xlDown).Row
End Function
When I type into the spreadsheet =Asset() , I get the #NAME? instead of the number 55.
When I step through in debug mode, Asset shows Asset="55" , but my function doesn't return it!
I am trying to use a function to look at the value in one cell and return a value to the cell with the functional equation. I think I use the "IF" Function. But it is a little more complicated than I can do. In my sheet, there is a number in D3. I want to create an equation in D4 that evaluates the value in D3. If D3 is between 0 and 100, I want the equation in D4 to return the value 1; If D3 is greater than 100 but less than or equal to 200, I want D4 value to be 2; if D3 greater than 200 but less than or equal to 300, D4 return 4. I would like this to continue in increments of 100 until D4 equals 10.
View 1 Replies View RelatedIs it possible to add some code that will make the function return 0 if it would otherwise return #VALUE!.
Without getting to involved here is the main piece of code.
Public Function FixedCosts(RscNum As Integer, InstYear As Long, CalcYear As Long, MW As Double)
FixedCosts = numMonths * MW * Adjust * (CapCarryCostMonthly + OtherFixedMonthly + TransCap) / 1000
I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
View 5 Replies View RelatedWhen I try a MATCH function, I substituted the range through the ADDRESS function. But, it returns #VALUE error. When I manually typed the same range address, it produces the results. I've been behind this more than 8 hours still I can resist the heat on my cool head! But, I thought you coolest head guys need some heat to warm up for to-day's challenge.
View 9 Replies View RelatedI am using an array formula like this in cells A2:H100 of a worksheet:
=INDEX('Source Data'!$A$2:$Q$5000,SMALL(IF(('Source Data'!$I$2:$I$5000>=$O$1)*('Source Data'!$I$2:$I$5000<=$P$1)*('Source Data'!$M$2:$M$5000>0),ROW('Source Data'!$A$2:$Q$5000)-ROW('Source Data'!$A$2)+1,ROW($Q$5000)+1),ROW()-1),1)
The function must be present in all 99 rows to accommodate potential data, but there is rarely enough data to populate the entire sheet, leaving #REF! errors in some cells. Putting aside that using this many array formulae is sloppy programming, how do I craft the function above to return no value if the function evaluates to an #REF! error?