# "if Any" Function Or Similar: Check A Range Of Cells (B4:B35) And See If Any Of The Contents Are Less Than A Specified Cell (M1) And Then Show A Message

Oct 7, 2006

I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.

## Show Message Box If Cell Contents Changed

Nov 2, 2012

What i am trying to do:
1) check whether any value in column J, rows 7-18 is changed,
2) check whether the value is above the value in col H, respective row multiplied by 1,25,
3) if point 3 true, clear the contents of cells E24, F24, and show up a messagebox,
4) run another macro by pressing button in cell C24 in order to fill the E24 and F24 cells again.

What happens: Points 1-3 work perfectly well, but then i have a problem in point 4 - the messagebox of point 3 appears again and the work of macro of point 4 interrupts showing an "Application-defined or object-defined error".

The file with the code is attached : Example.xlsm

## Repetitive Macros- Display The Contents Of A Range Of Cells In A Message Box

Dec 6, 2009

I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;

## Conditional Formatting Look At The Cell Contents And Check If The Value Exists In A Range

Oct 17, 2008

I am trying to set up a conditional formatting which will look at the cell contents and check if the value exists in a range.

The range to compare will be over multiple columns and multiple rows.

## Formula- To Pull Cell Values Similar To A SUMIF Function (SUMIF(range,criteria,sum_range))

Oct 25, 2007

I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.

## Using IF Function To Show Highest Value Achieved Across Range Of Cells

Feb 17, 2014

Basically, I have a worksheet that shows test results for 6 separate tests. If an objective is met in a test then it is marked with an "X". If an objective is partially met then it is marked with a "/" and if it is not met then it is marked with a "." . I have now created a combined column where I want to collate whether an objective has been met at all across the 6 tests.

For e.g. if in the range H14:M14 there is an "X" then N14 should show "X". If there is no "X" but there is a "/" then N14 should show "/" and it there are neither values in the range then it will show "." .

I tried

[Code] ....

but it just came back with a formula error.

## If Value Is Not In Range - Error Message Then Check If Duplicates

Jun 29, 2014

I currently have the code below, and it checks if there are duplicates of the entered value on all sheets. I would also like to prevent users from entering a value that is not within a certain range. How to add this to my code? I've tried to add another If, but it just ended up looping.

Maybe it would be good to make something like:
1. first check if value is within range (between 1000000 and 3999999). if not within range: msgbox and delete entry.
2. then check for duplicates

Here is the code I have so far:

[Code] ......

## Show Contents Of Vertical Cells In Horizontal Cells

Nov 21, 2008

I am referring to the post made by NBVC at http://www.excelforum.com/excel-gene...xcel-help.html, Try: =IF(\$A1="",INDIRECT("A"&ROW()-ROW(\$A\$2)+COLUMN(B1)),"") in B2, copied across and down

I have a similar case but there are no empty rows between lists, what would be the formula to get the same results? (The transposed address should appear next to each first line of each block).

Earlier, I posted at http://www.excelforum.com/excel-gene...-one-cell.html and I got brilliant answers, I also would like to get benefit of the above mentioned formula but in cases when there are no empty rows between lists.

## Check Range & Show Blank Instead Of 0

Apr 23, 2007

See attached spreadsheet for example of the sheet I am using.

Problem 1.

Columns C and D show me figures when the number in col A is > 2500 or < 550 when these criteria are not met a 0 is displayed in the cell, is it possible to alter my formula so that nothing (a blank cell) is displayed rather than a 0 - I am wondering if there is something like null which I can use?

=IF(A4>2500,A4,)
=IF(A4<550,A4,)

Problem 2.

In column E (normal days) I want to display the value of A if it is > 550 but < 2500 - is there a way of doing this in a single formula? Again I would just like a blank to be displayed if the value of A does not meet the above criteria.

## Automatically Lock Other Cells And Should Show Error Message?

May 2, 2012

I need a macro where user choose a value from validation, automatically lock the other cells and should show an error message.

Here is what I am looking for. User will choose Yes or no from cell H15 validation. If user choose "NO" from the validation then all other cells has to be locked in the workbook automatically except Cell H15 and a msg box needs to appear stating: "Select Yes from the validation".

## Show Message If Empty Cells In Pivot Table

Aug 18, 2006

I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.

If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If

I have try out the code caption above but not the result as I want.

## How To Show A Message If A Cell In A Row Is Blank

Nov 19, 2012

I am new to excel vba. I want to show a pop-up message when user tries to save the workbook keeping cell(1,3) blank.

## Show Message Box When Certain Value Entered Into Cell

Feb 19, 2009

This seems like a very simple question but I can't find the answer that I'm looking for. I have a spreadsheet with a drop-down ( validation) list. Based on what the person selects, I then would like to have a message box to come that would direct them that certain cells then need to be filled in.

## If Statement To Check Part Of Cell Contents

Apr 4, 2007

IF statement that looks at a cell to see if it contains a word.

ie IF A2 has " Total" in it then do this

## Msgbox To Show Two Cell Contents

Jun 26, 2012

I am trying to assigned the values of two adjacent cell in a msgbox (columns AE and AF) as it is to far away for me to scroll and hiding the other columns will cause me to unhid it when I need to enter some information on it.

What I want to do, is when I double click activecell in column B, msgbox will pop and tell me the values nested in the same row under columns AE and AF (contract start date is : in column AE, contract end date : in column AF)

Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
MsgBox "Contract Start Date" & ActiveCell.Row.Offset(0, 30).Value & "Contract Start Date" & ActiveCell.Row.Offset(0, 31).Value

End Sub

## Show A Message When Cell Text Is Changed

May 16, 2006

In a range of cells (e.g. B26-B40) I have names (first name and second name or first initial and second name). This data is carried from sheet 1 to the second sheet via formula. Some cells may be blank as well.

A VB code to display a message when the user changes the name in any of these cells with data or adds a new name to a cell that is blank, in sheet2

## When Typing To A Cell Check If This Number Exist In A Range Of Cells (in Sheet 2)

Nov 28, 2008

I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..

## If Statement - Check Contents Of Cell To See If It Equals Date

Oct 19, 2011

I am trying and failing to write an if statement in excel (not vba) to check the contents of cell H3069 to see if it equals 29/06/2011.

I have written the following
Code:
=if(DateValue(H3069)="29/06/2011","Y","N")
which returns #Value!

## How To Check Activecell If Blank Then Copy Contents From Cell Above

Apr 16, 2012

with some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.

## Compare Cell Contents With Given Range Of Contents

Dec 30, 2013

I have attached a workbook stating my problem.

file1.xlsx‎

## Check On Cell Contents And If Match Change Another Cell

May 29, 2012

I want to check the contents of all the cells in S Column to see if it equals "Process Recover/Rebill"

If True, then Change corresponding cell in C Column to "Manual Correction"

I have this VBA and it doesn't look like anything is processing. It appears that I must have something missing in the If line..message about missing.

(tot_new is the number of rows of data) I begin in the 3rd row.

For Counter = 3 To tot_new
If Range("S" & Counter & ").Value = "Process Recovery/Rebill" Then
Range("T" & Counter & ").Value = "Manual Correction"
End If
Next Counter

## Find Text, Go To Found Cell & Show Message If More Than 1 Occurrence

Oct 1, 2008

I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro.

My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like.

Here is the code I presently have for this part of my macro.

Sub GetOpenFileName()
strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file")

If strFind = vbNullString Then Exit Sub

With Sheets(strSheetsMainCompProfile)
If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then
MsgBox strFind & " cannot be found on this sheet"
Else

## Show Cell Contents When Hovering Over Cell

Oct 7, 2008

If there is more data in a cell than can be displayed due to the size of the cell, is there a way to get a real-time preview of all the contents in the cell just by hovering over or clicking on the cell?

## Show Contents Of Cell If Cell Next To It Is Not Blank?

Jun 28, 2012

I have a column of dates in column E1:E100.
E1 = 25/06/2012
E2 = 02/07/2012
E3 = 09/07/2012
etc.

In column F1:F100 I will insert "Y" in the one of the blank cells next to one of the date cells in column E1:E100.

In cell B1 I want to reference where the cell in column F is "Y" then use respective date in column E.

e.g.

If i have "Y" in cell F1 then in B1 I want to show E1 (25/06/2012).
If i have "Y" in cell F2 then in B1 I want to show E2 (02/07/2012).
If i have "Y" in cell F3 then in B1 I want to show E3 (09/07/2012).
etc.

## VBA Check If A Cell Is Empty - Move 7 Cells Over And Check Again (Loop)

Aug 10, 2012

I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.

Code:
Sub Tester()

Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range

Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)

[Code] ......

## Returning The Contents Of A Non-empty Cell In A Range Of Empty Cells

Jan 8, 2008

I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?

I would do this with a series of nested IF statements if there weren't more than 30 of them!

## Macro To Set Current Time In A Cell Without Changing Similar Values In Other Cells

Mar 4, 2012

I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.

Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub

Even assigning value to variable does not work:

Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub

how to restrict the macro to change the value of current/active cell only without effecting other cell values?

## SUMIF Function: Sum A Range Of Cells Greater Than Whatever Is In Cell D8

Jul 18, 2006

I am trying to use the SUMIF function in excel where I want to sum a range of cells greater than whatever is in cell D8. Here is what I tried to use, but it doesn't work. SUMIF(A2:A10,>D8,B2:B10)

The content in D8 can change because the user makes a choice from the drop-down list and a number pops up in D8 that is referenced to their choice.

## Message Box For Range Of Cells

Oct 20, 2009

In cell E12, I have a drop down list of choices. I am using a code that will display a message box whenever a particular choice is picked from that list.

## Function: Cell Contents Formula Or Value

May 18, 2006

I seem to be unable to locate a worksheet
function that allows me to determine, if a given cell contents is a formula
or a value.