I have a piece of my macro that creates a chart on the second sheet in my workbook.
However, it tends to appear way off to the right, and then I have to readjust it every time to be where I'm working (columns A-D approx.)
Can I improve the move to specify it to place the graph in a certain
All I'm currently doing is:
ActiveChart.Location Where:=xlLocationAsObject, Name:="Sheet2"
I need to move characters from the end of a string to the beginning.
I have a list of Exact stings that are allowed. I need to move this allowed string to the beginning.
JAN
JANS
JANTX
JANTXV
If "TR" or "T/R" are at the end of the allowed Exact string, I need that removed completely.
i.e.
JANTR = JAN
JANT/R = JAN
JANTXT/R = JANTX
PN
Desired result
1N3595UR-1JANTX = JANTX1N3595UR-1
1N4992JAN = JAN1N4992
2N1711JANS = JANS2N1711
1N4148UR-1JANTXVTR = JANTXV1N4148UR-1
Would any know a macro code to make the enter key function when used move down one cell and to the left ? Example. I am in cell B1 and I hit enter and the cursor moves to cell A2.
View 9 Replies View RelatedI need an OFFSET function to start off by moving down 1 row from the starting point and then on the next run through the loop, to move down 2 rows, then 3 rows, etc.
Code:
Workbooks(Thisname).Worksheets("Run Set Up").Range("Duration").Offset(1, 0).Value = Workbooks(Filename2).Worksheets("Front Page").Range("T20").Value
This is what I'm working with. At the moment, I have the value for the number of rows to move set to 1 because I can't figure out how I'd accomplsih what I need.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open()
Sheets("Houselist").Activate
Selection.QueryTable.Refresh BackgroundQuery:=False
Sheets("Front").Select
Range("A1").Select
End Sub
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name
2. Select Move or Copy,
3. Select Create a Copy
4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
I have a work book with 6 worksheets, sheet2 is called Maersk, sheet3 Mariana, and so on ....
I need a macro so when I type Mariana in sheet1 g20 and hit enter it go's to Mariana sheet .....
I have a macro that is auto opening a form to be completed, but it currently opens on the first row of data that has been inputted.
How do I get the macro to move to a new row immediately to stop people from over-typing the first row of data?
I need a macro that I can assign to a button so that it will jump the screen to a particular cell. I want it to select the cell in a chosen column in the same row as the cursor already was. So, if I'm in M10 and I hit the AK button, it'll jump to AK10. If I'm in F54 and I hit the AK button it'll jump to AK54.
View 2 Replies View RelatedI am trying to create a macro to do the following (Microsoft Excel 2002 SP3):
1 - Select the text from the active/selected cell (i.e. B1)
2 - Cut the text from B1
3 - Move to the cell directly above the active/selected cell (i.e. A1)
4 - Add a space to the end of whatever text is in A1
5 - Paste the contents that were cut from B1 after the text and space in A1
6 - Delete the row where the text was cut from (i.e. entire row B)
I have never written code for macro's before, only done recording, but just can't seem to get this sequence to work .
I've used the macro recorder to copy a cut and paste routine, but it won't play back correctly. Here's the macro I recorded:
View 7 Replies View RelatedI need to cut 2 rows when i put "V" in E column, and then to paste them below row that have in column A, "OLD".
Ex:
I have many rows with data like this:
.......A..........B.........C.......D......E
1...subject
2...notes
3...subject............................."V"
4...notes
5...subject
6...notes
...
25..."old" row...............................
I need to cut the row with "V" in column E and the below row, and paste them below row with "old" in A column, like this:
.......A..........B.........C.......D......E
1...subject
2...notes
3...subject
4...notes
...
23..."old" row...............................
24...subject............................."V"
25...notes
I've been using the record macro function to accomplish a lot of my formatting tasks for my work reports.
I'm running into a snag that I'm not sure how to fix. Essentially I want the program to recognized the term "Grand Total" and the cell to the right of it. Then I want those two cells to be moved to the far left.
The # of rows will continuously change but he column shouldn't change.
I've tried naming the cell selection to have it moved but I can't seem to make it work.
When I use the record macro function and do a CTRL F search for "grand total", excel doesn't seem to recognize that I want that cell and the cell to the right to be the ones to move. Instead, whatever row of cells I create the macro with, it wants to duplicate the move with the same exact cell.
I have about 80 sheets in a workbook, and I would like to put each sheet into it's own workbook, and have that new workbook called by the value in Column A.
View 9 Replies View RelatedI have a workbook with 52 worksheets.
6 are hidden, 46 are visible.
I am trying to move a worksheet to the end of the workbook and rename as the next sheet.
It works the first time I run it (it renames the worksheet to Client51, the new last worksheet) but after that it gives me a 1004 error 'cannot rename a sheet to the same name as another sheet...."
Here is the macro I am using:
Sub rename_client()
Dim NewName As String
ActiveSheet.Move Before:=Sheets(Sheets.Count)
NewName = "Client" & Sheets.Count - 2
ActiveSheet.Name = NewName
End Sub
I have a workbook with two worksheets in it. The first "TO DO" and the second "Completed". In "TO DO", I have rows of tasks starting in row 4 (row 3 is my header), going to 200. What I'd like to have happen is when I put a "C" in column C, it moves the entire row to the "Completed" worksheet, greys it out and removes it from the "TO DO" worksheet. Then if I remove the "C" from the "Completed" worksheet, it moves it back to the bottom of the list. I already have a macro to resort it based on "priority" in column E.
View 9 Replies View RelatedI started a project where I want to export data from Access (only 2 columns but # of rows vary every day). When the data that is copied to the first tab is a week old and is a Tuesday I want to copy and paste these values in the next tab.
View 9 Replies View Relatedfind and move VBA macro - funky when WhatToFind in more than one row
Making a program that will find a value input by the user, and move the row of the cell that value is found in to the top of the list.
Works perfectly if there is only one row containing the search string. If more than one row contains the search string, it moves things to odd places.
here's the
Sub FindAndMoveToTop()
Dim FirstCell As Range
Dim NextCell As Range
Dim WhatToFind As Variant
'Window prompt allowing user to define WhatToFind
WhatToFind = Application.InputBox("What are you looking for?", "Search", , 100, 100, , , 2)
'If WhatToFind is a value and not blank, move on
If WhatToFind <> "" And Not WhatToFind = False Then
'Start with first worksheet
Worksheets("Sheet1").Activate
'Start at first cell
Range("A1").Select
'Find the first cell containing WhatToFind (specified by user)
Set FirstCell = Cells.Find(What:=WhatToFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
'If FirstCell exists, move on
If Not FirstCell Is Nothing Then
'Ok, First Cell is set
FirstCell.Activate
'Keep going...
I regularly receive a file with a column called ‘Project Key’ which for some unknown reason can be located anywhere in the worksheet i.e. in any column from A: to BZ and beyond.
What I would like to have is a macro that finds the column ‘Project Key’ and moves it from it’s current position and moves it directly after a column call ‘XXX’ and delete the blank column where it orginally was. There would be no need to check if the columns exceed Excels maximum as my file never gets that big
Macro, which can cut/Paste from sheet "Pastin" to Sheet "Robot".
The input in sheet Pastin is veritical and the the result is in a row horiontsal.
There can be no references between the names for the columns or rows, only the cell to move.
I would like it to be so when I run the macro it example move it to sheet robot from row A3, and if I do again it make the next one from Row A4.
What I want to move can be seen in below.
Cell on the left is sheet "Pastein" and cells on the right is sheet "Robot"
Special is that one move have to be taken from on cell comma separated input, so it goes to sheet "Robot" for each text/number, between the comma.
I have attached a test sheet to work with also.
[Code] ...
Testmove.xls‎
I'm looking for a macro to select data from a larger data set, and then put it in another worksheet. Basically, I want to select any cell in column A that contains "SO5" and move those to the column A of a separate worksheet. Then, for each cell that contains "SO5" would like to move to the right 5 columns and down 3 rows and select from that cell all the way to the end of the table. There may or may not be data in all of the table cells, so the selection should be based off of the column headers which will always have values. I would like to take that data and put it with the corresponding "SO5" in the new sheet.
Here's a sample:
MacroSample.xlsm
This is a simplified version, but I'm trying to get the data from sheet1 into the format in sheet2. Keep in mind that the number of columns and rows may change so it needs to be as dynamic as possible.
I have been trying to do this for 3 days using "Record Macro", but something always seems to be messed up. The main problem is that the worksheets are protected and the macro asks for the password.
Here is a calendar sheet that I've been working on. It contains the calendar on sheet 1(not important) and a client roster on sheet 2. The client roster gets filled quickly, and obviously gets unorganized. What I'd like to do is create a macro so that when a date is entered into column AA (when a client is discharged), that entire row is moved onto sheet 3 (Discharged). At the same time, I'd like all of the names in column A alphabetized.
I even tried to create an "Organize" button so that the users could just click it and alphabetize. The problem I ran into with that was that the users are using Office 2000, and the names get alphabetized but all of their information no longer matches up.
Below is my the macro that I recorded. I want to copy and paste the same information to a new location everytime. The macro tells it to go to cell IV1, end left, then I want it to go right one cell regardles of the cell location. Here it tells it to got to ("K1"). It will do this everytime and I do not want it to go to K1, just move right one time and then paste the information.
View 3 Replies View RelatedI am just getting started and have over 1000 items in the list. I want to be able to run a macro that would take the root portion of the image link and then replace the 'imagename.jpg' with 'modelnumber.jpg'
So start with
Column 1 www.photobucket.com/a/aa/a/imagename.jpg
Column 2 LAT-NR460
and end up with
Column 1 www.photobucket.com/a/aa/a/LAT-NR460.jpg
Column 2 LAT-NR460
Column 1 could start empty or just with the root.
Need the code to put into a command button which jumps from the cell selected, X number of cells to the right. Also will need the code to jump back again when clicking on a different command button.
View 5 Replies View RelatedI need to be able to copy a worksheet from my ActiveWorkbook into a new workbook and save that new workbook. No problem doing that, the following code does it:
Code:
Dim wb As Workbook
Worksheets("Alpha").Copy
Set wb = ActiveWorkbook
wb.SaveAs "Master.xls"
wb.Close
Where I am running into the problem is I am needing to copy the 2nd worksheet form about 10 different workbooks into this same workbook.
I have this macro which ranks in reverse order col AA , I need to get the macro to do this ranking in col U .
The smallest number would be ranked 1 to the highest number ranked last .
All I need is the current result too go into col U and not col T when I run macro .
Please ignore the Value error in col T they don't matter at all .
Sheet1  STUVWXYZAA1Fsz   PtsFwinFplNo.Swin213#VALUE!  Â
SCRSCR1SCR3135   7.52.427.2413#VALUE!  Â
SCRSCR3SCR5132Â Â Â 4.51.6545.36131Â Â Â 5.51.855.17134Â Â Â 5.51.865.88133Â Â Â 5.51.875.491310Â Â Â 266.5819.610138Â Â Â
184.5916.911136   164.5101312137   102.81114.21313#VALUE!   SCRSCR12SCR14139   185.51317.8
[Code] ..........
i have this macro from this webiste to move every 2nd cell to the row above...(ie B1---after macro---becomes A2) I want this macro to be able to do exactly the same but instead of having a cell, it will have a row...
Code:
Sub moveDefs()
Dim i, LastRowFrom As Integer
'Identify the last row of the rule set that contains data
[Code]....
I have an issue with groups of data in a row, that I need to copy into a new row beneath the original. I need a formula or VBA that will perform this function:
If any data is present in columns AG-AK, then copy that data into a new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
If any data is present in columns AL-AP, then copy that data into another new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
I would like to include code to move or copy various csv files from one computer across a network to other computers.
To date the best I have come up with is a method of running a batch file that executes the action.
Sub moveTKRS()
Call Shell("C:MoveTKRS.bat", vbNormalFocus)
End Sub
I would rather a more direct code that does not require a batch file.